610 Integral Chisel Plow
- Offers a variety of sizes
- Implement warning lights enable safe transport
- Shovels and attaching hardware
- Sweeps and attaching hardware
-
The 610 Chisel Plow is available in a variety of sizes to help match tractor horsepower and work designs.
Model
Width
Type of fold
Standards
Three-bar integral 2.44 m to 6.10 m
(8 ft to 20 ft)Non-fold Rigid TruPosition™ Tru-Depth™ Typical percents of the residue cover that remains from the 610 are listed as follows (the percentages do not take into account variables such as the condition of the residue, speed, and soil type):
Starting residue cover (percent)
Remaining non-fragile* residue cover (percent)
Remaining fragile** residue cover (percent)
with
406-mm
(16-in.) sweepswith
51-mm
x
356-mm
(2-in. x 14-in.) chisel pointwith
102-mm x
368-mm
(4-in. x 14.5-in.) shovelwith
76-mm
x
610-mm
(3-in. x 24-in.) shovelwith
406-mm
(16-in.) sweepswith
51-mm
x
356-mm
(2-in. x 14-in.) chisel pointwith
102-mm
x
368-mm
(4-in. x 14.5-in.) shovelwith
76-mm
x
610-mm
(3-in. x 24-in.) shovel100
80
70
60
60
55
50
45
45
90
72
65
55
55
50
45
40
40
80
65
56
50
50
45
40
35
35
70
55
50
42
42
38
35
30
30
60
50
42
35
35
33
30
27
27
50
40
35
30
30
27
25
22
22
40
32
28
25
25
22
20
18
18
*Non-fragile residue includes crops like corn, sorghum, wheat (more than 45 bu).
**Fragile residue includes crops like soybeans, edible beans, peas, wheat (under 45 bu), sunflower, peanuts, cotton. -
The 610 Chisel Plow features a large 102-mm x 102-mm (4-in. x 4-in.) tubular steel mainframe.
Welded construction adds the inner strength that withstands twisting and pulling through demanding field conditions.
-
The rigid standard:
- Is in base equipment on three-section models
- Is 32 mm x 51 mm x 711 mm (1.25 in. x 2 in. x 28 in.)
- Design is suited for fields having few obstructions
- Will till to 203 mm (8 in.) deep
- Good clearance to handle heavy trash
- 711-mm (28-in.) underframe
- 305-mm (12-in.) spacing
The TruPosition standard:
- Is optional on all models
- Cast pivot assembly holds shank firm while working in the soil
- Is 32 mm x 51 mm x 711 mm (1.25 in. x 2 in. x 28 in.)
- Shank is replaceable without disassembly of the standard assembly
- Trip action is suited for fields having rocks or other obstructions
- 550-lb trip 711-mm (28-in.) standard will till to 203 mm (8 in.) deep
- 711-mm (28-in.) underframe
- 305-mm (12-in.) spacing
- Trip height of 254 mm (10 in.) for good clearance
- Slotted lower hole to aid in removing ground-engaging tools
The Tru-Depth standard:
- Is optional on drawn rigid and select drawn flexible models up to 838 mm (33 ft)
- Is 51 mm x 32 mm x 813 mm (2 in. x 1.25 in. x 32 in.); edge is bent for extra strength
- Designed to work in rocky ground and heavy draft conditions
- Will till to 305 mm (12 in.) deep
- Trip height of 279 mm (11 in.)
- 568-kg (1250-lb) trip force
- Excellent clearance to handle heavy trash
- 813-mm (32-in.) underframe
- 305-mm (12-in.) spacing
-
An implement warning light harness with a turn-signal module for two amber and two red lights are included as standard equipment for safe transport on roads.
The implement warning light harness requires one of the following:
-
Category 2, 3-point hitch with or without Quik-Coupler
- Category 3 and 3N, 3-point hitch with or without Quik-Coupler
Horsepower requirements
- The rigid and TruPosition™ standards require engine horsepower of 6 hp per ft to 10 hp per ft.
The Tru-Depth™ standard requires engine horsepower of 6 hp per ft to 14 hp per ft.
-
-
A 102-mm (4-in.) diameter container provides storage to give the operator easy access to the manual at the front of the machine. It is made out of a durable polyethylene and will keep the manual clean and dry in all weather conditions.
The container was designed exclusively for John Deere and the John Deere logo is shown on the lid.
-
A handy three-bar coil-tine harrow attachment fits compactly behind the chisel plow.
There is 305 mm (12 in.) of fore-aft clearance between the bars plus vertical clearance of 305 mm (12 in.).-
NOTE:
Use the harrow attachment only on machines equipped with sweeps; do not use with the
Tru-Depth™ standard.
-
NOTE:
Use the harrow attachment only on machines equipped with sweeps; do not use with the
-
f
fN
NT
T -
Rigid frame
Option 1
2.44 to 6.1 m
8 to 20 ftDrawn rigid fold
3-section
5-section
-
Rigid frame
Option 1
2.99 to 5.97 m
9.83 to 19.58 ftDrawn rigid fold
3-section
5-section
-
Rigid frame
Rigid over-center fold
3-section
5-section
-
o
o3
3M
M -
o
o8
8M
M -
h
hR
RH
H -
Option 1
Tractor 3-point hitchOption 2
Option 3
-
Standard
Option 1
Option 2
-
Standard
Option 1
Option 2
-
h
hD
D -
Tubing
High strength, box beam steel cross members: 10.2x10.2 cm
4x4 in.
Steel end tubes, welded construction: 5.1x10.2 cm
2x4 in.Number of ranks
Fore-and-aft
182.9 cm
72 in.Underframe clearance
Rigid and TruPosition™ standards: 71.1 cm
28 in.
Tru-Depth: 81.3 cm
32 in. -
s
s3
3I
I -
Option 1
Spec
3.2x5.1x71.1 cm
1.5x2x28 in.
Maximum operating depth
20.3 cm
8 in.
Underframe clearance
71.1 cm
28 in.
Spacing
30.5 cm
12 in.
40.6 cm
16 in.
Rigid standardOption 2
Spec
3.2x5.1x71.1 cm
1.25x2x28 in.
Trip force
249.5 kg
550 lb
Trip height
25.4 cm
10 in.
Maximum operating depth
30.5 cm
12 in.
Underframe clearance
71.1 cm
28 in.
Spacing
30.5 cm
12 in.
Standard: TruPositionOption 3
Spec
5.1x3.2x81.3 cm
2x1.25x32 in.
Trip force
567 kg
1,250 lb
Trip height
27.9 cm
11 in.
Maximum operating depth
30.5 cm
12 in.
Underframe clearance
81.3 cm
32 in.
Spacing
12, 16
Standard: Tru-DepthOption 4
-
g
gV
VC
C -
Centerframe depth control wheels and tires
Wing frame wheels and tires
Stabilizer wheels
Option 1
Stabilizer wheel frames with 5.90 - 15 4PR implement tires (optional on 2.4-m [8-ft] base models, standard on 4.9-m [16-ft] base models) -
Option 1
Rank spacing
30.5 cm
12 in.
Spike/coil dimensions
30.5 cm
12 in.
3-bar coil tineOption 2
Option 3
-
Option 1
Option 2
Option 3
-
Tubing size
Telescoping
Tongue weight rating
GVW
Wiring harness for transport lights
Hydraulic hoses and couplers
-
w
wD
D -
Opton 1
Option 2
Option 3
Option 4
Option 5
-
a
aD
D -
Horsepower per foot
Maximum depth
Miles per hour
Standard spacings - Inches
Transport width -Rigid frame
Working widths - Rigid frame