S240 Lawn Tractor

  • Two side-by-side forward and reverse pedals
  • Wide, welcoming operator station
  • Cool and comfortable 15-in (38 cm) open, high-back seat
  • Powerful V-Twin Engine
  • Tested and proven 42-in. (106.7-cm) Edge Cutting System
MSRP Starting At

$2,599.00

No Ratings for S240 Lawn Tractor

Be the first to leave a rating!

  • 18.5-hp (13.8-kW) engine18.5-hp (13.8-kW) engine
    Engine oil and fuel filtersEngine oil and fuel filters

    The S240 Tractor comes with a premium engine, the same as used in some Select Series™ X300 models:

    • Large cleanout ports, integrated into the engine shroud, are located over the cylinder heads to allow for easy inspection and removal of any debris that may have collected there.
    • Premium engine oil and air filtering systems and cooling design provide increased reliability and engine life.

    The 18.5-hp (13.8-kW) V-twin engine provides plenty of power and torque to handle tough mulching, mowing, and bagging conditions:

    • V-twin cylinder design for greater torque, lower vibration, and improved sound quality
    • Electronic ignition for fast starts
    • Cast-iron cylinder liners for longer engine life
    • Overhead valves for excellent power and fuel economy
    • Full-pressure lubrication and oil filter for cleaner oil, prolonging engine life and extending the time between oil changes
      • Also more effective when operating the tractor on an incline
    • In-line fuel filter for reliable operation
    Engine speed lever and spring-loaded choke leverEngine speed lever and spring-loaded choke lever
    Engine hood in open positionEngine hood in open position

    The engine speed lever and choke control lever are separate controls:

    • The engine speed lever is easy to use - there is no need to worry about pushing too far and engaging the choke as on single throttle/choke lever systems.
    • The choke lever is spring loaded so the operator cannot accidentally operate the tractor with the choke on.

     Engine hood opens wide for easy access to service points:

    • It is easy to inspect and clean the engine area.
    • Important service points are exposed.
    • Cleanout ports designed into the engine shroud make cleaning the engine cooling fins easy.
    • The high-quality engine used in the S240 does not require an 8-hour oil and filter change because improvements in the manufacturing process and quality of parts, components, and oils have eliminated the need for the short interval oil change requirement.
    Fuel tank has gauge to show fuel level from the operator's seat
    Fuel tank gaugeFuel tank gauge
    Convenient fuel-filler openingConvenient fuel-filler opening

    The fuel tank gauge shows how much fuel is in the tank, and can be seen without leaving the operator's seat:

    • Easy to check the fuel level
    • Convenient location

    Fuel tank:

    • Capacity is 2.4 U.S. gal. (9.08 L).
    • Fuel-filler opening is conveniently located under the seat. 
      • Filling the tank without spilling is easy.
      • The tethered fuel tank cap is more convenient.
      • The sealed fuel cap helps keep vapors inside the tank.
      • The tractor has a California Air Resources Board (CARB) certified engine for reduced air pollution.
  • 42-in. (107-cm) Edge cutting system42-in. (107-cm) Edge cutting system
    42-in. (107-cm) Edge cutting system blades42-in. (107-cm) Edge cutting system blades

    The Edge cutting system has been trademarked to emphasize the advantages of the John Deere mower deck designs. They give superior convenience, performance, and reliability:

    • The deep-deck mower design lifts grass for a clean, even cut.
    • The smooth underside of mower prevents grass buildup and evenly disperses grass clippings.
    • The rolled outer edge of the deck provides extra strength and protection.
    • Dual-stage E-coat and powder paint coatings provide extra protection from rust.

    S240 Tractor's mower deck features a number of durability upgrades compared to comparable John Deere 100 Series and competitive mower decks:

    • Premium spindles (same as used on comparable Select Series™ decks)
    • Larger anti-scalp wheels
    • Upgraded fixed idler sheave bearing (increases life in dirty conditions)
    • Upgraded spindle sheaves (same as used on 100 Series 54-in [137-cm] decks)
    • Upgraded power take-off (PTO) drive sheave (improves belt life at lower heights of cut)

    The 42-in. (107-cm) mower deck is a two-spindle design with heavy-duty characteristics:

    • Two adjustable mower wheels are standard equipment for a smooth mowing job, even in rolling terrain.
    • The flexible discharge chute minimizes property and mower deck damage.
    • No tools are required to go from mulching (with mulch cover) to side discharge to rear bagging.
    • A mulch cover is an optional attachment.
    • A high-performance mulching blade is available to enhance mulching performance.

    The mower deck has a rolled lip to provide greater strength and protection. The rugged 13 gauge, 0.09-in. (2.3-mm) steel-deck mower will provide years of dependable mowing.

    The strength of the deck is enhanced by the top-discharge design:

    • A section of material below the discharge opening ties the front and rear of the deck together.
    • When using the rear bagger, material flows upward through the deck to provide highly effective bagging and a reduced chance of plugging.
      • For this reason, no Power Flow™ collection system is available for the 42-in. (107-cm) mower.
    Mower wash port
    Mower wash portMower wash port
    Mower wash port with hose connectorMower wash port with hose connector

    A wash port is provided to make cleaning the underside of the mower deck easy:

    • A hose connector is included with mower deck.
    StarLock™ blade design
    StarLock blade designStarLock blade design

    The StarLock blade design keeps the blade bolt at the correct torque for easy removal.

    Optional blades for difficult mulching or bagging conditions are available.

    Mower deck height adjustment
    Mower deck height adjustment leverMower deck height adjustment lever

    The spring-assisted, low-effort lift lever simplifies setting and adjusting the mower cut height:

    • Increments of 1/4 in. (6.4 mm) allow the operator to fine-tune the cut height.
    Optional mulching attachment or mulch cover
    Mulching attachmentMulching attachment
    #

    The mulching attachment for the 42-in. (107-cm) mower provides excellent performance:

    • Controls clippings from both blades effectively
    • Improves mulching
    • More even distribution of mulched clippings
    • No rusting due to use of plastic molded parts
    • Can be installed and removed without tools
    • Includes special mulching blades
    • Can also be used for side discharging, though the overall cut quality may decline slightly
    42-in. (107-cm) mulch cover42-in. (107-cm) mulch cover

    The mulch cover is available as an option for mulching grass or leaves. It is more convenient, but it provides a lower performance level than the mulching attachment.

    Optional rear grass bagger
    6.5-bu (229-L) rear bagger6.5-bu (229-L) rear bagger
    6.5-bu (229-L) rear bagger6.5-bu (229-L) rear bagger

    The hopper design provides efficient bagging performance, clean operation, and easy-to-empty bags:

    • Two durable bags with a generous, 6.5-bu (229-L) capacity lift out for emptying and are easy to reinstall.
    • An efficient lower chute provides smooth flow of material to reduce chance of plugging.
    • Standard mower blades can be used for bagging, and high-lift blades are available for very difficult bagging conditions.
  • An exclusive 3-year or 200-hour (whichever comes first), single-source, bumper-to-bumper warranty* is standard for all John Deere S200 Series Tractors.

    • The warranty is hassle free, with one company handling all of the paperwork.
    • Premium features of S200 Series Tractors allow for this longer warranty period, with more coverage than comparable tractors.

    *Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.

  • Two-pedal foot control and cruise leverTwo-pedal foot control and cruise lever
    Hydro/automatic foot control in useHydro/automatic foot control in use

    A Kanzaki® Tuff Torq® hydro/automatic transmission gives an infinite choice of speeds and makes changing the direction of travel easy.

    Side-by-side foot pedals control the speed and direction of travel:

    • The automotive-type accelerator controls ensure easy operation.
    • The operator can change direction without lifting foot off the platform.
    • A large pedal surface gives superior operator comfort.
    Hydro/automatic-transmissionHydro/automatic-transmission

    Appropriate transmissions are used in each model, depending on rear tire size and tractor performance requirements to ensure excellent performance and reliability:

    • The S240 Tractor has a Tuff Torq K46DP transaxle with an internal wet-disk brake for reliability and long life:
      • Rated for 30 percent more torque than the transaxle used in many lawn tractors
      • Uses Hy-Gard™ fluid like Select Series™ X300 Tractors
    Standard cruise control
    Cruise control leverCruise control lever

    Easy-to-use cruise control option maintains the tractor's speed for mowing larger areas.

    • To engage, lift up on the cruise lever and hold it until foot is removed from the forward pedal.
    • To disengage, lightly press and then release the forward pedal.
    • For emergency stops, cruise can be released by pushing on the brake pedal or pushing down on the cruise control lever.

    Kanzaki and Tuff Torq are trademarks of Kanzaki Kokyukoki Manufacturing Company.

  • Snow blower, weather enclosure, weights, and chains on a 100 Series TractorSnow blower, weather enclosure, weights, and chains on a 100 Series Tractor
    Front blade, weather enclosure, and chains on a 100 Series TractorFront blade, weather enclosure, and chains on a 100 Series Tractor

    An advantage of lawn tractors is their ability to use equipment for snow removal. Lawn tractor owners can add a John Deere snow blower or front blade to make quick work of moving snow whenever the need arises. Weather enclosure and tire-chain attachments add comfort and performance.

    Equipment available for snow removal includes:

    • 44-in. (112-cm) Snow Blower
    • 46-in. (117-cm) Front Blade
    • Tire chains or TerraGrip traction belts
    • Weather enclosure
    • Weights

     

  • S240 TractorS240 Tractor
    Solid, one-piece frame and cast-iron front axleSolid, one-piece frame and cast-iron front axle

    Enhanced styling for the S240 Tractor includes a unique hood top:

    • Close-out panels at the lower back of the hood are included for better looks and reduced engine sound level.
    • Top louvers improve engine cooling.

    The solid one-piece frame is constructed of 12-gauge, 0.105-in. (2.7-mm) steel:

    • Full-length robotically welded frame design has high-strength steel rails for added strength and long life.
    • One-piece fender deck is bolted to the frame.
    • Two-bar front bumper is included as standard equipment to add style and protection.
    S240 TractorS240 Tractor
    Turf Trac tire treadTurf Trac tire tread

    The S240 comes with premium Turf Trac tires for superior traction and appearance:

    • A more rounded profile reduces lawn scuffing and steering effort.
    Cast-iron front axle will not bend
    Front axle and wheel spindleFront axle and wheel spindle

    The front axle is constructed of solid cast iron that will not bend:

    • Automotive-like steering system with sector-and-pinion steering gears and single drag link and tie rod provides a very strong, low-effort, and tight-turning system.
    • Grease fittings allow regular lubrication to help maintain easy steering and minimize wear.
    • Large, 0.75-in. (19-mm) diameter wheel spindles provide excellent durability.
      • Front wheels turn on ball bearings for increased reliability and life over other lawn tractors that have bushing for the front wheels.
    CargO Mount™ system makes installation of rear bagger and other attachments easy
    Rear CargO Mount pointsRear CargO Mount points
    Front CargO Mount pointsFront CargO Mount points
    Rear bagger is mounted with the rear CargO Mount pointsRear bagger is mounted with the rear CargO Mount points

    The CargO Mount system is a combination of front and rear mounting points that provide convenient and easy installation of the rear bagger and other attachments.

  • Large, comfortable footrests
    S240 with Accel Deep MowerS240 with Accel Deep Mower
    Comfortable operator station, left sideComfortable operator station, left side

    Wide footrest areas with non-slip, anti-vibration rubber footpads are provided for operator comfort and safety:

    • Channels in the footrest design steer debris off to the side to keep the foot platform cleaner.
    • Wider footrest makes it easier to step over the mower deck while entering or exiting the seat.
    Comfortable seat
    Open-back seatOpen-back seat
    Easy-to-adjust seatEasy-to-adjust seat

    The operator seat can be easily adjusted forward or rearward while in the seat, with seat travel of 5.5 in. (140 mm) and 10 different positions:

    • The open-back seat design keeps the operators back cooler.
    • The green plastic seat adjustment lever is easy to locate and use.
    • Slide pads on the bottom of the seat allow the seat to slide more easily for convenient adjustment.
    Rubber isolators under the seat give a smoother rideRubber isolators under the seat give a smoother ride

    The seat can be tilted forward for protection from the elements and to provide easy access to the fuel tank:

    • Rubber isolators under the seat smooth out the ride for greater operator comfort.
    Convenient storage and service-interval decal
    Storage compartment with coverStorage compartment with cover
    Convenient service-interval decalConvenient service-interval decal

    The beverage holder and storage compartment, located on the right fender, add value and operator convenience.

    A decal located inside the hood gives quick access to basic service information.

  • Controls and instruments
    Conveniently located controlsConveniently located controls

    Three-spoke steering wheel for greater operator comfort and control:

    • Large, 14-in. (35.6-cm) diameter steering wheel gives greater comfort and control compared to smaller diameter steering wheels used on many lawn tractors.

    The contoured dash has clean, attractive styling:

    • Controls are color coded and labeled for easy identification by the operator.
    • Controls are logically placed and easy to reach.
    • The hour meter makes it easy to tell when oil changes and other maintenance should be performed.
    • The ignition switch is on the dash for starting ease.
    • Functional design of the controls provides good appearance and a comfortable feel.
    Engine speed lever and spring-loaded choke leverEngine speed lever and spring-loaded choke lever
    Power take-off (PTO) switchPower take-off (PTO) switch

     The engine speed lever and choke control lever are separate controls:

    • The engine speed lever is easy to use - there is no need to worry about pushing too far and engaging the choke as on single throttle/choke lever systems.
    • The choke lever is spring loaded so the operator cannot accidentally operate the tractor with the choke on.

    Mower drive is actuated with an easy-to-use electric PTO switch:

    • The electric switch requires only a short movement compared to long throw required with manual PTO engagement lever.
    • With an electric PTO clutch, the mower drive belt stays under tension at all times for improved reliability compared to manual PTO engagement systems.
    Reverse implement option (RIO)
    RIO switchRIO switch
    Using RIO

    CAUTION: Children or bystanders may be injured by rotating blades. Before traveling forward or rearward:

    • Carefully check the area around the machine.
    • Disengage the mower before backing up.

    NOTE: Backing up while the mower is engaged is strongly discouraged. RIO should be used only when operating another attachment or when the operator deems it necessary to reposition the machine with the mower engaged.

    1. Stop forward travel.
    2. Look behind the machine to be sure there are no bystanders.
    3. Push and hold in the RIO switch while depressing the reverse pedal slightly.

    NOTE: If the mower or other attachment stops while repositioning the machine, return the attachment engagement switch to the off position. Start engine and engage mower. Begin again with step 2. 

    1. Release the RIO switch and reposition the machine as the machine begins to move rearward.
    2. Resume forward travel. The mower or other attachment should continue operating.
    3. Repeat procedure to position the machine again.
    Cruise control
    Cruise control leverCruise control lever
    Cruise control lever and two-pedal foot controlCruise control lever and two-pedal foot control

    Cruise control is standard equipment:

    • To engage, lift up on the cruise lever and hold until the foot is removed from the forward pedal.
    • For emergency stop, the cruise control can be released by pushing on the brake pedal or the forward pedal.
    Parking brake control
    Parking brake controlParking brake control
    Brake pedal and parking brake controlBrake pedal and parking brake control

    The parking brake control is conveniently located for easy access. It holds the brake pedal securely in the locked position.

    Mower deck height adjustment and handgrip
    Mower deck height adjustment leverMower deck height adjustment lever
    Fender flare with handgripFender flare with handgrip

    The spring-assisted, low-effort lift lever simplifies setting and adjusting the mower cut height:

    • Increments of 0.25 in. (0.64 cm) allow for fine-tuning the cut height.

    Full-size fender flares include handgrips and reflectors for added safety.

  • One-piece hood is easy to openOne-piece hood is easy to open
    Service interval decal located under hoodService interval decal located under hood

    The one-piece hood opens easily to permit checking and servicing the engine:

    • Important service points are located within easy reach.
    • A service interval decal is provided inside the tractor hood for convenience when servicing the tractor.
      • The high-quality engine used in the S240 does not require an 8-hour oil and filter change because improvements in the manufacturing process and quality of parts, components, and oils have eliminated the need for the short interval oil change requirement.
    Easy-to-service engine fuel and oil filtersEasy-to-service engine fuel and oil filters
    Easy access to fuel-fill openingEasy access to fuel-fill opening

    The engine fuel and oil filters, the oil check/fill tube, and the oil drain tube are exposed for serviceability when the hood is opened.

    The seat tilts up and out of the way to make adding fuel easy.

    The S240 Tractor is covered by a 3-year/200-hour bumper-to-bumper warranty*:

    • Premium features of the S240 allow for this longer warranty period, with more coverage than other tractors of comparable size.

    *Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.

    Hood will not dent or rust and includes quality headlights for good visibility
    One-piece hood opens for service accessOne-piece hood opens for service access
    Quality headlights for good visibilityQuality headlights for good visibility

    The hood is made of molded-in color material:

    • Reduces sound
    • Will not rust or dent
    • Openings on the side of the hood let in plenty of cooling air while keeping the sound level low.
    • Two headlights provide good lighting for nighttime operation.
  • MowerPlus app screenMowerPlus app screen
    MowerPlus app maintenance screenMowerPlus app maintenance screen

    Keep a John Deere riding lawn mower running its best and know how it mows with the John Deere MowerPlus app. Simply scan the lawn tractor’s barcode to get custom information. The app helps determine the best time to mow, communicates expert pre-mow tips, offers maintenance reminders, and provides walk-through guides.

    Look for the MowerPlus app on the iOS® or Android™ system app stores.

    The app supports residential lawn equipment such as 100 Series, S240, X300, X500, X700, Z200 through Z600, and many similarly-sized older products. It does not presently support tractor models numbered 1000 and larger, such as 1025R.

    NOTE: Some product image variation may exist.

     

    MowerPlus hour meter connector also available (sold separately)
    MowerPlus hour meter connector packagingMowerPlus hour meter connector packaging

    The John Deere MowerPlus hour meter connector wirelessly links a 100 Series or S240 Lawn Tractor to the MowerPlus app on a mobile device. The hour meter connector transmits engine usage to the app, making it easy to track maintenance intervals:

    • iOS version 10 or higher is compatible with the hour meter connector.
    • Android versions are not compatible with the hour meter connector at this time.

    iOS is a trademark of Cisco Technology, Inc. used under license by Apple Inc. Android is a trademark of Google LLC.

  • Engine power
    18.5 hp
    13.8 kW

    Engine manufacturer/model
    FS600V

    Transaxle type
    K46 hydrostatic integrated with transaxle

    Transaxle control
    Two-pedal foot-controlled hydrostatic

    Rear tires
    20x10-8

    Steering type
    Sector and pinion with single drag link and tie rod

    Lift system type
    Lever on fender deck

    Cutting width
    Edge™ mower deck, 42 in.
    107 in.

    U.S. warranty
    3-year/200-hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)

  • Power
    18.5 hp
    13.8 kW

    Displacement
    36.8 cu in.
    603 cc

    Manufacturer/model
    FS600V

    Type
    Overhead valve, full-pressure lube, oil filter

    Cylinders
    V-twin, cast-iron liners

    Governor
    Mechanical

    Choke/speed control
    Separate levers, automatic choke return

    Cooling method
    Air

    Air cleaner
    Dry, replaceable with foam precleaner

    Oil drain
    No tools

  • Type
    Gasoline

    Fuel delivery
    Pulse pump and carburetor

    Fuel gauge
    Mechanical, viewable from seat

    Fuel tank location
    Rear

    Fuel fill opening
    Center, 1.75 in.
    4.45 cm

    Fuel tank capacity
    2.4 U.S. gal.
    9.1 L

  • Battery
    12 V
    195 CCA

    Charging system
    Flywheel alternator, regulated, 15 amp

    Engine starter
    Bendix type

    Hourmeter
    Yes, with service reminder

    Headlights
    Two standard, incandescent

    Taillights or reflector
    Reflectors

    Backup lights
    No

    Rear work lights
    No

    12-V outlet
    Optional

  • Type
    K46 hydrostatic integrated with transaxle

    Control
    Two-pedal foot-controlled hydrostatic

    Cruise control
    Standard

    Oil cooler
    Fins and fan on transaxle

    Oil filter
    Yes, internal, not replaceable

    Differential lock
    No

    Forward speed
    0-5.5 mph
    0-8.9 km/h

    Reverse speed
    0-3.2 mph
    0-5.1 km/h

    Brakes
    Internal wet disk

  • Frame
    Full-length welded steel

    Primer/paint
    E-coat/powder

    Weight bracket
    Optional rear

    Receiver hitch
    No

    Front axle
    Cast iron front axle, front wheel ball bearings

    Spindle bushings
    No

    Front tires
    15x6-6

    Rear tires
    20x10-8

    Hood material
    JD Loy, UV resistant

    Fender deck material
    Stamped steel

    Floor mats
    Yes, with debris removing channels

    Storage
    Storage tray with cover

    Service interval decal
    Yes

    Fender handles/grips
    Handgrips

    Cup holder
    Yes

    Equipment mounting
    CargO Mount™ system

  • Type
    Sector and pinion with single drag link and tie rod

    Four-wheel steer
    Not available on this model

    Steering wheel
    Deluxe, diameter - 14 in.
    35.6 cm

    Tilt steering wheel
    No

    Turning radius
    18 in.
    45.7 cm

    Uncut circle radius
    25 in.
    63.5 cm

  • Type
    Open-back design with grasp

    Seat back height
    15 in.
    38.1 cm

    Armrests
    No

    Fore-aft adjustment
    While seated, 5.5 in.
    14 cm

    Seat suspension
    Tilt, two rubber isolators

  • Type
    Lever on fender deck

    Hydraulic outlets
    No

    Mower cut height
    13 positions, 1-4 in.
    2.5-10.2 cm

    Cut height increments
    0.25 in.
    0.64 cm

    Preset cut height
    No

  • Type
    Side discharge

    Cutting width
    Edge™ mower deck, 42 in.
    107 cm

    Construction
    Stamped steel deck shell

    Mower deck material
    Steel, 13 gauge
    0.09 in.
    2.3 mm

    Mower wash port
    Yes

    Mower drive system
    Electric power take-off (PTO) clutch

    Mower wheels
    Two

    Mower wheel adjustment
    One bolt

    Mower level adjustment
    Easy-level deck

  • Type
    Slide under tractor

    Front draft arms
    One spring clip

    Rear draft arms
    Two spring clips

    Mower wheels rotate
    No

    Drive system
    Single belt

  • Meets ANSI standard
    Yes

    Meets OPEI standard
    Yes

    Backup protection
    Reverse Implement Option (RIO)

    Safety video
    Yes

  • Notes
    JD Loy hood resists fading, won't rust or dent
    Durable primer and powder paint finish
    Large, 14-in. (36-cm) steering wheel for more comfortable operation

    Warranty
    3-year/200-hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)

  • Mowers
    Standard, 42 in.
    107 cm

    Rear bagger
    2-bag, 6.5 bu
    229 L

    Powered material collection

    Mulching system
    Mulch cover or high-performance plug

    Front thatcher

    Front blade
    46 in.
    116.8 cm

    Mid-mount blade

    Snow blower
    Two-stage, 44 in.
    111.8 cm

    Rotary broom

    Rotary tiller

    Sleeve hitch

    3-point hitch

    Rear power take-off (PTO)

    Plow, moldboard

    Box scraper

    Cultivator

    Rear blade

    Disk harrow

    Landscape rake

    Sprayer
    Tow-behind only, 15 U.S. gal.
    56.8 L
    Tow-behind only, 25 U.S. gal.
    94.6 L

    Spreader
    Tow-behind only, 125 lb
    57.7 kg
    Tow-behind only, 175 lb
    79.4 kg

    Front bumper
    Standard two-bar styled front bumper

    Brush guard

    Weather protection
    Snow cab

    Sun canopy

    Rear receiver hitch

    Bucket holder
    Yes, single bucket

    Grass striping
    Lawn striping kit

    Tractor shovel

    Front loader

    Other equipment

    Tow-behind tools
    16

  • Height
    44.6 in.
    113.2 cm

    Overall length
    75.1 in.
    191 cm

    Wheelbase
    48.9 in.
    124.2 cm

    Width with mower
    54.9 in.
    139 cm

    Width with mower (deflector raised for storage)
    44.8 in.
    114 cm

    Width without mower

    Weight
    458 lb
    208 kg

  • a
    a


    D
    D

Related Products