E170 Lawn Tractor

  • 25 HP* V-Twin extended life series engine
  • Deep deck design with three blades lifts grass for a superior cut
  • Easy Change™ 30-Second Oil Change System for fast and convenient service
  • Popular Science Magazine awarded Easy Change™ 30-Second Oil Change System one of the top 100 Best of What’s New
MSRP Starting At

$2,449.00

No Ratings for E170 Lawn Tractor

Be the first to leave a rating!

  • 25-hp (18.6-kW) engine25-hp (18.6-kW) engine

    A 25-hp (18.6-kW) V-twin engine provides plenty of power and torque to handle tough mulching, mowing, and bagging conditions:

    • V-twin cylinder design for greater torque, lower vibration, and improved sound quality
    • Auto choke to allow operators to start the engine without needing the choke unless air temperatures are near or below freezing
    • Electronic ignition for fast starts
    • Spring-return feature to ensure the operator will not mistakenly leave the throttle lever in the choke position
    • Cast-iron cylinder liners for longer engine life
    • Overhead valves for excellent power and fuel economy
    • Full-pressure lubrication and oil filter for cleaner oil, prolonging engine life and extending the time between oil changes
      • Also more effective when operating the tractor on an incline
    • Includes extended-life series (ELS) engine features for enhanced performance and longer life
    • John Deere Easy Change™ 30-second oil change system makes changing the engine oil easy, quick, and clean.
    Fuel tank has gauge to show fuel level from the operator's seat
    Fuel tank gaugeFuel tank gauge
    Convenient fuel-filler openingConvenient fuel-filler opening

    The fuel tank gauge shows how much fuel is in the tank and can be seen without leaving the operator's seat:

    • Easy to check fuel level
    • Convenient location

    Fuel tank:

    • The capacity is 2.4 U.S. gal. (9.1 L).
    • The fuel-filler opening is conveniently located under the seat. 
      • Filling the tank without spilling is easy.
      • A tethered fuel tank cap is more convenient.
      • The sealed fuel cap helps keep vapors inside the tank.
      • The tractor has a California Air Resources Board (CARB) certified engine for reduced air pollution.
  • John Deere Easy Change 30-second oil change systemJohn Deere Easy Change 30-second oil change system

    The John Deere Easy Change 30-second oil change system makes changing the engine oil easy, quick, and clean. Changing the oil is as easy as twisting on a new oil-filled filter. Oil does not need to be drained from the engine.

    The John Deere Easy Change filter is an additional engine oil reservoir. Changing the filter removes the captured contaminants and replaces about 0.8 qt (0.76 L) of the engine oil.

    The functionality does not stop with ease of use. The Easy Change oil system has several meaningful benefits over the traditional oil filter system of the 100 Series:

    • A synthetic filter material is used for more predictable filtering and longer life.
    • Filtering capacity is greater than with a standard oil filter.
      • More filter surface area
      • More oil flow capacity
    • The system has 40 percent more oil volume.
    • The oil and engine run cooler.
    • The oil filter valve closes whenever the engine stops, so filtered particles are captured and cannot drain back into the engine.
    • The risk of spilling during oil service is greatly reduced.
    • Waste oil (and new oil production) is reduced by over 1,000,000 lb (453,592.4 kg) per tractor production year.
    • This system is not a compromise to just make oil changes easier—these engines pass the same expectations and rigorous testing as always.

    Partly due to these improvements, it is not necessary to remove and dispose of all the oil in the engine during service.

    Everyone who uses the John Deere Easy Change system saves time and avoids the mess of a traditional oil change. In the past, many 100 Series Lawn Tractor owners rarely or never got around to changing their engine oil. With John Deere Easy Change, even owners who previously would not consider changing the oil themselves can easily do it. The Easy Change 30-second oil change system is a no-mess, no-fuss solution the competition cannot match.

    Installation instructions are in the Operator’s Manual and in the John Deere Easy Change service part box.

    Please recycle. Many local government recycling programs, authorized retailers, auto-service centers, and auto-parts stores will puncture and recycle used oil filters and oil.

  • 24-hp (17.9-kW) engine shown24-hp (17.9-kW) engine shown

    This full-featured engine is engineered to deliver world-class endurance and power. A step above the competition, it is designed to be more dependable and longer lasting, saving time and money over the long run.

    Built to exceed demanding needs by incorporating premium features and innovative designs:

    • Overhead valve (OHV) design for cooler operation and longer valve life
    • Contains an advanced debris management system that directs cooling air through the rotating screen to the air cleaner compartment, where large debris is pre-filtered through ejector slots
      • Keeps unfiltered air out of the engine through a large, dual-sealed, premium oval-shaped cartridge-style filter
      • Ensures maximum protection for extended engine life with the premium air cleaner, a pleated paper filter with a foam precleaner
      • Captures fine particles for maximum protection and extended maintenance
    • Provides maximum protection with full-pressure lubrication system
      • Pumps oil by a mechanical gerotor-style pump to all critical engine components
      • Enhances the system through a premium automotive-style oil filter, which removes over 95 percent of oil contaminates
    • A premium bearing package for improved durability; includes a super-finished crank pin bearing with a 50 percent smoother surface to increase load capacity by 35 percent
      • Uses a premium DU Teflon®-coated bearing
      • Helps resist wear and increases durability through self-lubricating bronze bearing
    • Wear-resistant, chrome-plated valve stems for long-life valves
      • 44 percent smoother for longer life
    • Cast-iron cylinder sleeve for extended life
    • Dependable float-feed type carburetor with integral fuel pump
    • High-capacity fuel filter for dependable operation
    • Includes John Deere Easy Change™ 30-second oil change system for making it easy, quick, and clean to change the oil
    • Maintenance-free electronic ignition for quick, dependable starts
    • Platinum spark plugs for extended life

    Teflon is a trademark of The Chemours Company.

  • Solid one-piece frame Solid one-piece frame
    Solid one-piece frame Solid one-piece frame

    The solid one-piece frame is constructed of 12-gauge, 0.105-in. (2.66-mm) steel:

    • Full-length, robotically-welded frame design has high-strength steel rails for added strength and long life.
    • One-piece, steel fender deck is bolted to the frame.
    Cast-iron front axle will not bend
    Front axle and wheel spindleFront axle and wheel spindle

    The front axle is constructed of solid cast iron that will not bend:

    • Automotive-like steering system with sector and pinion steering gears and single drag link with a tie rod provides a very strong, low-effort, and tight-turning system.
    • Three grease fittings, on both steering spindles and center pivot, allow for regular lubrication to help maintain easy steering and minimize wear.
    • Large, 0.75-in. (1.9-cm) diameter wheel spindles provide excellent durability.
    CargO Mount™ system makes installation of rear bagger and other attachments easy
    Rear CargO Mount pointsRear CargO Mount points
    Front CargO Mount pointsFront CargO Mount points
    Rear bagger is mounted with CargO Mount pointsRear bagger is mounted with CargO Mount points
    Rear bagger is mounted with CargO Mount pointsRear bagger is mounted with CargO Mount points

    The CargO Mount system is a combination of front- and rear-mounting points providing convenient and easy installation of the sun canopy, rear bagger, and other attachments.

  • Snow blower, weather enclosure, weights, and chains on a 100 Series TractorSnow blower, weather enclosure, weights, and chains on a 100 Series Tractor
    Front blade, weather enclosure, and chains on a 100 Series TractorFront blade, weather enclosure, and chains on a 100 Series Tractor

    An advantage of lawn tractors is their ability to use equipment for snow removal. Lawn tractor owners can add a John Deere snow blower or front blade to make quick work of moving snow whenever the need arises. Weather enclosure and tire-chain attachments add comfort and performance.

    Equipment available for snow removal includes:

    • 44-in. (112-cm) Snow Blower
    • 46-in. (117-cm) Front Blade
    • Tire chains or TerraGrip traction belts
    • Weather enclosure
    • Weights

     

  • Two-pedal speed/direction controlsTwo-pedal speed/direction controls
    Forward speed control pedal in useForward speed control pedal in use

    A Kanzaki® Tuff Torq® hydrostatic transmission gives an infinite choice of speeds and makes changing the direction of travel easy. Side-by-side foot pedals control the speed and direction of travel:

    • Automotive-type accelerator controls ensure easy operation.
    • Operator can change direction without lifting foot off the platform.
    • Large pedal surface gives superior operator comfort.
    Hydrostatic transmissionHydrostatic transmission

    Appropriate transmissions are used in each model, depending on rear tire size and tractor performance requirements, to ensure excellent performance and reliability:

    • Tuff Torq TLT200A - E110, E120, E130
    • Tuff Torq TLT200B - E140, E150, E160
    • Tuff Torq K46AC - E170, E180
    Standard cruise control (E120, E130, E150, E160, E170, and E180)
    Cruise control leverCruise control lever

    An easy-to-use cruise control option maintains the tractor's speed for mowing larger areas:

    • To engage, lift up on the cruise lever and hold it until the foot is removed from the forward pedal.
    • To disengage, lightly press and then release the forward pedal.
    • For emergency stops, cruise can be released by pushing on the brake pedal or pushing down on the cruise control lever.

    NOTE: Cruise control is available on all models except the E100, E110, and E140.

    Kanzaki and Tuff Torq are trademarks of Kanzaki Kokyukoki Manufacturing Company.

  • Operator station is designed for comfort (E160 shown)Operator station is designed for comfort (E160 shown)
    Comfortable operator station, left side (E170 shown)Comfortable operator station, left side (E170 shown)

    The operator station is designed for operator comfort and easy operation:

    • Controls are positioned where they are easy to reach and use to control the tractor.
    • The steering wheel is positioned and angled to give the operator plenty of room and steering comfort.
    • The seat is tilted back at the optimum angle to provide the most comfortable operator position.
    Steering wheel and dashSteering wheel and dash
    Wide footrest with debris channelsWide footrest with debris channels

    Controls are easy to see and use:

    • A deluxe, 14-in. (35.6-cm) steering wheel provides greater operator comfort and control.
    • Ignition switch is on the dash for starting ease.

    Wide footrest areas with non-slip, anti-vibration rubber floor mats are provided for operator comfort:

    • Debris removing channels help keep the footrest area clean and dry.
    • The wide footrest makes it easier to step over the mower deck while entering or exiting the seat.
    Comfort Plus lumbar seatComfort Plus lumbar seat
    Comfort Plus lumbar seatComfort Plus lumbar seat
    Lumbar seat adjustment knobLumbar seat adjustment knob
    Easy-to-adjust seatEasy-to-adjust seat

    A 15-in. (38.1-cm), high-back, deluxe operator seat provides good support and lumbar adjustment for extra operator comfort. It is especially helpful when operating the tractor for extended periods of time.

    The seat can be easily adjusted forward or rearward while in it, with seat travel of 5.5 in. (14 cm) and 10 different positions.

    Seat springs give a smoother rideSeat springs give a smoother ride
    Seat tilted forward (shown on E180 Tractor)Seat tilted forward (shown on E180 Tractor)

    Two long seat springs give plenty of seat travel to smooth out the ride, keeping the operator comfortable while operating the tractor.

    The seat can be tilted forward for protection from the elements and to provide easy access to the fuel tank.

    Beverage holderBeverage holder
    Storage compartmentStorage compartment

    A beverage holder and storage compartment, located on the right fender, are conveniently located and easy to use.

    Handgrip on fenderHandgrip on fender

    Handgrips give extra comfort for the operator, especially when operating on hillsides. Reflectors make the tractor more visible.

  • E160 Tractor mowingE160 Tractor mowing
    Steering wheel and controlsSteering wheel and controls
    Instruments and controls

    The contoured dash has clean, attractive styling:

    • Controls are color coded and labeled for easy identification by the operator.
    • Controls are logically placed and easy to reach.
    • The hour meter makes it easy to tell when oil changes and other maintenance should be performed.
      • A service reminder feature will indicate that a general lubrication or mower/engine service interval has been reached.
      • When service is required, arrows will periodically flash for two hours. 
    • Functional design of the controls provides good appearance and a comfortable feel.
    Side-by-side transmission control pedals
    Two-pedal speed/direction controlsTwo-pedal speed/direction controls
    Side-by-side foot pedals and cruise control leverSide-by-side foot pedals and cruise control lever

    Side-by-side foot pedals control the speed and direction of travel:

    • Automotive-type accelerator controls ensure easy operation.
    • Operator can change direction without lifting foot off the platform.
    • Large pedal surface gives superior operator comfort.
    Cruise control (E120, E130, E150, E160, E170, and E180)
    Cruise control leverCruise control lever

    Cruise control is available on the E120, E130, E150, E160, E170, and the E180:

    • To engage, lift up on the cruise lever and hold until the foot is removed from the forward pedal.
    • For emergency stop, the cruise control can be released by pushing on the brake pedal or the forward pedal.
    Mower deck height adjustment
    Mower deck height adjustment leverMower deck height adjustment lever
    Mower deck height adjustment leverMower deck height adjustment lever

    A spring-assisted, low-effort lift lever simplifies setting and adjusting the mower cut height:

    • Increments of 0.25 in. (0.64 cm) allow fine-tuning the cut height.
    • Cut height is adjustable from 1 in. (2.5 cm) to 4 in. (10.2 cm).
    Parking brake control
    Brake/parking brake pedalBrake/parking brake pedal
    Parking brake leverParking brake lever

    The parking brake control is conveniently located for easy access. It holds the brake pedal securely in the locked position.

    Electric power take-off (PTO) clutch is easy and convenient to use
    Electric PTO engagement switchElectric PTO engagement switch

    The heavy-duty electric PTO clutch is operated with a convenient dash-mounted switch.

    Using RIO

    CAUTION: Children or bystanders may be injured by rotating blades. Before traveling forward or rearward:

    • Carefully check the area around the machine.
    • Disengage the mower before backing up.

     

    NOTE: Backing up while the mower is engaged is strongly discouraged. RIO should be used only when operating another attachment or when the operator deems it necessary to reposition the machine with the mower engaged.

     

    1. Stop forward travel.
    2. Look behind the machine to be sure there are no bystanders.
    3. Push and hold in the RIO switch while depressing the reverse pedal slightly for a hydrostatic transmission or moving the transmission shift lever to the rear slot (reverse) for a continuously variable transmission (CVT)/automatic transmission.

     

    NOTE: If the engine and mower or other attachment stops while repositioning the machine, return the attachment engagement lever/switch to the off position. Start the engine and engage mower or other attachment. Begin again with step 2.

     

    1. Release the RIO switch and reposition the machine as the machine begins to move rearward.
    2. Resume forward travel. The mower or other attachment should continue operating.
    3. Repeat procedure to position the machine again.
    Reverse implement option (RIO)
    RIO switchRIO switch
  • One-piece hood opens for service accessOne-piece hood opens for service access
    Service interval decal located under hoodService interval decal located under hood

    The one-piece hood opens easily to permit checking and servicing the engine:

    • Important service points are located within easy reach.
    • A service-interval decal is provided inside the tractor hood for convenience when servicing the tractor.
    John Deere Easy Change™ 30-second oil change systemJohn Deere Easy Change™ 30-second oil change system
    Seat tilted up for easy access to fuel-fill openingSeat tilted up for easy access to fuel-fill opening

    The John Deere Easy Change 30-second oil change system makes changing the engine oil easy, quick, and clean. Changing the oil is as easy as removing the old oil-filled filter and twisting on a new oil-filled filter. Oil does not need to be drained from the engine. The removed filter contains the captured contaminants and a portion of the engine oil.

    The seat tilts up and out of the way to make adding fuel easy.

    The 100 Series Tractors are covered by a 2-year/120-hour bumper-to-bumper warranty*:

    • Premium features of 100 Series Tractors allow for this long warranty period.

    *Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.

    Hood will not dent or rust and includes quality headlights for good visibility
    One-piece hood opens for service accessOne-piece hood opens for service access
    Quality headlights for good visibilityQuality headlights for good visibility

    The hood is made of molded-in color material:

    • Reduces sound
    • Will not rust or dent
    • Openings on the side of the hood let in plenty of cooling air while keeping the sound level low.
    • Two headlights provide good lighting for nighttime operation.
  • MowerPlus app screenMowerPlus app screen
    MowerPlus app maintenance screenMowerPlus app maintenance screen

    Keep a John Deere riding lawn mower running its best and know how it mows with the John Deere MowerPlus app. Simply scan the lawn tractor’s barcode to get custom information. The app helps determine the best time to mow, communicates expert pre-mow tips, offers maintenance reminders, and provides walk-through guides.

    Look for the MowerPlus app on the iOS® or Android™ system app stores.

    The app supports residential lawn equipment such as 100 Series, S240, X300, X500, X700, Z200 through Z600, and many similarly-sized older products. It does not presently support tractor models numbered 1000 and larger, such as 1025R.

    NOTE: Some product image variation may exist.

     

    MowerPlus hour meter connector also available (sold separately)
    MowerPlus hour meter connector packagingMowerPlus hour meter connector packaging

    The John Deere MowerPlus hour meter connector wirelessly links a 100 Series or S240 Lawn Tractor to the MowerPlus app on a mobile device. The hour meter connector transmits engine usage to the app, making it easy to track maintenance intervals:

    • iOS version 10 or higher is compatible with the hour meter connector.
    • Android versions are not compatible with the hour meter connector at this time.

    iOS is a trademark of Cisco Technology, Inc. used under license by Apple Inc. Android is a trademark of Google LLC.

  • E160 Tractor with 48-in. (122-cm) Edge cutting systemE160 Tractor with 48-in. (122-cm) Edge cutting system
    48-in. (122-cm) Edge cutting system48-in. (122-cm) Edge cutting system
    #

    The Edge cutting system has been trademarked to emphasize the advantages of the John Deere mower deck designs. They give superior convenience, performance, and reliability:

    • Deep-deck mower design lifts grass for a clean, even cut.
    • Smooth underside of mower prevents grass buildup and evenly disperses grass clippings.
    • The rolled outer edge of the deck provides extra strength and protection.
    • Dual-stage E-coat and powder paint coatings provide extra protection from rust.

    The 48-in. (121.9-cm) Edge mower deck is a three-spindle design with heavy-duty characteristics:

    • Four mower wheels are standard equipment for a smooth mowing job, even in rolling terrain.
    • Flexible discharge chute minimizes property and mower deck damage.
    • No tools are required to go from mulching (with mulch cover) to side discharge to rear bagging.
    • A mulch cover is an optional attachment that can be installed without the use of tools.
    • A high-performance mulching blade (GX21786) is available to enhance mulching performance.
    • Bagging blades are available to improve bagging performance.

    The mower deck has a rolled lip to provide greater strength and protection. The rugged 12-gauge, 0.105-in. (2.7-mm) steel-deck mower will provide years of dependable mowing.

    The blade-to-spindle design provides a unique mounting system for the mower blade that gives extra safety and convenience.

    A cut-and-throw, 6.5-bu (229-L) rear bagger is sold separately and comes with bagging blades.

    Mower wash port
    Mower wash portMower wash port
    Mower wash port with hose connectorMower wash port with hose connector

    A wash port is provided to make cleaning the underside of the mower deck easy:

    • A hose connector is included with mower deck.
    StarLock™ blade design
    StarLock blade designStarLock blade design

    The StarLock blade design keeps the blade bolt at the correct torque for easy removal.

    Optional blades for difficult mulching or bagging conditions are available.

    Mower deck height adjustment
    Mower deck height adjustment leverMower deck height adjustment lever
    Mower deck height adjustment leverMower deck height adjustment lever

    A spring-assisted, low-effort lift lever simplifies setting and adjusting the mower cut height:

    • Increments of 0.25 in. (0.64 cm) allow the operator to fine-tune the cut height.
    • Cut height is adjustable from 1 in. (2.5 cm) to 4 in. (10.2 cm).
    • The lift handle is shaped and located for easy use and is out of the way of entering or exiting operators.
  • An exclusive 2-year or 120-hour (whichever comes first), single-source, bumper-to-bumper warranty* is standard for all John Deere 100 Series Tractors.

    • The warranty is hassle free, with one company handling all of the paperwork.
    • Premium features of 100 Series Tractors allow for this longer warranty period, with more coverage than comparable tractors.

    *Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.

  • Engine power
    25 hp
    18.6 kW

    Engine manufacturer/model
    44S977 (M44)

    Transaxle type
    Hydrostatic, 2-wheel drive

    Transaxle control
    Two-pedal foot-controlled hydrostatic

    Rear tires
    22x9.5-12

    Steering type
    Sector and pinion with single drag link and tie rod

    Lift system type
    Lever on fender deck

    Cutting width
    Edge™ mower deck, 48 in.
    122 cm

    U.S. warranty
    2 year/120 hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)

  • Power
    25 hp
    18.6 kW

    Displacement
    44.2 cu in.
    724 cc

    Manufacturer/model
    44S977 (M44)

    Type
    Overhead valve, full-pressure lube, oil filter

    Cylinders
    V-twin - extended life series (ELS)

    Governor
    Mechanical

    Choke/speed control
    One lever, ReadyStart®

    Cooling method
    Air

    Air cleaner
    Cartridge with prefilter

    Oil drain
    Not required - Easy Change™ 30-second oil change system

  • Type
    Gasoline

    Fuel delivery
    Pulse pump and carburetor

    Fuel gauge
    Mechanical, viewable from seat

    Fuel tank location
    Rear

    Fuel fill opening
    Center, 1.75 in.
    4.45 cm

    Fuel tank capacity
    2.4 U.S. gal.
    9.1 L

  • Battery
    12 V
    300 CCA

    Charging system
    Regulated, 16 amp

    Engine starter
    Bendix type

    Hourmeter
    Yes, with service reminder

    Headlights
    Two standard, incandescent

    Taillights or reflector
    Reflectors

    Backup lights
    No

    Rear work lights
    No

    12-V outlet
    Optional accessory

  • Type
    Hydrostatic, 2-wheel drive

    Control
    Two-pedal foot-controlled hydrostatic

    Cruise control
    Standard

    Oil cooler
    Fins and fan on transaxle

    Oil filter
    Yes, not serviceable

    Differential lock
    No

    Forward speed
    0-5.5 mph
    0-8.9 km/h

    Reverse speed
    0-3.2 mph
    0-5.1 km/h

    Brakes
    Internal wet disk

  • Frame
    Full-length welded steel

    Primer/paint
    E-coat/powder

    Weight bracket
    Optional rear

    Receiver hitch
    No

    Front axle
    Cast-iron front axle, powdered-metal front wheel bushings

    Spindle bushings
    No

    Front tires
    16x6.5-8

    Rear tires
    22x9.5-12

    Hood material
    JD Loy, UV resistant

    Fender deck material
    Stamped steel

    Floor mats
    Yes, with debris removing channels

    Storage
    Storage tray with cover

    Service interval decal
    Yes

    Fender handles/grips
    Handgrips

    Cup holder
    Yes

    Equipment mounting
    CargO Mount™ system

  • Type
    Sector and pinion with single drag link and tie rod

    Four-wheel steer
    Not available on this model

    Steering wheel
    Deluxe, diameter - 14 in.
    35.6 cm

    Tilt steering wheel
    No

    Turning radius
    18 in.
    45.7 cm

    Uncut circle radius
    20 in.
    50.8 cm

  • Type
    One piece with lumbar adjustment

    Seat back height
    15 in.
    38.1 cm

    Armrests
    No

    Fore-aft adjustment
    While seated, 5.5 in.
    14 cm

    Seat suspension
    Tilt, two coil springs

  • Type
    Lever on fender deck

    Hydraulic outlets
    No

    Mower cut height
    13 positions, 1-4 in.
    2.5-10.2 cm

    Cut height increments
    0.25 in.
    0.64 cm

    Preset cut height
    No

  • Type
    Side discharge

    Cutting width
    Edge™ mower deck, 48 in.
    122 cm

    Construction
    Stamped steel deck shell

    Mower deck material
    Steel, 12 gauge
    0.105 in.
    2.7 mm

    Mower wash port
    Yes

    Mower drive system
    Electric power take-off (PTO) clutch

    Mower wheels
    Four

    Mower wheel adjustment
    One bolt

    Mower level adjustment
    Easy-level deck

  • Type
    Slide under tractor

    Front draft arms
    One spring clip

    Rear draft arms
    Two spring clips

    Mower wheels rotate
    No

    Drive system
    Single belt

  • Meets ANSI standard
    Yes

    Meets OPEI standard
    Yes

    Backup protection
    Reverse Implement Option (RIO)

    Safety video
    Yes

  • Notes
    JD Loy hood resists fading, won't rust or dent
    Durable primer and powder paint finish
    Large, 14-in. (36-cm) steering wheel for more comfortable operation
    John Deere Easy Change 30-second oil change system

    Warranty
    2 year/120 hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)

  • Mowers
    Standard, 48 in.
    122 cm

    Rear bagger
    2-bag, 6.5 bu
    229 L

    Powered material collection

    Mulching system
    Mulch cover

    Front thatcher

    Front blade
    46 in.
    116.8 cm

    Mid-mount blade

    Snow blower
    Two-stage, 44 in.
    111.8 cm

    Rotary broom

    Rotary tiller

    Sleeve hitch

    3-point hitch

    Rear power take-off (PTO)

    Plow, moldboard

    Box scraper

    Cultivator

    Rear blade

    Disk harrow

    Landscape rake

    Sprayer
    Tow-behind, 15 U.S. gal.
    56.8 L
    Mounted, 15 U.S. gal.
    Tow-behind only, 25 U.S. gal.
    94.6 L

    Spreader
    Tow-behind only, 125-175 lb
    57.7-80 kg

    Front bumper
    Standard two-bar styled front bumper

    Brush guard

    Weather protection
    Snow cab

    Sun canopy
    Yes

    Rear receiver hitch

    Bucket holder
    Yes, single bucket

    Grass striping
    Lawn striping kit

    Tractor shovel

    Front loader

    Other equipment

    Tow-behind tools
    16

  • Height
    45.7 in.
    116 cm

    Overall length
    75.6 in.
    192 cm

    Wheelbase
    48.9 in.
    124.2 cm

    Width with mower
    63 in.
    160 cm

    Width with mower (deflector raised for storage)
    51.7 in.
    131.3 cm

    Width without mower

    Weight
    Mower, no fuel, 512 lb
    232 kg

  • a
    a


    D
    D

Related Products