4200 CommandCenter™ Display

  • Available factory-installed on 6R, 7-210R and 7-230R Tractors
  • Comes with documentation in base price
  • Easily add and change features as your needs change
  • Permanent, non-transferable AutoTrac activation optional
  • 4200 CommandCenter display 4200 CommandCenter display

    The 4200 CommandCenter ships from the factory with these three features included with the display and machine purchase so that you can easily take the first steps on your precision ag journey:

    • AutoTrac™ guidance
    • Documentation
    • Data Sync

    Combine the display with a StarFire™ Receiver, and you are ready to get started with automated guidance by creating maps showing work completed and, if you have JDLink™, wirelessly sending your data to the John Deere Operations Center. If you don’t need automated steering, you can deduct AutoTrac when ordering your machine. If you want to do even more, you can add a 4200 CommandCenter Section Control Activation for precision control of crop inputs.

    NOTE: You will need an AutoTrac activation to use the Section Control functionality with a 4200 CommandCenter display.  

     

  • Sometimes a job on the farm does not require intense Precision Ag management practices. When this is the case, the 4200 CommandCenter™ is just the tool for the job. The 4200 offers the ability to run core Precision Ag features like AutoTrac™ guidance, Documentation, Section Control, and Data Sync.

    There are two levels of activations that can be ordered on the 4200. The first is the CommandCenter AutoTrac Activation, enabling operators to consistently drive the same guidance path pass to pass. The second is the 4200 Section Control Activation plus CommandCenter AutoTrac Activation. This combines the ability to use AutoTrac on a machine with the value of Section Control, eliminating overlap on critical field operations.

    Data Sync enables operators to automatically send data to John Deere Operations Center. Producers can analyze the data from completed fields or view where field work is in process, making it easier for them to make operational decisions. Data is available to analyze through the John Deere Operations Center from any internet-connected device, allowing producers to make important production decisions and giving operations the ability to invoice work recently completed.

     

  • The Generation 4 CommandCenter was designed to provide a consistent user experience by providing full screen viewing of more run page modules, shortcut keys, and precision agriculture capabilities.

    Expect easier setup, along with increased operator confidence thanks to a simple, customizable interface. The improved design of the Generation 4 CommandCenter also aids in an optimal operating experience and maximizes uptime.

    In order to increase your efficiency, take advantage of the following features offered by the Generation 4 CommandCenter:

    Layout Manager
    Layout Manager selection page Layout Manager selection page
    Layout Manager application Layout Manager application
    • Easily create page views that meet user needs and that are also equipped with default run pages.
    Language and units
    Switch between active and alternate language on the display Switch between active and alternate language on the display

    Easily switch between languages with the option to set the active and alternate language. Configure the shortcut bar to include the language toggle allows different individuals to easily switch the display between languages.

    Users and access

    Users and access allow the owner or manager to lock out certain functions to prevent operators from accessing or changing settings. Lock-out functions are managed with a defined pin for the administrator.

    The Generation 4 CommandCenter can be set to one of two profiles, administrator or operator. The administrator profile is always set to the full access group. This group allows unlimited access to all the features and can lock and unlock features in the operator profile.

    Machine Monitor
    Machine Monitor page Machine Monitor page
    • The Machine Monitor application provides you instantaneous readings about the status or condition of your machine.
      • This application shows parameters such as engine speed, coolant temperature, and ground speed.
    Work Monitor
    Work Monitor page Work Monitor page
    • The Work Monitor application displays performance information about the task being performed by the machine.
      • You are shown averages, totals, and productivity of the machine, such as area worked, average working speed, and fuel usage.
      • Work set up places the settings needed to properly setup features such as AutoTrac™ guidance, Documentation, and Section Control in a single location. Settings include:
        • Client, farm, and field
        • Crop type
        • Machine and implement dimensions
        • Variety/hybrid and planting/seeding rates
        • Variable rate prescriptions
        • Product and application rates
        • Application rates through the implement screens
    Operator's Manual
    Access the latest operator’s manual on the display Access the latest operator’s manual on the display

    Stay up to date on the latest Gen 4 features and enhancements with the Gen 4 Operator’s Manual at the user’s fingertips. With each bundle update, the Gen 4 display automatically receives the latest Gen 4 Operator’s Manual which means less time locating a paper copy and ensuring the most up-to-date information is always available.

    Video capability

    The video application on 4600 CommandCenter and 4640 Universal Display has been redesigned to improve user interface and prepare for future enhancements. Features include the ability to name and configure cameras for viewing and scanning.

    • Machines equipped with a 4200 CommandCenter are equipped with one video input, and the 4600 CommandCenter has four video inputs.
      • You can set a variety of triggers. With each trigger, the image appears on the display.
    Flags
    View of run page with flag options View of run page with flag options
    • Mark areas in the field that need special attention such as rocks, tile lines, or weed pressure.
      • Flags previously recorded on the Gen 4 or GreenStar™ 3 2630 Display can be transferred between monitors.
    Field boundaries
    Boundary creation from coverage Boundary creation from coverage
    Headland creation Headland creation
    • Manually drive field boundaries with the Generation 4 CommandCenter or import existing boundary information from the GreenStar 3 2630 Display or John Deere Operations Center. Gen 4 documentation data can be used to create boundaries from coverage within the John Deere Operations Center.
    Automatic base station switching
    Setup base stations in Fields and Boundaries applications Setup base stations in Fields and Boundaries applications
    • Producers using John Deere RTK Radio 450 or 900 can link a base station to a desired client, farm, or field. This allows automatic switching to the associated base station when changing fields. The ability to import base station assignments into Operations Center and send back to machines will be available at a later date.
    Dual-display mode
    Dual display Dual display
    • Generation 4 CommandCenter may be configured to run with the following John Deere displays connected at the cornerpost of a John Deere tractor:
      • GreenStar 2 1800 Display
      • GreenStar 2 2600 Display
      • GreenStar 3 2630 Display
      • 4640 Universal Display
      • 4240 Universal Display

    NOTE: Vehicle applications are always located on the Gen 4 CommandCenter.

  • The  ability to remotely view the machine’s settings, performance, yield, acres, and other information is highly valuable when managing or supervising an operation. It is imperative that your equipment keeps running productively and that you are enabled to provide remote support to improve the quality and efficiency of work while saving time and money. RDA enables you to get help with machine settings or identify a problem and receive assistance in navigating through the steps needed to resolve the issue.

    Value of RDA:

    • Improved confidence in precision farming applications for all operators
    • Increased productivity with quicker problem resolution
    • Improved service from John Deere dealer and support personnel
    • Increased profitability by keeping equipment moving
    • Reduced labor and travel costs
    • With the 19-1 software update, the Gen 4 displays no longer require the operator to accept for remote view
    RDA on desktop computer RDA on desktop computer
    RDA on smartphone RDA on smartphone
    RDA showing 4600 CommandCenter™ Display – remote view RDA showing 4600 CommandCenter™ Display – remote view
    RDA showing GreenStar™ 3 2630 Display – remote view RDA showing GreenStar™ 3 2630 Display – remote view
  • Gen 4 applications and subscriptions allow data to be transferred from the display to the John Deere Operations Center for job reporting and analysis using Wireless Data Transfer (WDT) or Data Sync.

    • With WDT, you can manually send data to the John Deere Operations Center for review.
    • Data Sync automatically sends your data to the Operations Center, avoiding the need for manually exporting the data. 

    Wirelessly sending data helps you save time and money while increasing productivity. Wirelessly transfer setup, prescription, and documentation files securely between office, mobile devices, and 4640/4240 Universal Display or 4600/4200 CommandCenter™ Display, eliminating the need for USB transfer. This increases your uptime and productivity, reduces the risk of data loss, and enables easy data sharing and more timely decision making.

    Through the John Deere Operations Center, you are in control and can easily share files with a John Deere dealer and other trusted advisers.

    NOTE: For users in areas of poor cellular coverage, data can be exported using a USB flash drive.

  • The Generation 4 CommandCenter™ and Gen 4 Universal Displays display are an AEF ISOBUS compatible display.

    An easy plug and play between implements, displays, tractors, and other products is required today in daily business. This is why within agriculture and forestry, an industry standard, ISOBUS, is used for communication between these products.

    #

    From the ag industry, the Agricultural Industry Electronics Foundation (AEF) was initiated in 2008 to have a common forum among manufacturers to define the ISOBUS standard further, define and conduct ISOBUS tests, accelerate adoption, label compatible products, and to communicate this to dealers and customers. John Deere is one of the seven founding members of AEF and is very engaged in the organization.

    To better ensure ISOBUS compatibility, the AEF developed new functionalities, i.e., auxiliaries (AUX) and Task Controller Section Control (TC-SC,) in addition to the well-known universal terminal (UT). They are also the basis for the certification of ISOBUS products. An ISOBUS functionality can be described as an independent ISOBUS product and the concept is extendable for later additions of functionalities.

    Gen 4 CommandCenter and Gen 4 Universal Displays support the following ISOBUS features:

    • 4600/4200 CommandCenter and 4640/4240 Universal Display:
      • Universal Terminal (UT)
        -> ISOBUS sprayer, seeder, planter, fertilizer spreader, manure applicator, and many other implements can be operated through the UT functionality.
      • Task Controller Section Control (TC-SC)
        -> With TC-SC, ISOBUS compliant implements like sprayers, seeders, planters, fertilizer spreaders, and manure tankers can be used with automatic Section Control.
      • Task Controller Basic (TC-Bas)
        -> With TC-Bas, documentation with ISOBUS compliant implements in the standard data format of ISOXML is possible. Also, totals like area, amount, etc. are recorded directly from the implement.
      • Task Controller geo-based (TC-Geo)
        -> With TC-Geo, location-based documentation with ISOBUS compliant implements in the standard data format of ISOXML is possible. Also, Client, Farm, Field, Boundary, Products, Crops (incl. Varieties), Prescriptions, Operators, Tasks, Comments are recorded directly from the implement.
      • Auxiliary Control (AUX-N)
        -> With AUX-N, additional control elements that facilitate the operation of complex equipment, such as a joystick; also, the capability of controlling implement functions by means of an additional control element.
    Gen 4 system page includes info on ISOBUS compatibility Gen 4 system page includes info on ISOBUS compatibility
    Individual ISOBUS features with details are highlighted Individual ISOBUS features with details are highlighted

    To stay up to speed on which implement and product complies with which ISOBUS features, please visit the AEF website and sign up for the database. It combines tractor, sprayer, and display combination to determine compatibility.

    Sign up and log in page to the AEF database – user is able to create an account and check on compatibility for products. Sign up and log in page to the AEF database – user is able to create an account and check on compatibility for products.
  • Over-the-air activations were enabled with the 18-1 software update to the Gen 4 displays. With that software update or newer, a John Deere dealer can send activations to a Gen 4 display without leaving the office. Over-the-air activations also eliminate the need to manually enter long activation codes like was done previously. This also eliminates multiple trips between the cab and the farm office to enter codes and verify completion.

    NOTE: Over-the-air activations requires a current JDLink™ Connect subscription and Mobile Telematics Gateway (MTG). Planter and platform activations and subscriptions cannot be updated over-the-air.

Related Products