MX7 Rotary Cutter

  • Standard stump jumper blade holder
  • Smooth, easy-clean, dome-shaped top deck
  • Front and rear safety chain shields are standard
  • 5-year limited gearbox warranty
  • NOTE: Only for single spindle and multi-spindle.

     

    John Deere rotary cutters lead the way with innovative design, superior performance, and proven durability. Valuable features such as the Double-Decker™ design and Max Flow cutting chamber prevent water and debris from accumulating on the smooth, dome-shaped top deck while the flat bottom deck absorbs the punishment from rocks and stumps.

     

    The top deck stays smooth - no dents, no dings, no holes. The internal supports sandwiched between the top and bottom decks are key to the smooth and structure-free Max Flow cutting chamber, while at the same time provide added strength and durability.

     

    To help promote safe operation, John Deere rotary cutters are equipped with front and rear safety-chain shields. John Deere rotary cutters continue to advance in value with powerful gearboxes, blade holders, and compatibility with a wide range of tractors.

     

    Here are situations when a rotary cutter provides value:

    • Clipping pastures encourages grass growth, optimizing valuable pasture acreage.
    • Cutting grass and stalks helps control insects.
    • Routine cutting keeps weeds from reseeding.
    • It is the most cost efficient way to cut roadsides, parks, cemeteries, airport fields, hydro, gas, and telephone easements, and all other types of open properties.
    • Cutting grass waterways encourages root development and helps prevent erosion.
    • Knocking down stalks such as cotton, corn, or milo speeds up decomposition. This is essential in no-till and minimum-till fields.
    • Clearing out brush.
    • Control undergrowth and grass in orchards, vineyards, and groves.

    Decide what model to use based on:

    • The size of the area to mow versus the size of the machine – the bigger the area to mow, the bigger the mower needs to be in order to be efficient during mowing hours. Similarly, the limitation of a small area will guide operators to use a smaller mower.
    • The amount of time and frequency it will be used – for longer hours and more frequency, choose a heavier duty machine.
    • Tractor compatibility – if there is a tractor the operator will be using, look for the tractor compatibility sheet to identify appropriate options.

    John Deere rotary cutters are available in two duty-level categories:

    • Mid-duty
      • MX models are available in 1.5-m (5-ft), 1.8-m (6-ft), 2.1-m (7-ft), 2.5-m (8-ft), and 3.2-m (10-ft).
      • This duty-level category cuts brush up to 50.8 mm (2 in.) in diameter.
    • Heavy-duty
      • HX models are available in 3.2-m (10-ft) and 4.2-m (14-ft).
      • This duty-level category cuts brush up to 76.2 mm (3 in.) in diameter.
      • HX6 is available in 1.8-m (6-ft) and the HX7 is available in 2.1-m (7-ft) cut widths; they cut brush up to 101.6 mm (4 in.) in diameter.

    NOTE: HX models are heavier built to cut at a 101.6 mm (4 in.) capacity level more frequently and for longer durations.

  • Front safety chains (MX6 shown) Front safety chains (MX6 shown)
    Rear safety chains (MX6 shown) Rear safety chains (MX6 shown)

    Front and rear chain shields are standard equipment:

    • Offer protection for the operator yet allow uncut material to pass into the cutting chamber with minimal restriction
  • Suction blade (standard equipment) Suction blade (standard equipment)

    Suction blades provide additional lift action for picking up downed material. The blades are 1.3 cm x 10.2 cm (0.5 in. x 4 in.) in size and heat-treated for long wear life.

     

    The fast blade-tip speed ensures clean cutting and fine shredding of material.

    • Up to 88.5 m/sec (17416 fpm)
  • Five-year limited gearbox warranty provided on every John Deere rotary cutter
    Five-year warranty on all flex-wing gearboxes Five-year warranty on all flex-wing gearboxes
    Five-year warranty on all rotary cutter gearboxes Five-year warranty on all rotary cutter gearboxes

    John Deere is so confident in the reliability of the gearbox that rotary cutters come with a 5-year limited gearbox warranty.

     

    There is also 1-year warranty on the complete machine, as well as drivelines and other components.

  • Cutting width
    2,130 mm
    84 in.

    Cutting height
    25 to 241 mm
    1 to 9.5 in.

    Cutting capacity
    50 mm
    2 in.

    Cutting chamber Depth
    216 mm
    8.5 in.

  • Tractor PTO HP range
    Minimum 30 kW
    40 hp

    Tractor PTO
    540 rpm

  • Type
    Lift-type

    Category
    2, 3N

  • Transport width
    2,242 mm
    88 in.

    Overall width
    2,242 mm
    88 in.

    Overall length
    3,210 mm
    126 in.

    Deck shape
    Domed

    Deck type
    Double decker

    Deck thickness
    Upper
    3.5 (10) mm
    0.138 (10) in.
    Lower
    3.5 (10) mm
    0.138 (10) in.

    Side skirt thickness
    6 (3) mm
    0.25 (3) in.

    Approx. weight
    605 kg
    1,332 lb

  • Size
    Main
    ASAE Category 4

    Protection
    Main
    Slip-clutch driveline

  • Number
    1

    HP rating

    Center
    Continuous 56 kW
    75 hp
    Peak 75 kW
    100 hp

  • Thickness
    13 mm
    0.5 in.

    Width
    102 mm
    4 in.

    Type
    Suction

    Overlap

    Blade tip speed
    540 RPM
    4,932 m/min
    16,182 fpm
    296 km/h
    184 mph

    Material flow system
    Max flow

    Holder
    Type
    Round stump jumper

  • Type
    Puncture proof laminated (optional dual tail wheels)

    Row width adjustment

  • Front
    Chain

    Rear
    Chain

  • a
    a


    D
    D

  • Blade tip speed - 540 rpm

    Cutting capacity

    Cutting width

    Deck thickness - Upper - Lower

    Drivelines - Size - Main

    Hitch - Category

    Protection - Main

    Shielding - front/rear

    Side skirt thickness

    Tractor PTO HP range

Related Products