RC20 Series Rotary Cutters
- Easy-to-maneuver
- Adjustable cutting height
- Balanced blade pan
- Puncture-resistant rear tires
-
The round-back deck design on the RC20 Series Rotary Cutter enables easy maneuvering into tight corners and around trees, fences, and other hard-to-reach areas.
-
The front deck and deflector support are flush with the deck on the RC20 Series Rotary Cutters. This allows water and debris an unrestricted exit off the top of the deck.
These deflectors are available in:
- Rubber or chain on the front
- Metal or chain on the rear
-
Adjusting the cutting height is easy. Along with adjusting a tractor's three-point linkage, simply move the support bar to the desired cutting height.
The RC20 Series Rotary Cutters go as low as 3.8 cm (1.5 in.) or as high as 22.9 cm (9 in.).
-
There is one standard blade pan for all four sizes of the RC20 Series Rotary Cutters. The blade pan is stamped instead of fabricated and is statically balanced to reduce vibration.
The blade bar is thicker for added durability.
-
The lower hitching point on the RC20 Series Rotary Cutter accommodates a reversible front hitch for smaller or older tractors.
-
The RC20 Series Rotary Cutters have a lower lip (Z-profile), which extends from the skid shoes to where the apron opens up. This Z-profile increases the overall durability and strength of the rotary cutter.
-
Choose a laminated or solid rubber rear tire for the RC20 Series Rotary Cutter. Both are puncture resistant.
The laminated tire is longer lasting and provides more support when working in sandy or lighter soil conditions.
-
The iMatch hitch system converts a tractor's 3-point hitch to fixed hooks and attaching points for a super-quick connection (the iMatch hitch is sold separately).
-
Overall width
129 cm
51 in.Overall length
220 cm
87 in. -
w
w2
2O
O -
PTO horsepower
13-33 kW
18-45 hpTractor PTO
540 rpmPTO category
ASAE 3 -
g
g3
3H
H -
d
dS
ST
T -
Type
Lift-typeCategory
Cat. 1, adaptable to Cat. 2iMatch? compatible
YesAutoHitch? compatible
Yes -
Thickness
11 gauge
3 mm
0.12Shape
Flat-open round backType
Single -
s
s1
1T
T -
Cutting width
122 cm
48 in.Cutting height
4-23 cm
1.5-9 in.Cutting diameter
0-2.5 cm
0-1 in.Cutting chamber depth
19 cm
7.5 in. -
Tip speed
66.5) m/s
13,090 fpmType
Heat treated, suctionThickness
13 mm
0.5 in.Width
76 mm
3 in. -
Type
Round pan-typeDiameter
567 mm
22.3 in. -
Quantity
1Type
Solid rubber or laminatedDiameter laminated
381 mm
15 in.Width laminated
95 mm
3.75 in.Diameter rubber
381 mm
15 in.Width rubber
95 mm
3.75 in. -
Markings
StandardFront deflector
StandardRear deflector
Standard -
s
sL
L -
Time period
1 yearGearbox
1 year -
a
aD
D