2680H High Performance Disk

  • Cover more acres at 10-14 mph (16-22.5 km/h)
  • Mix and bury residue for faster breakdown
  • Individually mounted blades
  • Provides a consistent field finish in spring or fall
  • Integral three-point rigid machine Integral three-point rigid machine
    Three-section drawn machine Three-section drawn machine

    The 2680H High-Performance Disk gives operators the ability to cover acres quickly, increasing their productivity. This two-season tool can operate up to 22.5 km/h (14 mph) in field.

     

    This tool is available in fifteen configurations from 2.4 m to 13.7 m (8 ft to 45 ft). The 2680H requires 34.25 kW/m (14 hp/ft), but in certain hilly, soft or wet conditions it may require an additional 25 percent engine horsepower to maintain operating speeds at preferred working depth.

    Integral three-point rigid models
    Working width Productivity per hour at 18.5 km/h (11.5 mph)*
    2.5 m (8 ft, 4 in.) 4.7 ha (11.6 acres)
    3.05 m (10 ft) 5.6 ha (13.9 acres)
    3.6 m (11 ft, 8 in.) 6.6 ha (16.3 acres)

     

    One-section drawn models
    Working width Productivity per hour at 18.5 km/h (11.5 mph)*
    2.5 m (8 ft, 4 in.) 4.7 ha (11.6 acres)
    3.05 m (10 ft) 5.6 ha (13.9 acres)
    3.6 m (11 ft, 8 in.) 6.6 ha (16.3 acres)

     

    Two-section drawn models
    Working width Productivity per hour at 18.5 km/h (11.5 mph)*
    4.85 m (15 ft, 11 in.) 9.0 ha (22.2 acres)
    5.4 m (17 ft, 7 in.) 9.8 ha (24.3 acres)
    6.4 m (20 ft, 11 in.) 11.8 ha (29.2 acres)
    7.4 m (24 ft, 4 in.) 13.7 ha (33.9 acres)
    Three-section drawn models
    Working width Productivity per hour at 18.5 km/h (11.5 mph)*
    7.6 m (25 ft) 14.1 ha (34.8 acres)
    9.1 m (30 ft) 16.9 ha (41.8 acres)
    10.7 m (35 ft) 19.7 ha (48.8 acres)
    12.2 m (40 ft) 22.6 ha (55.8 acres)
    13.7 m (45 ft) 25.4 ha (62.7 acres)

     

    *NOTE: Minimum overlap of 15.2 cm (6 in.).

  • Individually mounted blades Individually mounted blades
    Rubber torsion elements Rubber torsion elements

    The 2680H High-Performance Disk features individually mounted blades. These blades, supported by rubber torsion elements, can travel up to 22.9 cm (9 in.) while passing over an obstruction, like a rock. This allows the rest of the tool to remain engaged and continue working, allowing for better ground contour.

    #

    To also follow ground contour, wings on the three-section machines flex to stay engaged on hilly or terraced ground.

    Wings follow the ground contour Wings follow the ground contour

    Blades are also easy to replace. Rather than having to remove an entire gang, just replace an individual blade.

  • Cage roller Cage roller
    Spring roller Spring roller
    Rubber roller Rubber roller

    Producers can choose from three rear attachment options to match their operation. Options include a cage roller, spring roller, and rubber roller.

     

    The cage roller is the most versatile option. Choose this rear attachment if the primary application is fall tillage. It works in all soil types and conditions and has a diameter of 64.8 cm (25.5 in.).

     

    The spring roller is the most specialized. It works in light/medium soils and can provide a level seedbed with additional firming. Individually mounted tines work to prevent plugging of the roller. Avoid using it in rocky ground. It has a diameter of 62.2 cm (24.5 in.).

     

    The rubber roller is best for firming and preparing a seedbed in the spring. It works best in lighter drier soils where a firm finish and anchored residue is a primary concern. This rear attachment works in most soil types and features a hydraulically adjustable scraper. It has a diameter of 63.5 cm (25 in.).

  • Single-point depth control Single-point depth control

    With single-point depth control, depth is easy to set on the 2680H High-Performance Disk. Two easy crank adjustment handles allow operators to adjust the depth of the entire 2680H.

     

    The depth stop and valve are mounted directly to the frame and cylinder pins for precise, repeatable depth settings. Single-point depth control:

    • Provides 3-mm (0.1-in.) operating depth change per turn
    • Simple up-front location depth adjustment for the entire machine
    • Independent depth control of front and rear disks for quick and easy fore-aft leveling
  • Working width
    3.56 m
    11.67 ft

    Transport width
    3.83 m
    12.58 ft

    Transport height
    3.07 m
    10.08 ft

    Working depth
    5.1 to 15.2 cm
    2 to 6 in.

    Blade spacing
    25.4 cm
    10 in.

    Horsepower per ft
    10.4 kW or more
    14 hp or more

    Operating speed
    16.1 to 22.5 km/h
    10 to 14 mph

  • Working width
    3.56 m
    11.67 ft

    Transport width
    3.83 m
    12.58 ft

    Transport height
    3.07 m
    10.08 ft

    Gang standards

    Gang angle

    Purpose
    Primary/Secondary

    Working depth
    5.1 to 15.2 cm
    2 to 6 in.

    Weight per blade
    137 kg
    302 lb

    Blade size
    50.8 cm
    20 in.

    Blade spacing
    25.4 cm
    10 in.

    Horsepower per ft
    10.4 kW or more
    14 hp or more

    Operating speed
    16.1 to 22.5 km/h
    10 to 14 mph

    Blade concavity

    Blade thickness

  • Front blades
    14

    Rear blades
    14

    Total
    28

  • Main frame front

    Main frame rear

    1st wing front

    1st wing rear

    2nd wing front

    2nd wing rear

    Total

  • a
    a


    D
    D

Related Products