1023E Sub-Compact Utility Tractor

  • Powerful Final Tier 4-compliant diesel engine
  • New, easy-lift hood with dual gas-charged lift struts
  • Auto-Connect™ mid-mower deck can be installed or removed in less than 5 minutes
  • Easy-to-operate two speed hydrostatic transmission
MSRP Starting At

$12,424.00

No Ratings for 1023E Sub-Compact Utility Tractor

Be the first to leave a rating!

  • Drive-over deck makes connection simpleDrive-over deck makes connection simple

    1 Family Tractors are designed to minimize the time and effort needed to switch-out implements to accommodate different jobs.

     

    • AutoConnect Deck System: Connect a mid-mount mower deck to the tractor in less than 60 seconds without leaving the seat except to lock the gauge wheels.
      • Load-N-Go attachment: Easily move your 60D Autoconnect Deck with your John Deere Loader after it has been disconnected from the tractor with the Load-N-Go ramps.
    • Quik-Park™ Loader System: 120R Quik-Park™ Loaders are designed for easy mounting and removal in about a minute, with no tools needed.
    • Quik-Tatch™ front hitch: Save time switching front implements like a snow blower, rotary broom, or front blade without tools.
    • iMatch™ quick-hitch: Easily hookup Category 1 implements in seconds using three fixed points to back in and pick up rear implements without leaving the seat
      • Position control hitch: Set the rear hitch height and then consistently lower the hitch to the exact height every time, which is especially useful in grading and leveling applications.
    • Quik-Knect™ system: Connect power take-off (PTO)-driven implements quickly and with low physical effort. The Quik-Knect system utilizes one connector for the tractor’s PTO shaft and a designated connector for each implement which eliminates twisting and forcing splines to align.

     

    1 Family Tractors can have up to three implements mounted simultaneously due to standard dual selective control valves (SCVs), allowing you to switch from using one implement to another without stopping to adjust. When a third SCV kit is added, the number of possible combinations is greatly increased.

  • Twin Touch™ pedalsTwin Touch™ pedals

    The hydrostatic transmission’s infinite ground speeds and direction of travel are both controlled with the Twin Touch foot pedals.

    • Ideal for loader or mower applications where frequent direction and speed changes are needed
    • No clutching for fast direction changes
    • Match the job at hand with infinite ground speeds
  • Standard 4WD and power steering make 1 Family Tractors excellent for mowingStandard 4WD and power steering make 1 Family Tractors excellent for mowing

    Both 4WD and power steering are standard equipment on the 1 Family Tractors. This combination allows for excellent maneuverability and ease of operation.

    • Narrow overall width allows you to work in tight areas where most compact tractors just cannot fit. The 144.8-cm (57-in.) wheel base and 119.4 cm (47 in.) overall width gives great stability for all types of terrain.
    • Power steering means fewer turns of the steering wheel than manual steering, which is especially valuable when mowing around obstacles or during front loader work.
    • High horsepower-to-weight ratio makes the 1 Family Tractors a good choice for a variety of tasks. The overall tractor weight reduces ground compaction and makes them excellent for mowing.
    • The fully-independent power take-off (PTO) allows engaging and disengaging of the PTO without stopping tractor movement. This is important when driving across obstacles such as driveways while mowing.
  • Open operator's station (1025R shown)Open operator's station (1025R shown)

    The 1023E open operator station is designed for greater comfort and increased visibility.

     

    Comfortable operation  

    • Thick, textured rubber floor mat reduces vibrations and absorbs shock and noise
    • Step-through flat platform and fender-mounted handrails make it easy to get on and off the tractor from either side
    • Controls are conveniently located next to the fenders and are color-coded for quick identification
    • Easy-lift hood with dual gas-charged lift struts as standard equipment. A simple flip of the latch lets you open the rugged composite hood, providing wide open access to the engine compartment.
    • Foldable ROPS keeps you protected during operation and improve the ability to store tractor in a garage
    Foldable Roll-Gard ROPSFoldable Roll-Gard ROPS

    Foldable Roll-Gard™ rollover protective structure (ROPS) is standard equipment on 1023E.

    Increased visibility
    Standard (and optional) lighting shownStandard (and optional) lighting shown
    • Sloping hood design provides improved visibility especially during front loader work
    • Standard lighting equipment allows you to work from early in the morning to late at night:
      • Two front-mounted sealed-beam halogen headlights
      • Two amber-flashing warning/hazard lights mounted on the side of the ROPS with reflectors
      • Built-in tail light on one warning/hazardous light
      • Additional front- and rear-light kits are available
  • Mid-mower lift system optionsMid-mower lift system options
    Mid-mower lift system options

    Standard mechanical mower lift
     
    The standard mechanical mower lift system moves the mower in conjunction with the rear implements and comes factory-installed on 1 Family Tractors.


     
    Optional hydraulic mower lift
     
    The optional hydraulic mower lift system allows the mower to be raised and lowered independently of the rear implements. It uses the loader joystick to lift and lower the mower deck.


     
    Optional independent hydraulic mower lift
     
    The optional independent hydraulic lift system allows the mower to be raised and lowered independently of the rear and front implements. It operates using a rocker switch mounted on the tractor, located at the operator’s left knee.

     

    For more information on this mid mower lift system click here.

  • Engine power (gross)
    16.5 kW
    22.4 hp

    Power take-off (PTO) power
    10.8 kW
    14.5 hp

    Steering hydraulics
    10.8 L/min
    2.8 gpm

    Implement hydraulics
    13.2 L/min
    3.5 gpm

    Hitch type
    Limited Category 1

    Lift capacity, 24-in. behind link arms
    309 kg
    681 lb

    Standard transmission; forward/reverse
    Hydrostatic - 2 range

    Cruise control
    No

    Approximate shipping weight (open-station; cab)
    610 kg
    1345 lb

    Wheelbase
    145 cm
    57.1 in.

  • Family
    EYDXL0.99NS2
    FYDXL0.99NS2
    GYDXL0.99NS2

    Manufacturer
    Yanmar

    Engine model
    3TNM74F-NCJT

    Engine power (gross)
    16.5 kW
    22.4 hp

    Power take-off (PTO) power
    10.8 kW
    14.5 hp

    Rated engine speed
    3200 rpm

    Type
    Diesel

    Injection pump type
    Indirect Injection

    Aspiration
    Natural

    Emissions compliance
    Final Tier 4

    Cylinders/displacement
    3 / 0.993 L
    3 / 60.6 cu in.

    Number of cylinders
    Three

    Cylinder liners
    Cast-In-Block

    Bore and stroke
    74x77 mm
    2.91 x 3.03 in.

    Compression ratio
    23.5:1

    Lubrication
    Pressurized

    Cooling system
    Water pump

    Air cleaner
    Dual element

    Engine torque at rated speed
    49.2 Nm
    36.3 lb-ft

    Fuel tank capacity
    21.2 L
    5.6 U.S. gal.

  • Battery size
    500 CCA

    Alternator (12-V)
    40 amp

    Starter size
    1.2 kW
    1.6 hp

  • Type
    Indirect Injection

    Fuel consumption

    5.3 L/hr
    1.4 U.S. gal./hr

  • Standard transmission; forward/reverse
    Hydrostatic - 2 range

    Optional transmission; forward/reverse

    Left-hand reverser
    No

    Transmission gear ranges

    Final drive
    Bull Gear

    Brakes
    Wet disc (left-hand pedal)

    Steering
    Power

    Clutch, wet/dry
    N/A

    Clutch disk diameter wet clutch

    Axle capacity
    Front
    612 kg
    1349 lb
    Rear
    715 kg
    1576 lb

    Creeper
    No

    Cruise control
    No

    Differential lock
    Yes

    Drawbar maximum vertical load

  • Type
    Open Center

    Pump rated output
    Steering
    10.8 L/min
    2.8 gpm
    Implement
    13.2 L/min
    3.5 gpm
    24 L/min
    6.3 gpm

    Pump type
    Gear

    Maximum operating pressure
    2150 psi

    Draft control sensing
    Select Control

    Remote control valves available
    Two

  • Type
    Limited Category 1

    Lift capacity, 24-in. behind link arms
    309 kg
    681 lb

  • Standard
    Rear - 540 rpm
    Mid - 2100

    Optional

    Control
    Independent

    Clutch
    Wet disc

    Brake (for mid and rear PTO)
    Wet disc

    Engagement method

  • Crankcase with filter
    2.7 L
    2.9 qt

    Transmission and hydraulic system
    14 L
    3.7 qt

  • Type
    Bull Gear

    Differential lock
    Yes

  • Rollover protective structure
    Type
    Foldable
    Yes

    Platform - flat/straddle
    One-piece semi flat

    Gear shift location - console/floor
    Left Hand Side

  • Compliance
    NA

    Visibility
    NA

    Air conditioning, temperature differential
    NA

    Doors
    NA

    Noise rating
    NA

    Seat equipment
    NA

  • Wheelbase
    145 cm
    57.1 in.

    Front axle clearance
    195 mm
    7.7 in.

    Turning radius with brakes

    Turning radius without brakes
    2.25 m
    7.4 ft

    Limited slip differential
    No

    Approximate shipping weight (open-station; cab)
    610 kg
    1345 lb

  • Front
    R4 - 18x8.5-10

    Rear
    R4 - 26x12-12

    Front tread range
    91.8 cm
    36.1 in.

    Rear tread spacing
    89.5 cm

  • Toolbox
    Yes

    Tilt steering wheel

    12-V Outlet

  • a
    a


    D
    D

Related Products