2100 Minimum Till Ripper

  • Variety of working widths available
  • Mainframe extensions
  • Setback brackets for staggered standard pattern
  • 3/4-in. straight shear-bolt standard minimizes soil and residue disturbance
  • 19-mm (0.75-in.) ripper standard19-mm (0.75-in.) ripper standard
    #

    The 19-mm (0.75-in.) straight shear-bolt standard design moves through the soil minimizing soil and residue disturbance at the soil surface.

    • Equipped with replaceable wear shins to control wear on the leading edge of the shank that greatly extends the life of the standard, unlike some of the competitive models
    • Can only be equipped with 64-mm, 178-mm, or 254-mm (2.5-in., 7-in., or 10-in.) min-till ripper points

    The 19-mm (0.75-in.) straight standard is base equipment. It is also available as an attachment for field conversion.

  • The 2100 Minimum-Till Ripper is available in working widths from 2.29 m to 6.86 m
    (7 ft, 6 in. to 22 ft, 6 in.).

     

    Working width

    Number
    of standards

    Spacing

    2.29 m (7 ft, 6 in.)

    3

    762 mm (30 in.)

    2.74 m (9 ft)

    3

    914 mm (36 in.)

    3.05 m (10 ft)

    4

    762 mm (30 in.)

    3.81 m (12 ft, 6 in.)

    5

    762 mm (30 in.)

    4.57 m (15 ft)

    5

    914 mm (36 in.)

    5.33 m (17 ft, 6 in.)

    7

    762 mm (30 in.)

    6.86 m (22 ft, 6 in.)

    9

    762 mm (30 in.)

    6.86 m (22 ft, 6 in.) fold

    9

    762 mm (30 in.)

     

  • Frame on seven-standard modelFrame on seven-standard model
    #

    The frame is constructed with a 102-mm x 152-mm x 10-mm (4-in. x 6-in. x 0.375-in.) cross tube on three-, four-, five-, and seven-standard machines and 152-mm x 152-mm x 10-mm (6-in. x 6-in. x 0.375-in.) cross tube on nine-standard models where the hitch-mounting components are welded for maximum strength.

     

    Truss tubes connect the cross tubes and are constructed with 127-mm x 127-mm x 13-mm (5-in. x 5-in. x 0.5-in.) steel tubing.

     

    Welded together into one assembly, the frame is designed to handle the most severe operating conditions.

     

    The mainframe is 4.06-m (160-in.) wide and is the same whether there are five shanks on 762-mm (30-in.) spacings. Frame extensions make this task possible and make configurations easier to adjust.

  • Nine-standard drawn hitchNine-standard drawn hitch
    #

    A drawn hitch option is available for those who want to use large row-crop tractors or 4WD tractors without a 3-point hitch.

    The drawn hitch is only compatible with seven-standard and nine-standard 762-mm (30-in.) models. The drawn hitch is also available as an attachment for field conversion.

    The transport wheels are placed in front of the front rank of the mainframe. This allows residue to flow freely and keeps the wheels close to the standards to allow the ripper to follow the ground contour.

    The wheel modules are mounted to the front, rear, and end frame of the ripper, making it the most stable wheel package in the in-line ripper market. The tires are placed directly in front of the ripper standards so the shanks can remove the tire track in order to leave as level a profile as possible.

    There is no need for stabilizer wheels with the drawn hitch. The wheels are located within 762-mm (30 in.) of the outside edge of the machine to provide stability in both field and transport conditions.

    The nine-standard model has eight-bolt hubs and spindles with beefy 12.5L-15 tires. The seven-standard model uses 11L-15 tires. The large tires provide excellent field flotation and transport stability.

    A pressure-compensating flow divider is the heart of the depth control system. Temporary adjustments can be made while maintaining the ability to raise and lower evenly.

    The machine does not need to be fully raised at the end of a pass to keep the cylinders in phase, and cylinder stops are used to set the overall operating depth.

    NOTE: The drawn hitch attachment is only compatible with serial number 1300 or newer machines.

    Seven-standard drawn hitch foldedSeven-standard drawn hitch folded
  • Closing wheelClosing wheel
    #

    Closing wheels can be added to the rear of the 2100 Minimum-Till Ripper with 19-mm (0.75-in.) standards.

    Closing wheels offer the following benefits:

    • Minimize surface disturbance created by the standard
    • Provide more adjustments to match farming practices and varying soil conditions than competitive models
    • 114 kg (250 lb) of down pressure
    • Mounted close to the shank, allowing a high trip clearance for operation through washouts, etc.
    • Mounted with an L-bracket, allowing better soil and residue flow
  • Straight blade shownStraight blade shown

    Cushion coulters cut and size residue and pre-slice the soil to allow a more level soil profile:

    • 559-mm x 5-mm (22-in. x 0.177-in.) straight blade is in base equipment and allows the least amount of soil and residue disturbance.
    • 559-mm x 5-mm (22-in. x 0.177-in.) rippled blade is optional equipment for use when increased soil movement is desired.
  • Adjustable stabilizer wheelsAdjustable stabilizer wheels
    #

    Two adjustable 521-mm x 203-mm (20.5-in. x 8-in.) stabilizer wheels are included in base equipment to ensure straight travel and provide support on three-, four-, five-, and seven-standard sizes. The nine-standard size has four stabilizer wheels.

     

    The stabilizer wheels are designed to stabilize the unit and are not intended to be used as depth gauge wheels. The weight of the unit must be carried on the tractor.

    Additional stabilizer wheels and tires can be added if field conditions warrant more support.

  • Working width
    2.3 m 7.5 ft
    2.7 m 9 ft
    3.05 m 10 ft
    3.8 m 12.5 ft
    4.6 m 15 ft
    5.3 m 17.5 ft
    6.8 m 22.5 ft

    Transport width
    3.05 m 10 ft
    4.1 m 13.5 ft
    5 m 16.5 ft
    6.7 m 22 ft
    4.7 m 15.5 ft

    Operating depth
    Maximum
    40.6 cm
    16 in.

    Miles per hour
    6.4-8 km/h
    4-5 mph

    Horsepower per standard
    22.3-29.8 kW
    30-40 hp
    Depending on soil type, moisture, and depth of operation
    NOTE: Maximum compatible tractor engine - 231.2 kW
    310 hp

    Spacings
    76.2 cm
    30 in.
    91.4 cm
    36 in.

  • Type
    In-line ripper

    Option 1
    Standard: 3, spacing: 76.2 cm
    30 in.

    Option 2
    Standard: 3, spacing: 91.4 cm
    36 in.

    Option 3
    Standard: 4, spacing: 76.2 cm
    30 in.

    Option 4
    Standard: 5, spacing: 76.2 cm
    30 in.

    Option 5
    Standard: 5, spacing: 91.4 cm
    36 in.

    Option 6
    Standard: 7, spacing: 76.2 cm
    30 in.

    Option 7
    Standard: 9, spacing: 76.2 cm
    30 in.
    Rigid

    Option 8
    Standard: 9, spacing: 76.2 cm
    30 in.
    Folding

    Option 9

    Option 10

    Option 11

    Option 12

    Option 13

    Option 14

    Option 15

    Option 16

    Option 17

    Option 18

    Option 19

    Option 20

    Option 21

    Option 22

  • Option 1
    2.3 m
    7.5 ft

    Option 2
    2.7 m
    9 ft

    Option 3
    3.05 m
    10 ft

    Option 4
    3.8 m
    12.5 ft

    Option 5
    4.6 m
    15 ft

    Option 6
    5.3 m
    17.5 ft

    Option 7
    6.8 m
    22.5 ft

    Option 8
    6.8 m
    22.5 ft

    Option 9

    Option 10

    Option 11

    Option 12

    Option 13

    Option 14

    Option 15

    Option 16

    Option 17

    Option 18

    Option 19

    Option 20

    Option 21

    Option 22

  • Option 1
    3.05 m
    10 ft

    Option 2
    3.05 m
    10 ft

    Option 3
    3.05 m
    10 ft

    Option 4
    4.1 m
    13.5 ft

    Option 5
    4.1 m
    13.5 ft

    Option 6
    5 m
    16.5 ft

    Option 7
    6.7 m
    22 ft

    Option 8
    4.7 m
    15.5 ft

    Option 9

    Option 10

    Option 11

    Option 12

    Option 13

    Option 14

    Option 15

    Option 16

    Option 17

    Option 18

    Option 19

    Option 20

    Option 21

    Option 22

  • o
    o

    4
    4

    M
    M

  • Size
    102x152x0.9.5 mm
    4x6x0.375 in.
    9 standard: 152x152x9.5 mm
    6x6x0.35 in.

    Maximum underframe clearance
    89 cm
    35 in.

  • o
    o

    6
    6

    M
    M

  • h
    h

    2
    2

    H
    H

  • Option 1
    3-point hitch for integral

    Option 2
    Single point for pull-type

    Option 3

  • Option 1
    Pull type: 1 SCV (lift) at 17,237 kPa
    2500 psi
    for optimum raise times

    Option 2
    Low transport: 1 SCV (fold) at 17,237 kPa
    2,500 psi
    for optimum raise times

  • Options
    Integral, or 7- or 9-standard pull type

    Three-point hitch requirements
    Category 2, Category 3 and 3N (with Quik-Coupler)

    Pull-type description
    Level Lift

  • Spacings
    76.2 cm
    30 in.
    91.4 cm
    36 in.

    Option 1
    Trip force
    Shear bolt: 3,265.9 kg
    7,200 lb
    Standard type
    19 mm
    0.75 in.
    or 31.75 mm
    1.25 in.
    Straight with wear shin
    Shear-bolt

    Option 2
    Trip force
    1,451.5 kg
    3,200 lb
    Trip height
    30.5 cm
    12 in.
    Standard type
    19 mm
    0.75 in.
    Cushion trip

    Option 3


    Option 4


  • g
    g

    S
    S

    O
    O

  • Description

    Type
    Spring cushion coulters

    Pounds of force
    Normal working load: 272.2 kg
    600 lb
    Deflection of: 10.2 cm
    4 in.
    Maximum trip load: 362.9 kg
    800 lb
    Deflection of: 20.3 cm
    8 in.

    Blades
    Straight or rippled: 559x4.5 mm
    22x0.177 in.

  • Description
    Two adjustable wheels on 3-, 4-, 5- and 7-standard sizes. Four adjustable wheels on 9-standard integral only. Drawn hitch machines do not require stabilizer wheels.

    Down force
    113.4 kg
    250 lb

    Size
    10.2x40.6 cm
    4x16 in.

    Spacing
    19.05 to 35.6 cm
    7.5 to 14 in.

    Angle adjustments
    0 to 15 degree (angle)

  • Type
    Stabilizer wheels

    Wheels
    52.1x20.3 cm
    20.5x8 in.

    Tires
    10 PR

  • Description
    12.5L-15 tires for 9-standard pull-type; 11L-15 tires for 7-standard, pull-type; 9-standard has 8-bolt hubs and spindles

    Additional feature
    Replaceable wear shin

    Option 1
    Set back brackets

    Option 2

    Option 3

    Option 4

  • a
    a


    D
    D

Related Products