New Active Implement Guidance

AutoTrac
REQUEST A QUOTE
REQUEST A QUOTE
Key Features
  • Accurate placement of inputs
  • Increases productivity by increased AutoTrac usage in subsequent cropping passes.
  • Decrease crop damage in subsequent cropping practices
  • Higher accuracy of placement of inputs improving crop potential.


More Info

Features

Reduced operator fatigue
Reduces operator fatigueReduces operator fatigue
#

AutoTrac™ assisted steering system paired with Active Implement Guidance (AIG) allows operators to be more productive as they focus on tasks other than steering while traveling down the field.

 

When operators have to spend their entire workday manually steering a machine while watching for obstacles and checking to make sure the implement is operating as expected, they tend to get worn out.

 

Using AutoTrac and AIG together greatly reduces the strain on the operator because the system accurately guides the implement down the most optimum pass, accurately placing inputs, such as seed or fertilizer, in the field.

 

Other benefits to the operator:

  • The implement can be monitored more closely to see if parts are wearing out or failing, allowing the operator to be proactive rather than reactive.
  • A watchful eye can look for damaging obstacles in the field such as rocks, washouts, or holes caused by broken tile lines.
  • An industry exclusive to John Deere, fingertip controls allow operators to turn the implement steering mechanism manually in tight spaces.

All of these benefits result in more uptime for the equipment and an operator who is more alert throughout the day, a benefit everyone can appreciate.

Positive impact on inputs
Optimize inputs with Active Implement Guidance (AIG)Optimize inputs with Active Implement Guidance (AIG)
#

AIG helps optimize the use of inputs by increasing accuracy at the implement and facilitating seamless, repeatable passes throughout the growing season.

 

AIG can help to reduce input costs in a variety of applications. Potato producers and other specialty crop producers that make frequent passes through the field have seen the value of AIG as they precisely plant and care for their crops. Additionally, producers employing strip-till practices are better able to align their seed placement with their fertilizer placement, maximizing the uptake of their valuable nutrients.

High crop quality
Completing a field pass with Active Implement Guidance (AIG)Completing a field pass with Active Implement Guidance (AIG)
#

Maintaining the best crop quality is important in all farming operations, and is made especially difficult in cropping practices that require multiple passes through the field. Each pass during the production cycle puts the crop at risk. With AIG, producers no longer have to worry about the emerged crop, as both the tractor and implement are operating on the A-B line.

 

A risk is also minimized when seed is planted with AIG. The improved precision of seed placement provides a straighter path for subsequent passes throughout the season. Compaction and crop disturbance are also reduced as AIG achieves its precision by keeping the implement and tractor on the same guidance path.

 

At the end of the season, the results are better crop quality and improved yield, a value all producers can appreciate.

Automatically steers implement to guidance line
Active Implement Guidance (AIG) system installed on a potato planterActive Implement Guidance (AIG) system installed on a potato planter
#

Without the use of AIG, drawn implements are susceptible to implement drift caused by varying soil conditions as well as gravity in sidehill applications. John Deere AIG automatically steers the implement to the guidance line by providing GPS receiver position data to the implement steering system, reducing the adverse impact of implement drift

 

The benefits of John Deere AIG include:

  • Positive impact on inputs 
  • High crop quality 
  • Industry-exclusive fingertip controls
  • Reduced operator fatigue 
  • Flexibility of signal options with StarFire™ 3000 Receiver and StarFire 6000 Receiver


Shared Signal can also be used with AIGto improve performance and reduce the overall cost of the system.

The tractor and implement can use a combination of StarFire receivers. Use the following chart to determine the correct receiver configuration.

 

TractorImplementRecommended
StarFire 3000StarFire 3000Yes
StarFire iTCStarFire iTCYes
StarFire 3000StarFire iTCYes*
StarFire iTCStarFire 3000Yes*

John Deere Shared Signal is only available when using two StarFire 3000 Receivers

*For optimal AIG performance, the StarFire 3000 Receiver should be mounted on the implement.

Industry-exclusive fingertip controls
Manual implement control from the selective control valve (SCV)Manual implement control from the selective control valve (SCV)
#

Active Implement Guidance (AIG) requires an implement steering mechanism. This is common with any active implement supplier on the market. The method of controlling the mechanism can only be found from John Deere.

John Deere controls the implement steering device through the tractor's SCV. This industry-exclusive technology allows operators to engage and disengage AIG quickly and easily.

Operators appreciate this when turning in fields with limited headland space. Simply disengage AIG and manually straighten out the implement after a turn by feathering the SCV lever.

Many minutes are saved, even with the most experienced operators, by eliminating the process of backing up after turns to align implements. The time an operator spent getting frustrated turning large implements can now be spent enjoying planting.

The fingertip controls also provide ease when parking implements in tight places or pulling through narrow spaces.

Fingertip control is available for

  • John Deere
    • Large-Frame 7X30 and 7R Series Tractors
    • 8XXX  and 8R Series Tractors
    • 9XXX and 9R Series Tractors

Other tractors are compatible with John Deere AIG with the use of an external SCV.

External valveExternal valve
#

AIG is available for all other John Deere and non-John Deere tractors with the addition of an external SCV valve and SCV switch. Both can be ordered from a John Deere dealer. The tractor can have an open or a closed-center hydraulic system.

Shared signal improves performance and lowers investment cost for precision agriculture systems

First introduced with the StarFire™ 3000 Receiver, the StarFire 6000 continues to provide shared signal functionality when pairing two receivers with Active Implement Guidance (AIG) or Machine Sync combine harvest automation via the GreenStar™ 3 2630 Display or Generation 4 CommandCenter™ display. Shared signal allows correction signals to be communicated between a pair of receivers, which can improve relative system accuracy and reduce the initial investment required to use AIG or Machine Sync combine harvest automation.

 

Supported configurations:

  • StarFire 3000 leader to StarFire 3000 follower
  • StarFire 3000 leader to StarFire 6000 follower - new for the 17-1 software update
    • SF2 fallback is not a supported mode for this configuration and the Use SF2 if RTK Signal Lost check box should be deselected by the operator if using radio RTK or mobile RTK with StarFire 3000
  • StarFire 6000 leader to StarFire 6000 follower

Leader definition - tractor receiver for AIG, combine receiver for Machine Sync combine harvest automation

 

Follower definition - implement receiver for AIG, grain cart tractor receiver for Machine Sync combine harvest automation

 

NOTE: StarFire 6000 leader to StarFire 3000 follower is not a supported configuration.

AIG

Shared signal enables StarFire receivers to share information when paired using AIG. This allows a StarFire receiver using a lower accuracy to be used on the implement for an AIG system and take advantage of the higher accuracy used by the machine receiver. The following table describes the accuracy that can be expected from this system:

 

Machine receiver activation level

Implement receiver activation level

Overall system accuracy level

Relationship between two receivers

SF3/SF2

SF1

SF3/SF2

RTK

RTK

SF1

RTK

RTK

RTK

SF3/SF2

RTK

RTK

Machine Sync combine harvest automation

Shared signal enables StarFire receivers to share information when paired using Machine Sync combine harvest automation. This allows the two vehicle receivers to maximize system performance during harvest operations. The following table describes the accuracy that can be expected from this system:

 

Combine receiver activation level

Grain cart tractor receiver activation level

Overall system accuracy level

Relationship between two receivers

SF1

SF1

SF1

RTK

SF3/SF2

SF1

SF3/SF2

RTK

SF3/SF2

SF3/SF2

SF3/SF2

RTK

RTK

SF1

RTK

RTK

RTK

SF3/SF2

RTK

RTK

Accessories and Attachments

AutoTrac Integrated Machine Kits

AutoTrac Combine Machine Kit - 50 Series (PIN 695101 and Above) - PF90876

Machines must be GreenStar™ ready to be compatible with the AutoTrac machine kits. AutoTrac machine kits include the appropriate machine steering controller when necessary and AutoTrac-ready accessories. Display, receiver, and software to complete system sold separately.

AutoTrac Combine Machine Kit - 60 Series - PF90875

Machines must be GreenStar™ ready to be compatible with the AutoTrac machine kits. AutoTrac machine kits include the appropriate machine steering controller when necessary and AutoTrac-ready accessories. Display, receiver, and software to complete system sold separately.

AutoTrac Electrical Connector Assembly - 7020 or 7015 Models - PF90495
AutoTrac Sprayer Machine Kit - 4720 Models - PF90808
AutoTrac sprayer vehicle kit for 4720 modelsAutoTrac sprayer vehicle kit for 4720 models
AutoTrac Sprayer Machine Kit - 4920 Models (PIN 003999 and Below) - PF90811
AutoTrac Tractor King Pin Kit - 6105R, 6115R, 6125R or 6130R (IT4) Models with MFWD - BPF10616

AutoTrac field-installed kits are now available for 6105R, 6115R, 6125R, 6140R, or 6150R MFWD Tractors.

 

These field-installed kits are an integrated guidance solution for John Deere 6R MFWD Tractors and are compatible with the GreenStar™ 3 or GreenStar 2 system components.

 

These kits contain all of the required hydraulic components and harnesses for field installation.

 

GreenStar display options:

  • GreenStar 3 (GS3) 2630 and CommandCenter™ 
    • AutoTrac activation for GS3
  • GreenStar 2 (GS2) 1800
    • AutoTrac activation for GS2

StarFire™ Receiver and signal options:

  • StarFire 3000
    • SF1, SF2 activation, or RTK
AutoTrac Tractor King Pin Kit - 6140R or 6150R Models with MFWD - BPF10560

AutoTrac field-installed kits are now available for 6105R, 6115R, 6125R, 6140R, or 6150R MFWD Tractors.

 

These field-installed kits are an integrated guidance solution for John Deere 6R MFWD Tractors and are compatible with the GreenStar™ 3 or GreenStar 2 system components.

 

These kits contain all of the required hydraulic components and harnesses for field installation.

 

GreenStar display options:

  • GreenStar 3 (GS3) 2630 and CommandCenter™ 
    • AutoTrac activation for GS3
  • GreenStar 2 (GS2) 1800
    • AutoTrac activation for GS2

StarFire™ Receiver and signal options:

  • StarFire 3000
    • SF1, SF2 activation, or RTK
AutoTrac Tractor Machine Kit - 6105R, 6115R, or 6125R Models with MFWD - BPF10513

AutoTrac field-installed kits are now available for 6105R, 6115R, 6125R, 6140R, or 6150R MFWD Tractors.

 

These field-installed kits are an integrated guidance solution for John Deere 6R MFWD Tractors and are compatible with the GreenStar™ 3 or GreenStar 2 system components.

 

These kits contain all of the required hydraulic components and harnesses for field installation.

 

GreenStar display options:

  • GreenStar 3 (GS3) 2630 and CommandCenter™ 
    • AutoTrac activation for GS3
  • GreenStar 2 (GS2) 1800
    • AutoTrac activation for GS2

StarFire™ Receiver and signal options:

  • StarFire 3000
    • SF1, SF2 activation, or RTK
AutoTrac Tractor Machine Kit - 6130R (FT4), 6120R, 6110R models with MFWD - BPF10989
AutoTrac Tractor Machine Kit - 6135R model with MFWD - BPF10987
AutoTrac Tractor Machine Kit - 6140R or 6150R Models with MFWD - BPF10387

AutoTrac field-installed kits are now available for 6105R, 6115R, 6125R, 6140R, or 6150R MFWD Tractors.

 

These field-installed kits are an integrated guidance solution for John Deere 6R MFWD Tractors and are compatible with the GreenStar™ 3 or GreenStar 2 system components.

 

These kits contain all of the required hydraulic components and harnesses for field installation.

 

GreenStar display options:

  • GreenStar 3 (GS3) 2630 and CommandCenter™ 
    • AutoTrac activation for GS3
  • GreenStar 2 (GS2) 1800
    • AutoTrac activation for GS2

StarFire™ Receiver and signal options:

  • StarFire 3000
    • SF1, SF2 activation, or RTK
AutoTrac Tractor Machine Kit - 6145R, 6155R models with MFWD - BPF10985
AutoTrac Tractor Machine Kit - 6170R, 6190R or 6210R Models with MFWD - BPF10345

AutoTrac field-installed kits are now available for 6210R, 6190R, and 6170R MFWD Tractors.

These field-installed kits are an integrated guidance solution for John Deere 6R MFWD Tractors.

 

All required hydraulic components and harnesses for field installation are contained in these kits.

 

GreenStar™ display options:

  • GreenStar 3 (GS3) 2630 and CommandCenter™ 
    • AutoTrac activation for GS3
  • GreenStar 2 (GS2) 1800
    • AutoTrac activation for GS2

 

StarFire™ Receiver and signal options:

  • StarFire 3000
    • SF1, SF2 activation, or Real Time Kinematic (RTK)
AutoTrac Tractor Machine Kit - 6175R, 6195R and 6215R models with MFWD - BPF10683

The AutoTrac system reduces overlap, saving time, fuel, and labor costs. Whether breaking stubble with tillage equipment, planting or seeding, spraying or fertilizing, it reduces implement overlap by up to 90 percent. It also provides faster headland turns because the AutoTrac system takes the guesswork out of the return path.

AutoTrac Tractor Machine Kit - 6420 Models with MFWD - PF90568
AutoTrac tractor vehicle kit itemsAutoTrac tractor vehicle kit items
More AutoTrac tractor vehicle kit itemsMore AutoTrac tractor vehicle kit items
More AutoTrac tractor vehicle kit itemsMore AutoTrac tractor vehicle kit items
AutoTrac Tractor Machine Kit - 7020 or 7015 Models with MFWD - PF90496

When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™  machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.

 

Key features of the integrated AutoTrac steering kit:

  • Integration, for a clean look in the machine
  • Uses GreenStar components and AutoTrac software
  • Works with the Original, GreenStar 2, or GreenStar 3 systems
  • Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
AutoTrac Tractor Machine Kit - 7220 or 7320 Models with MFWD - PF90569
AutoTrac tractor vehicle kit itemsAutoTrac tractor vehicle kit items
More AutoTrac tractor vehicle kit itemsMore AutoTrac tractor vehicle kit items
More AutoTrac tractor vehicle kit itemsMore AutoTrac tractor vehicle kit items
AutoTrac Tractor Machine Kit - 7420 or 7520 Models with MFWD - PF90570
AutoTrac tractor vehicle kit itemsAutoTrac tractor vehicle kit items
More AutoTrac tractor vehicle kit itemsMore AutoTrac tractor vehicle kit items
AutoTrac Tractor Machine Kit - 7630, 7730, 7830 or 7930 Models with MFWD - PF90894

When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™  machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.

 

Key features of the integrated AutoTrac steering kit:

  • Integration, for a clean look in the machine
  • Uses GreenStar components and AutoTrac software
  • Works with the Original, GreenStar 2, or GreenStar 3 systems
  • Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
AutoTrac Tractor Machine Kit - 7720 or 7820 Models with MFWD and IVT Transmission - PF90891

When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™  machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.

 

Key features of the integrated AutoTrac steering kit:

  • Integration, for a clean look in the machine
  • Uses GreenStar components and AutoTrac software
  • Works with the Original, GreenStar 2, or GreenStar 3 systems
  • Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
AutoTrac Tractor Machine Kit - 7720 or 7820 Models with MFWD and PowrQuad Transmission - PF90893

When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™  machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.

 

Key features of the integrated AutoTrac steering kit:

  • Integration, for a clean look in the machine
  • Uses GreenStar components and AutoTrac software
  • Works with the Original, GreenStar 2, or GreenStar 3 systems
  • Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
AutoTrac Tractor Machine Kit - 7920 Models with MFWD and IVT Transmission - PF90892

When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™  machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.

 

Key features of the integrated AutoTrac steering kit:

  • Integration, for a clean look in the machine
  • Uses GreenStar components and AutoTrac software
  • Works with the Original, GreenStar 2, or GreenStar 3 systems
  • Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
AutoTrac Tractor Machine Kit - 8000 Series with MFWD - PF90863

When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™  machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.

 

Key features of the integrated AutoTrac steering kit:

  • Integration, for a clean look in the machine
  • Uses GreenStar components and AutoTrac software
  • Works with the Original, GreenStar 2, or GreenStar 3 systems
  • Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
AutoTrac Tractor Machine Kit - 8000T Series - PF90396
AutoTrac Tractor Machine Kit - 8010 Series with MFWD - PF90862

When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™  machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.

 

Key features of the integrated AutoTrac steering kit:

  • Integration, for a clean look in the machine
  • Uses GreenStar components and AutoTrac software
  • Works with the Original, GreenStar 2, or GreenStar 3 systems
  • Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
AutoTrac Tractor Machine Kit - 8020 Series with ILS - PF90861

When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™  machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.

 

Key features of the integrated AutoTrac steering kit:

  • Integration, for a clean look in the machine
  • Uses GreenStar components and AutoTrac software
  • Works with the Original, GreenStar 2, or GreenStar 3 systems
  • Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
AutoTrac Tractor Machine Kit - 8020 Series with MFWD - PF90497

When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™  machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.

 

Key features of the integrated AutoTrac steering kit:

  • Integration, for a clean look in the machine
  • Uses GreenStar components and AutoTrac software
  • Works with the Original, GreenStar 2, or GreenStar 3 systems
  • Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
AutoTrac Tractor Machine Kit - 8030 Series with ILS 40 km/h (PIN 005466 and Below) - PF90818

When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™  machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.

 

Key features of the integrated AutoTrac steering kit:

  • Integration, for a clean look in the machine
  • Uses GreenStar components and AutoTrac software
  • Works with the Original, GreenStar 2, or GreenStar 3 systems
  • Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
AutoTrac Tractor Machine Kit - 8030 Series with ILS 40km/h (PIN 005467 and Above) - PF90820

When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™  machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.

 

Key features of the integrated AutoTrac steering kit:

  • Integration, for a clean look in the machine
  • Uses GreenStar components and AutoTrac software
  • Works with the Original, GreenStar 2, or GreenStar 3 systems
  • Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
AutoTrac Tractor Machine Kit - 8030 Series with MFWD (PIN 005466 and Below) - PF90817

When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™  machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.

 

Key features of the integrated AutoTrac steering kit:

  • Integration, for a clean look in the machine
  • Uses GreenStar components and AutoTrac software
  • Works with the Original, GreenStar 2, or GreenStar 3 systems
  • Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
AutoTrac Tractor Machine Kit - 8030 Series with MFWD (PIN 005467 and Above) - PF90819

When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™  machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.

 

Key features of the integrated AutoTrac steering kit:

  • Integration, for a clean look in the machine
  • Uses GreenStar components and AutoTrac software
  • Works with the Original, GreenStar 2, or GreenStar 3 systems
  • Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
AutoTrac Tractor Machine Kit - 9020 Series Wheel with Steel Gudgeon (PIN 010444 and Above) or 9020 Series Wheel with Cast Gudgeon (All PINs) - PF90671

When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™  machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.

 

Key features of the integrated AutoTrac steering kit:

  • Integration, for a clean look in the machine
  • Uses GreenStar components and AutoTrac software
  • Works with the Original, GreenStar 2, or GreenStar 3 systems
  • Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
AutoTrac Tractor Machine Kit - 9030 Series Wheel Scraper Tractor - PF90849
AutoTrac Tractor Machine Kit - 9R Series Wheel Scraper Tractor - BPF10629

When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™  machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.

 

Key features of the integrated AutoTrac steering kit:

  • Integration, for a clean look in the machine
  • Uses GreenStar components and AutoTrac software
  • Works with the Original, GreenStar 2, or GreenStar 3 systems
  • Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
AutoTrac Tractor Machine Kit - 9RT Series Scraper Tractor - BPF10631

When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™  machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.

 

Key features of the integrated AutoTrac steering kit:

  • Integration, for a clean look in the machine
  • Uses GreenStar components and AutoTrac software
  • Works with the Original, GreenStar 2, or GreenStar 3 systems
  • Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
SPFH Guidance Base Kit - 7000, 7050 and 7080 Series - BZ100079
AutoTrac SPFH base kit for ProDrive transmissionsAutoTrac SPFH base kit for ProDrive transmissions
SPFH SSU Controller - 7000, 7050 and 7080 Series - BZ100196
AutoTrac SPFH controller for 7000 and 7050 SeriesAutoTrac SPFH controller for 7000 and 7050 Series

AutoTrac RowSense Kits for Mechanical Feelers

AutoTrac RowSense Mechanical Feelers (20 In. Row Spacing) - PF90699
RowSense mechanical feelers (51-cm [20-in.] row spacing)RowSense mechanical feelers (51-cm [20-in.] row spacing)
AutoTrac RowSense Mechanical Feelers (22 In. Row Spacing) - PF90700
RowSense mechanical feelers (56-cm [22-in.] row spacing)RowSense mechanical feelers (56-cm [22-in.] row spacing)
AutoTrac RowSense Mechanical Feelers (30 In. or 75 cm Row Spacing) - PF90697
AutoTrac RowSense Mechanical Feelers (45 cm Row Spacing) - Argentina and Brazil - BPF10266
AutoTrac RowSense Mechanical Feelers (70 cm Row Spacing) - PF90698
RowSense mechanical feelers (70-cm [27.6-in.] row spacing)RowSense mechanical feelers (70-cm [27.6-in.] row spacing)
AutoTrac RowSense Retrofit Kit - Corn Head - PF90757
 RowSense retrofit kit for corn head RowSense retrofit kit for corn head

AutoTrac RowSense Kits for Universal Sensor

AutoTrac RowSense Kit for Universal Sensor - Combine - PF90742
AutoTrac RowSense Universal Sensor - PF91001
Case IH Corn Head Mounting Hardware - 2200/2400/3200/3400 Series 30" - PF90844
Drago Corn Head Mounting Hardware - All Series 30" - PF90977
Geringhoff Corn Head Mounting Hardware - NorthStar or Rota Disc Series 30" - PF90978
John Deere Corn Head Mounting Hardware - 600 Series 30" and 75cm - PF90843
John Deere Corn Head Mounting Hardware - 90 Series 30" (MY1994-2001) - PF91002
John Deere Corn Head Mounting Hardware - 90 Series 30" (MY2002-2007) - PF90794

AutoTrac Universal Supplemental Kits

AutoTrac Universal Auxiliary Resume Switch - PF90453
ConnectorsConnectors
Auxiliary resume switchAuxiliary resume switch

The AutoTrac™ Universal (ATU) auxiliary resume switch enables the ATU unit to be engaged from a remote location in the cab or operator's station.

 

The switch can either be mounted directly to a rigid surface or disassembled to allow panel mounting.

 

By installing this switch, operators can engage the ATU system in a location that provides them easy access and is convenient for all their applications throughout the growing season.

 

NOTE: This attachment is orderable through the AMS Price Pages as part number PF90453.

AutoTrac Universal Guidance Harness Kit - BPF11129
AutoTrac Universal Horn Kit - PF90452
AutoTrac Universal horn kit AutoTrac Universal horn kit
AutoTrac Universal Hub and Anti-Rotation Bracket - PF90560

AutoTrac™ is an assisted hands-free steering system that automatically steers the machine through the fields. For some of the competitive sprayers, an AutoTrac Universal Hub will be required along with other attachments. For complete compatibility information, see the ATU look up tool.

AutoTrac Universal Hub, Anti-Rotation Bracket and Hardware - PF90476

AutoTrac™ is an assisted hands-free steering system that automatically steers the machine through the fields. For some of the competitive sprayers, an AutoTrac Universal Hub will be required along with other attachments. For complete compatibility information, see the ATU look up tool.

AutoTrac Universal Hub, Auto-Rotation Bracket and Horn Switch Kit - PF90565

AutoTrac™ is an assisted hands-free steering system that automatically steers the machine through the fields. For some of the competitive sprayers, an AutoTrac Universal Hub will be required along with other attachments. For complete compatibility information, see the ATU look up tool.

Device Connectivity

Ethernet Switch - BPF10746
Ethernet switchEthernet switch
#

The Ethernet switch enables connectivity for a GreenStar™ 3 (GS3) 2630 Display and a Generation 4 CommandCenter™ to the modular telematics gateway (MTG) to support MyJohnDeere applications. The Ethernet switch has five M12 Ethernet connectors and one M12 power connector.

GreenStar Brackets

Bracket - GreenStar Dual Display - PF90430
GreenStar dual display bracket GreenStar dual display bracket
Deluxe Shroud Conversion Bracket Kit - 6020 or 6030 Series or Small Frame 7000, 10, 20, or 30 Series Tractors - PF90780
Deluxe Shroud Conversion Bracket Kit - 9000 (MY1990 and Newer), 10, 50, 60 or 70 Series Combines; 7760, 9986 or 9996 Cotton Pickers or 7460 Cotton Strippers - PF91009
Deluxe Shroud Conversion Bracket Kit - Large Frame 7000/8000/9000 Model Tractors or 4700/4800/4900 Model Sprayers. For Series 00, 10, 20 or 30. - PF91010
Deluxe Shroud Conversion Bracket Kit - RTK Base Station/Tripod - PF90781
GreenStar Display Cornerpost Bracket - S-Series Combines - BPF11186
GreenStar Tractor Bracket Bundle - 6B Tractors - BPF11167
GreenStar Tractor Bracket Kit - 9020 Series - PF90409
GreenStar Tractor Bracket Kit - 9020 Wheel or 9020 Track Series - PF90199
GreenStar Tractor Harness Bundle - 6B Tractors - BPF11184
John Deere AutoTrac Controller Bracket - BPF10472
Position Receiver Bracket and Connector Kit - PF90758
Position receiver bracket and connector kitPosition receiver bracket and connector kit
StarFire Receiver Bracket Bundle - BPF11185
StarFire Receiver Bracket Kit - (MY13-MY16) 6M Tractors - BPF11274
StarFire Receiver Deluxe Shroud - PF90739
StarFire Receiver Deluxe shroudStarFire Receiver Deluxe shroud
StarFire Receiver Universal Mounting Bar Kit - BPF11356

GreenStar Implement Control Kits

Active Implement Guidance Counterbalance Valve - BPF10548
Active Implement Guidance External Valve Bracket Kit - BPF10352
Active Implement Guidance Implement Feedback Harness (4 Meter) - BPF10032
Active Implement Guidance Implement Feedback Harness Extension (9 Meter) - BPF10019
Active Implement Guidance Implement Feedback Sensor - BPF10024

Machine specific kits provide dealers with all of the hardware and harnessing to equip your 2410C or 2510H with dry applicator with AccuFlow Vortex Cooler minus:

  • EVA hose
  • Vapor hose
  • Nurse tank hose
  • GreenStar Rate Controller
Active Implement Guidance or iGrade Closed Center Valve - BPF10383
Active Implement Guidance or iGrade External SCV Switch and Harness Kit - BPF10356
Active Implement Guidance or iGrade Open Center Valve - BPF10382
Bracket Assembly - John Deere 2510 Series Applicators - PF90826
CAN Front Extension Harness (12 meter) - PF90553
Front Extension Harness (10 meter) - BPF11284
Front Extension Harness (3 meter) - BPF11285
High Current Power Extension Harness (3 meter) - PF90825
Implement Lateral Error Demo Kit - BPF11544
Implement Mast - For universal use on 3", 4", 5" or 6" Frame Tubes - PF90523
Implement Mast - For universal use on 7" or 8" Frame Tubes - PF90524
Implement Mast - John Deere CCS Planter With Refuge Plus Tank (MY2006 and Newer) - PF90549
Implement Mast - John Deere CCS Planter Without Refuge Plus Tank (MY2004 and Newer) - PF90525
Implement Receiver Harness - PF90538
John Deere Application Controller Mounting Hardware - 6R - BPF10940
John Deere Application Controller Mounting Hardware - 7R - BPF10732
John Deere Application Controller Mounting Hardware - 8000, 8010 and 8R Wheeled Series Tractors  - BPF10041
John Deere Application Controller Mounting Hardware - 8000T and 8010T Series Tractors - BPF10020
John Deere Application Controller Mounting Hardware - 8020 Wheeled Series Tractors - BPF10022
John Deere Application Controller Mounting Hardware - 8020T Series Tractors - BPF10021
John Deere Application Controller Mounting Hardware - 8RT Series Tractors - BPF10042
John Deere Application Controller Mounting Hardware - 9000 and 9020 Wheeled and Track Series - BPF10023
John Deere Application Controller Mounting Hardware - 9R with Standard Hydraulics - BPF11173
Power Extension Harness (11 meter) - PF90592
Switch and power extension harnessSwitch and power extension harness
Power Harness - 4WD Tractor - BPF10404
Power Harness - Row Crop Tractor - BPF10403
iGrade Counterbalance Valve - BPF10547
iGrade or Active Implement Guidance Implement CAN Extension Harness - BPF10018
iGrade or Surface Water Pro Receiver Mounting Kit - PF90676
Surface Water Pro receiver mounting kit Surface Water Pro receiver mounting kit

GreenStar Miscellaneous Hardware

GreenStar Lightbar - BPF10028

The GreenStar™ Lightbar is a simple, economical Parallel Tracking™ display.

 

The 27 tracking indicator light-emitting diodes (LED) tell the operator how the machine is tracking in relation to the desired guidance line.

The operator steers the vehicle back to the guidance line.
 
GreenStar Lightbar can be run as a stand-alone unit or as a companion to either an Original GreenStar Display or GreenStar 2 (GS2) 2600, GreenStar 2 1800, or GreenStar 3 2630 Display.
 
NOTE: The GreenStar Lightbar cannot be power washed.

GreenStar/Gen 4 10" Display Touch Panel Protector Service Kit - PF90596

GreenStar and Gen 4 Harnesses

GreenStar Ready Harness Kit - 6M (MY16) FT4 Cab - BPF11333
GreenStar Ready Universal Guidance Kit, Upgradeable - John Deere or Competitive Models  - BPF10139
Harness - Field Doc Connect - PF90277
Harness for Field Doc ConnectHarness for Field Doc Connect
Harness - GreenStar Lightbar 4 Pin Extension - PF90937
Harness - GreenStar Mobile Guidance Kit - John Deere or Competitive Models - BPF10302
Harness - StarFire 300 (1.8 Meter) - PF90857
Harness - StarFire Position Receiver Extension (30 cm) - BPF10200
Harness - StarFire Position Receiver Radar Adapter - PF90350

Harvest Sensor Kits

Combine Moisture Sensor Retrofit Kit - 50 Series - PF90872
Combine moisture sensor retrofit kit on 50 SeriesCombine moisture sensor retrofit kit on 50 Series
Combine Sensor Kit - 50 Series - PF90874

First introduced in 1995, Combine Yield Monitoring and Combine Yield Mapping were John Deere’s first precision farming products. It is capable of monitoring or mapping yield and moisture on many of the older John Deere combines as field-installed attachments.

 

Harvest Monitor™ and Harvest Doc™ – 9060 Series Combines

*Harvest Monitor and Harvest Doc is retrofittable to 50 Series Combines

 

Functionality includes multi-client functionality, boundary recording, and weather and field condition recording as well as compatibility to GreenStar™ guidance products.

 

Harvest Monitor enables the operator to view yield and moisture while harvesting. It consists of the following components:

  • Grain tank-mounted moisture sensor
  • Mass flow sensor
  • GreenStar display
  • Associated brackets and harnesses

Harvest Doc enables the operator to record yield and moisture with GPS and later load the information into desktop software as maps and reports. To upgrade from Harvest Monitor to Harvest Doc, the following additional components are necessary:

 

StarFire™ Receiver

  • Apex™ desktop software
  • GreenStar display
Combine Sensor Kit - 60 or 70 Series - PF90873

First introduced in 1995, Combine Yield Monitoring and Combine Yield Mapping were John Deere’s first precision farming products. It is capable of monitoring or mapping yield and moisture on many of the older John Deere combines as field-installed attachments.

 

Harvest Monitor™ and Harvest Doc™ – 9060 Series Combines

*Harvest Monitor and Harvest Doc is retrofittable to 50 Series Combines

 

Functionality includes multi-client functionality, boundary recording, and weather and field condition recording as well as compatibility to GreenStar™ guidance products.

 

Harvest Monitor enables the operator to view yield and moisture while harvesting. It consists of the following components:

  • Grain tank-mounted moisture sensor
  • Mass flow sensor
  • GreenStar display
  • Associated brackets and harnesses

Harvest Doc enables the operator to record yield and moisture with GPS and later load the information into desktop software as maps and reports. To upgrade from Harvest Monitor to Harvest Doc, the following additional components are necessary:

 

StarFire™ Receiver

  • Apex™ desktop software
  • GreenStar display
Combine Sensor Kit - 9400, 9500, or CTS Models (PIN 639999 and Below) - PF90866

First introduced in 1995, Combine Yield Monitoring and Combine Yield Mapping were John Deere’s first precision farming products. It is capable of monitoring or mapping yield and moisture on many of the older John Deere combines as field-installed attachments.

 

Harvest Monitor™ and Harvest Doc™ – 9060 Series Combines

*Harvest Monitor and Harvest Doc is retrofittable to 50 Series Combines

 

Functionality includes multi-client functionality, boundary recording, and weather and field condition recording as well as compatibility to GreenStar™ guidance products.

 

Harvest Monitor enables the operator to view yield and moisture while harvesting. It consists of the following components:

  • Grain tank-mounted moisture sensor
  • Mass flow sensor
  • GreenStar display
  • Associated brackets and harnesses

Harvest Doc enables the operator to record yield and moisture with GPS and later load the information into desktop software as maps and reports. To upgrade from Harvest Monitor to Harvest Doc, the following additional components are necessary:

 

StarFire™ Receiver

  • Apex™ desktop software
  • GreenStar display
Combine Sensor Kit - 9400, 9500, or CTS Models (PIN 640000 and Above) - PF90867

First introduced in 1995, Combine Yield Monitoring and Combine Yield Mapping were John Deere’s first precision farming products. It is capable of monitoring or mapping yield and moisture on many of the older John Deere combines as field-installed attachments.

 

Harvest Monitor™ and Harvest Doc™ – 9060 Series Combines

*Harvest Monitor and Harvest Doc is retrofittable to 50 Series Combines

 

Functionality includes multi-client functionality, boundary recording, and weather and field condition recording as well as compatibility to GreenStar™ guidance products.

 

Harvest Monitor enables the operator to view yield and moisture while harvesting. It consists of the following components:

  • Grain tank-mounted moisture sensor
  • Mass flow sensor
  • GreenStar display
  • Associated brackets and harnesses

Harvest Doc enables the operator to record yield and moisture with GPS and later load the information into desktop software as maps and reports. To upgrade from Harvest Monitor to Harvest Doc, the following additional components are necessary:

 

StarFire™ Receiver

  • Apex™ desktop software
  • GreenStar display
Combine Sensor Kit - 9410, 9510, or CTS II Models - PF90871

First introduced in 1995, Combine Yield Monitoring and Combine Yield Mapping were John Deere’s first precision farming products. It is capable of monitoring or mapping yield and moisture on many of the older John Deere combines as field-installed attachments.

 

Harvest Monitor™ and Harvest Doc™ – 9060 Series Combines

*Harvest Monitor and Harvest Doc is retrofittable to 50 Series Combines

 

Functionality includes multi-client functionality, boundary recording, and weather and field condition recording as well as compatibility to GreenStar™ guidance products.

 

Harvest Monitor enables the operator to view yield and moisture while harvesting. It consists of the following components:

  • Grain tank-mounted moisture sensor
  • Mass flow sensor
  • GreenStar display
  • Associated brackets and harnesses

Harvest Doc enables the operator to record yield and moisture with GPS and later load the information into desktop software as maps and reports. To upgrade from Harvest Monitor to Harvest Doc, the following additional components are necessary:

 

StarFire™ Receiver

  • Apex™ desktop software
  • GreenStar display
Combine Sensor Kit - 9410, 9510, or CTS II Models (PIN 675000 and Above) - PF90870

First introduced in 1995, Combine Yield Monitoring and Combine Yield Mapping were John Deere’s first precision farming products. It is capable of monitoring or mapping yield and moisture on many of the older John Deere combines as field-installed attachments.

 

Harvest Monitor™ and Harvest Doc™ – 9060 Series Combines

*Harvest Monitor and Harvest Doc is retrofittable to 50 Series Combines

 

Functionality includes multi-client functionality, boundary recording, and weather and field condition recording as well as compatibility to GreenStar™ guidance products.

 

Harvest Monitor enables the operator to view yield and moisture while harvesting. It consists of the following components:

  • Grain tank-mounted moisture sensor
  • Mass flow sensor
  • GreenStar display
  • Associated brackets and harnesses

Harvest Doc enables the operator to record yield and moisture with GPS and later load the information into desktop software as maps and reports. To upgrade from Harvest Monitor to Harvest Doc, the following additional components are necessary:

 

StarFire™ Receiver

  • Apex™ desktop software
  • GreenStar display
Combine Sensor Kit - 9600 Models (PIN 639999 and Below) - PF90864

First introduced in 1995, Combine Yield Monitoring and Combine Yield Mapping were John Deere’s first precision farming products. It is capable of monitoring or mapping yield and moisture on many of the older John Deere combines as field-installed attachments.

 

Harvest Monitor™ and Harvest Doc™ – 9060 Series Combines

*Harvest Monitor and Harvest Doc is retrofittable to 50 Series Combines

 

Functionality includes multi-client functionality, boundary recording, and weather and field condition recording as well as compatibility to GreenStar™ guidance products.

 

Harvest Monitor enables the operator to view yield and moisture while harvesting. It consists of the following components:

  • Grain tank-mounted moisture sensor
  • Mass flow sensor
  • GreenStar display
  • Associated brackets and harnesses

Harvest Doc enables the operator to record yield and moisture with GPS and later load the information into desktop software as maps and reports. To upgrade from Harvest Monitor to Harvest Doc, the following additional components are necessary:

 

StarFire™ Receiver

  • Apex™ desktop software
  • GreenStar display
Combine Sensor Kit - 9600 Models (PIN 640000 and Above) - PF90865

First introduced in 1995, Combine Yield Monitoring and Combine Yield Mapping were John Deere’s first precision farming products. It is capable of monitoring or mapping yield and moisture on many of the older John Deere combines as field-installed attachments.

 

Harvest Monitor™ and Harvest Doc™ – 9060 Series Combines

*Harvest Monitor and Harvest Doc is retrofittable to 50 Series Combines

 

Functionality includes multi-client functionality, boundary recording, and weather and field condition recording as well as compatibility to GreenStar™ guidance products.

 

Harvest Monitor enables the operator to view yield and moisture while harvesting. It consists of the following components:

  • Grain tank-mounted moisture sensor
  • Mass flow sensor
  • GreenStar display
  • Associated brackets and harnesses

Harvest Doc enables the operator to record yield and moisture with GPS and later load the information into desktop software as maps and reports. To upgrade from Harvest Monitor to Harvest Doc, the following additional components are necessary:

 

StarFire™ Receiver

  • Apex™ desktop software
  • GreenStar display
Combine Sensor Kit - 9610 Models - PF90869

First introduced in 1995, Combine Yield Monitoring and Combine Yield Mapping were John Deere’s first precision farming products. It is capable of monitoring or mapping yield and moisture on many of the older John Deere combines as field-installed attachments.

 

Harvest Monitor™ and Harvest Doc™ – 9060 Series Combines

*Harvest Monitor and Harvest Doc is retrofittable to 50 Series Combines

 

Functionality includes multi-client functionality, boundary recording, and weather and field condition recording as well as compatibility to GreenStar™ guidance products.

 

Harvest Monitor enables the operator to view yield and moisture while harvesting. It consists of the following components:

  • Grain tank-mounted moisture sensor
  • Mass flow sensor
  • GreenStar display
  • Associated brackets and harnesses

Harvest Doc enables the operator to record yield and moisture with GPS and later load the information into desktop software as maps and reports. To upgrade from Harvest Monitor to Harvest Doc, the following additional components are necessary:

 

StarFire™ Receiver

  • Apex™ desktop software
  • GreenStar display
Combine Sensor Kit - 9610 Models (PIN 675000 and Above) - PF90868

First introduced in 1995, Combine Yield Monitoring and Combine Yield Mapping were John Deere’s first precision farming products. It is capable of monitoring or mapping yield and moisture on many of the older John Deere combines as field-installed attachments.

 

Harvest Monitor™ and Harvest Doc™ – 9060 Series Combines

*Harvest Monitor and Harvest Doc is retrofittable to 50 Series Combines

 

Functionality includes multi-client functionality, boundary recording, and weather and field condition recording as well as compatibility to GreenStar™ guidance products.

 

Harvest Monitor enables the operator to view yield and moisture while harvesting. It consists of the following components:

  • Grain tank-mounted moisture sensor
  • Mass flow sensor
  • GreenStar display
  • Associated brackets and harnesses

Harvest Doc enables the operator to record yield and moisture with GPS and later load the information into desktop software as maps and reports. To upgrade from Harvest Monitor to Harvest Doc, the following additional components are necessary:

 

StarFire™ Receiver

  • Apex™ desktop software
  • GreenStar display
Cotton Stripper Harvest Doc Kit - 7460 Model - BPF10237

Today’s producers demand more and with GreenStar™ technology and John Deere delivers. With GreenStar components, customers have the ability to document and map harvest data, create prescriptions, set field boundaries and more. This translates to better management practices, better yields, and more profit.

Harvest Doc Cotton
 
The Harvest Doc Cotton yield mapping system from John Deere Ag Management Solutions (AMS) gives cotton producers the ability to see harvest data right from the cab. Using yield data collected by the machine, detailed cotton yield maps can be generated in Apex™ Farm Management software to help producers make more informed decisions.

Harvest Doc Cotton-ready machines are equipped with mass-flow sensors that monitor cotton flow through the machine’s air ducts. This information is then sent to the display in the cab for operator viewing.

 

Machine compatibility:

  • Both the 7760 and 7660 Cotton Pickers are Harvest Doc Cotton ready, straight from the factory.
  • The 7460 Cotton Stripper is available with a field-installed attachment to make it Harvest Doc Cotton ready.

 For Harvest Doc Cotton functionality, the following GreenStar components are also needed:

  • StarFire™ 3000 or StarFire™ iTC receiver
  • GreenStar 3 (GS3) 2630 or GreenStar 2 (GS2) 2600 Display
  • Data card or universal serial bus (USB) drive

NOTE: Harvest Doc Cotton-ready machines are equipped with mass-flow sensors and associated brackets, cab signal combiner module (SCM), StarFire receiver bracket, GS2/GS3 mounting bracket, and lightbar adapter harness.
 
GreenStar displays 

 

The GreenStar 3 (GS3) 2630 Display provides the operator with a number of items, including lint yield, load weight, GPS and recording status, cotton variety, area, and distance covered. All of this information can be compiled within the Harvest Doc Cotton system.

 

The GS3 2630 Display is fully compatible with both the 7760 and 7660.

 

StarFire receivers

 

StarFire receivers help producers track in-field productivity using GPS and GLONASS satellite signals.

 

In Harvest Doc Cotton, StarFire receivers' georeference yield data is captured by the mass flow sensors. This information is transferred to the cab display, which can then give operators yield data relative to field position.

 

To accommodate a wide range of accuracy needs and to offer unmatched upgradeability, the StarFire 3000 Receiver is available in different configurations: SF1 and SF2 ready.

 

Apex Farm Management software
 
In the office, Apex Farm Management software is used to generate detailed yield data.

The cotton yield map from Apex shows yield variance throughout the field. Also, printed on the map is the total number of acres harvested, harvest date, average yield, and harvest hours for the operator, farm, and field.

Cotton Yield Sensor Kit - 9986 or 9996 Models (6-Row ONLY) - PF90882
Cotton yield sensor kit for 9986 or 9996 models Cotton yield sensor kit for 9986 or 9996 models

Machine Communication Radio

Machine Communication Radio All Makes Kit - BPF10776

Machine Control

Combine Hydro Handle for Machine Sync Application - BPF10405
John Deere Machine Sync 3/4 Bin Fill Kit - 70 Series Combine (MY'08 or MY'09) - BPF10504

StarFire RTK Kits

Base Station Kit for RTK Radio 900 - BPF10838
Base Station Kit for RTK Radio 900 with Tripod - BPF10837
Hi-Gain Base Antenna - PF91105
High-gain base antennaHigh-gain base antenna
Magnetic Rover Antenna - John Deere RTK Radio 900 - PF90347
RTK Dual Radio Harness - BPF10029
RTK dual radio harnessRTK dual radio harness
RTK Radio Extension Harness - 50 Ft. - PF90450
RTK Tripod with Labels - PF90886
RTK tripod with labelsRTK tripod with labels

PF80762 - Storage case for original GreenStar™ common components

RTK Universal Base Station Bundle 450 - PF91099
RTK Universal StarFire Mounting Bracket - PF90885
RTK universal StarFire mounting bracket RTK universal StarFire mounting bracket
Repeater Kit for RTK Radio 900 - BPF10839