913 V-Ripper

  • Adjustable standard spacing prevents side movement
  • V-pattern frame promotes leading-edge shattering
  • LaserRip™ Extreme points
  • Heavy-duty steel ripper points
  • 913 V-Ripper 913 V-Ripper
    #

    The frame design of the 913 V-Ripper positions the standards in a V pattern:

    • Promotes leading-edge shattering of the center shank and material flow through the machine

    The 127-mm x 178-mm (5-in. x 7-in.) cross-section frame has 10-mm (3/8-in.) thick walls:

    • Provides strength to handle tractors of up to 150 power take-off (PTO) horsepower
    • Same frame-size tubing as non-expandable 915 V-Ripper
    • Parking stands are included in base equipment
  • Low and high positions on 3-point mast Low and high positions on 3-point mast
    #

    3-point hitch hookup is for Category 2 or 3N tractors.

     

    The integral hitch can be set to two positions:

    • 1 = Low position
      Gives maximum transport clearance and allows ripping to approximately 508 mm (20 in.) deep with the 838-mm (33-in.) standards.
    • 2 = High position
      Enables ripping to a maximum depth of 584 mm (23 in.) deep with the 838-mm (33-in.) standards.
  • Soil probe Soil probe
    #

    The soil probe helps operators to determine the proper operating depth of their ripper points,
    38 mm (1.5 in.) below the bottom of the compaction layer.

    The probe allows obtaining the maximum amount of soil fracturing from the entire family of John Deere ripper points. Marked in 51-mm (2-in.) increments from 254 mm to 559 mm (10 in. to 22 in.), the probe provides accurate feedback of compaction layer depth.

     

    It is stored on the mainframe of the ripper for convenient access. The operator's manual explains the proper use of the soil probe.

  • Working width
    Option 1: 2.5 m
    8.33 ft
    Option 2: 3.2 m
    10.42 ft
    Option 3: 3.8 m
    12.5 ft

    Transport width
    Option 1: 2.1 m
    7 ft
    Option 2: 2.1 m
    Option 3: 2.1 m

    Operating depth
    Maximum
    58.4 cm
    23 in.

    Miles per hour

    Horsepower per standard

    Spacings
    50.8 cm
    20 in.
    63.5 cm
    25 in.
    76.2 cm
    30 in.

  • Type
    V-ripper

    Option 1
    Standard: 3, spacing: 50.8 cm
    20 in.

    Option 2
    Standard: 3, spacing: 63.5 cm
    25 in.

    Option 3
    Standard: 3, spacing: 76.2 cm
    30 in.

    Option 4

    Option 5

    Option 6

    Option 7

    Option 8

    Option 9

    Option 10

    Option 11

    Option 12

    Option 13

    Option 14

    Option 15

    Option 16

    Option 17

    Option 18

    Option 19

    Option 20

    Option 21

    Option 22

  • Option 1
    2.5 m
    8.33 ft

    Option 2
    3.2 m
    10.42 ft

    Option 3
    3.8 m
    12.5 ft

    Option 4

    Option 5

    Option 6

    Option 7

    Option 8

    Option 9

    Option 10

    Option 11

    Option 12

    Option 13

    Option 14

    Option 15

    Option 16

    Option 17

    Option 18

    Option 19

    Option 20

    Option 21

    Option 22

  • Option 1
    2.1 m
    7 ft

    Option 2
    2.1 m
    7 ft

    Option 3
    2.1 m
    7 ft

    Option 4

    Option 5

    Option 6

    Option 7

    Option 8

    Option 9

    Option 10

    Option 11

    Option 12

    Option 13

    Option 14

    Option 15

    Option 16

    Option 17

    Option 18

    Option 19

    Option 20

    Option 21

    Option 22

  • o
    o

    5
    5

    M
    M

  • Size

    Maximum underframe clearance

  • o
    o


    M
    M

  • h
    h


    H
    H

  • Option 1
    Intergral units are controlled by tractor, rockshaft, and gauge wheels

    Option 2

    Option 3

  • Option 1

    Option 2

  • Options
    Integral

    Three-point hitch requirements
    Category 2 or 3N with Quik Coupler
    Category 3N without Quik Coupler

    Pull-type description

  • Spacings
    50.8 cm
    20 in.
    63.5 cm
    25 in.
    76.2 cm
    30 in.

    Option 1
    Trip force
    5,443 kg
    12,000 lb
    Standard type
    Straight or parabolic with wear shin
    Shear-bolt

    Option 2
    Trip force
    2,540 kg
    5,600 lb
    Standard type
    Straight with wear shin or parabolic
    Safety-trip

    Option 3
    Trip force
    2,404 kg
    5,300 lb
    Standard type
    Straight with wear shin or parabolic
    Cushion-trip

    Option 4
    Trip force
    1,451.5 to 2,404 kg
    3,200 to 5,300 lb
    Standard type
    Parabolic
    Spring-reset rock standard

  • Description

    Type

    Pounds of force

    Blades

  • Description

    Down force

    Size

    Spacing

    Angle adjustments

  • Type

    Wheels

    Tires

  • Description

    Additional feature

    Option 1

    Option 2

    Option 3

    Option 4

  • a
    a


    D
    D

  • g
    g


    O
    O

Related Products