HX14 HX14 Rotary Cutter

  • Larger, more durable gearboxes
  • Large-diameter, round-pan blade holders
  • Tractor hookup available
  • Max Flow cutting chamber for a clean cut
  • NOTE: Only for single spindle and multi-spindle.


    John Deere rotary cutters lead the way with innovative design, superior performance, and proven durability. Valuable features such as the Double-Decker™ design and Max Flow cutting chamber prevent water and debris from accumulating on the smooth, dome-shaped top deck while the flat bottom deck absorbs the punishment from rocks and stumps.


    The top deck stays smooth - no dents, no dings, no holes. The internal supports sandwiched between the top and bottom decks are key to the smooth and structure-free Max Flow cutting chamber, while at the same time provide added strength and durability.


    To help promote safe operation, John Deere rotary cutters are equipped with front and rear safety-chain shields. John Deere rotary cutters continue to advance in value with powerful gearboxes, blade holders, and compatibility with a wide range of tractors.


    Here are situations when a rotary cutter provides value:

    • Clipping pastures encourages grass growth, optimizing valuable pasture acreage.
    • Cutting grass and stalks helps control insects.
    • Routine cutting keeps weeds from reseeding.
    • It is the most cost efficient way to cut roadsides, parks, cemeteries, airport fields, hydro, gas, and telephone easements, and all other types of open properties.
    • Cutting grass waterways encourages root development and helps prevent erosion.
    • Knocking down stalks such as cotton, corn, or milo speeds up decomposition. This is essential in no-till and minimum-till fields.
    • Clearing out brush.
    • Control undergrowth and grass in orchards, vineyards, and groves.

    Decide what model to use based on:

    • The size of the area to mow versus the size of the machine – the bigger the area to mow, the bigger the mower needs to be in order to be efficient during mowing hours. Similarly, the limitation of a small area will guide operators to use a smaller mower.
    • The amount of time and frequency it will be used – for longer hours and more frequency, choose a heavier duty machine.
    • Tractor compatibility – if there is a tractor the operator will be using, look for the tractor compatibility sheet to identify appropriate options.

    John Deere rotary cutters are available in two duty-level categories:

    • Mid-duty
      • MX models are available in 1.5-m (5-ft), 1.8-m (6-ft), 2.1-m (7-ft), 2.5-m (8-ft), and 3.2-m (10-ft).
      • This duty-level category cuts brush up to 50.8 mm (2 in.) in diameter.
    • Heavy-duty
      • HX models are available in 3.2-m (10-ft) and 4.2-m (14-ft).
      • This duty-level category cuts brush up to 76.2 mm (3 in.) in diameter.
      • HX6 is available in 1.8-m (6-ft) and the HX7 is available in 2.1-m (7-ft) cut widths; they cut brush up to 101.6 mm (4 in.) in diameter.

    NOTE: HX models are heavier built to cut at a 101.6 mm (4 in.) capacity level more frequently and for longer durations.

  • Cross-section of exclusive Double-Decker design Cross-section of exclusive Double-Decker design

    The patented Double-Decker design improves strength and cutting performance while reducing top deck rust. Two welded decks include a 3-mm (11-gauge, 0.118-in.) to 3.5-mm (10-gauge, 0.138-in.) thick upper deck, depending on the model, and a 3-mm (11-gauge, 0.118-in.) to 4.5-mm (7-gauge, 0.177-in.) thick lower deck, depending on the model.


    Internal stiffeners are sandwiched between the decks to add extra strength and rigidity.


    The Double-Decker design also provides a sturdy base to support the gearcases. Gearcases need this sturdy base to resist the bending loads imposed upon them when blades contact immovable objects or the ground.


    The bottom deck is the main defense against rocks and field debris, to help protect the top deck from impacts so it will retain its smooth form.

  • Gearcase and blade holder shown Gearcase and blade holder shown

    The John Deere gearboxes:

    1. Large seals
    2. Large housing
    3. Large output shaft
    4. Precision forged bevel gears
    5. Large bearings
    6. Stump jumper

    Re-engineered gearcases and blade holders provide the following:

    • More horsepower
    • Faster blade-tip speed
    • Better performance
    • Quieter operation
    • Increased durability
  • Gearcases are John Deere designed for reliability and dependability:

    • Center gearcase – 160 continuous hp or 200 peak hp
    • Outer gearcase – 100 continuous hp or 150 peak hp

    Heavy-duty, tapered roller bearings and precision gears help ensure long life.


    Output shafts are splined, not just keyed, for extra strength and durability.

    Heavy-duty bowl support Heavy-duty bowl support

    Gearcases mount on heavy-duty bowl supports, which are continuously welded to the top and bottom decks. These bowls provide a lifelong base of support for the gearcase/blade holder mechanism.


    The HX14 comes standard with five year warranty.

  • Suction blades
    Suction blade Suction blade

    Suction blades provide additional lift action for picking up downed material. The blades are 1.3 cm x 10.2 cm (0.5 in. x 4 in.) in size and heat-treated for long wear life.


    A fast blade-tip speed (up to 16889 fpm) ensures clean cutting and fine shredding of material.

    Flat blades
    Flat blade Flat blade

    Flat blades are effective for any materials not downed and require suction for lifting.


    Flat blades require less horsepower and have a cutting edge on both sides. Only available with double-blade system.

    Dual blades (bar-type bladeholder only)
    Dual blades Dual blades

    Dual blades are effective for increased shredding of crop residue.


    The dual blades consist of a 1.3-cm x 10.2-cm (1/2-in. x 4-in.) lower suction blade and a 1.3-cm x 7.6-cm (1/2-in. x 3-in.) upper suction blade.

  • Lift type
    Lift type (shown with iMatch™ hitch system) Lift type (shown with iMatch™ hitch system)

    The lift-type versions fit tractors with Category 2, 3, or 3N 3-point hitches (with or without Quick Hitch).


    NOTE: The lift-type versions require a larger tractor than other versions. For HX10 Lift-Type Rotary Cutters, the minimum-size tractor recommended is a 6020 Series or equivalent. For HX14 Lift-Type Rotary Cutters, the minimum-size tractor recommended is a 7720 or equivalent. Refer to the tractor's operator's manual for ballasting instructions. The pull-type versions of the HX10 Multi-Spindle Rotary Cutter require a tractor with a minimum of 50 power take-off (PTO) hp. The HX14 pull-type versions require a tractor with a minimum of 60 PTO hp. Note that the type and volume of material being cut affect horsepower requirements.

    Pull type
    Pull type Pull type

    Parallel lift linkage helps keep the cutter level through all height adjustments. Cylinders are John Deere manufactured, meaning more reliability and durability.

  • Five-year limited gearbox warranty provided on every John Deere rotary cutter
    Five-year warranty on all flex-wing gearboxes Five-year warranty on all flex-wing gearboxes
    Five-year warranty on all rotary cutter gearboxes Five-year warranty on all rotary cutter gearboxes

    John Deere is so confident in the reliability of the gearbox that rotary cutters come with a 5-year limited gearbox warranty.


    There is also 1-year warranty on the complete machine, including drivelines, clutches, and many other components.

  • Cutting width
    4,200 mm
    165 in.

    Cutting height
    50 to 305 mm
    2 to 12 in.

    Cutting capacity
    76.2 mm
    3 in.

    Cutting chamber Depth
    257 mm
    10.5 in.

  • Tractor PTO HP range
    Minimum PTO pull-type 45 kW
    60 hp
    Minimum PTO lift-type 67 kW
    90 hp

    Tractor PTO
    1,000 rpm

  • Type
    Lift-Type, Pull-Type (Pull-Type has standard 10,000 lb; 4,536 kg, Safety Tow Chain)

    2, 3, 3N

  • Transport width
    4,350 mm
    171 in.

    Overall width
    4,350 mm
    171 in.

    Overall length
    2,972 mm
    117 in.

    Deck shape

    Deck type
    Double decker

    Deck thickness
    3.5 (10) mm
    0.141 (10) in.
    3.5 (10) mm
    0.141 (10) in.

    Side skirt thickness
    6 (3) mm
    0.25 (3) in.

    Approx. weight
    1,390 kg
    3,059 lb

  • Size
    ASAE Category 5; lift-type
    ASAE Category 4; pull-type
    ASAE Category 4 with Shear Bolt

    Non-seize, slip-clutch driveline, pull-type has equal-angle Category 4 driveline
    Shock absorbing shafts

  • Number

    HP rating
    Continuous 119 kW
    160 hp
    Peak 149 kW
    200 hp
    Continuous 75 kW
    100 hp
    Peak 112 kW
    150 hp

  • Thickness
    Single suction 13 mm
    0.5 in.
    Dual suction, upper 13 mm
    Dual suction, lower 13 mm

    Single suction 102 mm
    4 in.
    Dual suction, upper 76.2 mm
    3 in.
    Dual suction, lower 102 mm

    Single suction, dual suction

    75 mm
    2.95 in.

    Blade tip speed
    1000 RPM
    4,540 m/min
    14,896 fpm
    272 km/h
    169 mph

    Material flow system
    Max flow

    Single suction; stump jumper
    Dual suction; bar-type

  • Type
    Laminated (Pull-type has severe-duty Ag tire option)

    Row width adjustment

  • Front


  • a


  • Blade tip speed - 540 rpm

    Cutting capacity

    Cutting width

    Deck thickness - Upper - Lower

    Drivelines - Size - Main

    Hitch - Category

    Protection - Main

    Shielding - front/rear

    Side skirt thickness

    Tractor PTO HP range

Related Products