640R Loader

  • Tool-free removal and attachment with just a few, simple steps
  • Frame design that allows for maximum maneuverability
  • Repositioned leveling links for better visibility
  • Automatic Mast Latch system for quick change from loader to three-point implements

No Ratings for 640R Loader

Be the first to leave a rating!

  • Hydraulic shut-off valve (open position)Hydraulic shut-off valve (open position)
    Hydraulic shut-off valve (closed position)Hydraulic shut-off valve (closed position)

    A hydraulic shut-off valve is included with the R-Series Ag Loaders to ensure the loader does not lower suddenly. For example, this allows the boom to be locked out when someone is required to be located under the loader boom for service work on the tractor. It should not be used for extended periods of time unless an appropriate support stand is also utilized.

  • RTP screen shownRTP screen shown
    Hydraulic remote latch shownHydraulic remote latch shown

    The R-Series Loaders come with a number of options to enhance an operator’s experience and to allow more productivity in the field. These options include lighting, hydraulic remote implement latch, loader suspension system, and industry-exclusive return-to-position (RTP) Gen2 technology with electronic self-leveling.

     

    Loader lights for enhanced visibility in low-light conditions

    Hydraulic remote implement latch

    Return-to-Position (RTP) Gen2 with electronic self-leveling (ESL)

    Loader suspension system for a smoother ride

     

    All of these options are powered using a common electrical harness. Features can be added or subtracted to get the job done right.

  • Single-point hydraulic connection (open)Single-point hydraulic connection (open)
    Single-point hydraulic connection (closed)Single-point hydraulic connection (closed)

    The 620R, 640R, 660R, and 680R Loaders can be ordered with a single-point hydraulic connection that also incorporates the connection point for any electrical needs. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.

  • Concealed oil lines through boom arm (H-Series Loader is representative only)Concealed oil lines through boom arm (H-Series Loader is representative only)
    #
    Oil lines routed through the boom armOil lines routed through the boom arm
    Oil lines routed through the torque tubeOil lines routed through the torque tube

    Through time, increased width in tractor hoods have caused issues with available space for running traditional oil lines of a loader along the boom, making them more susceptible to damage.

     

    To improve this situation, the oil lines have been routed through the boom arm and the torque tube, improving line protection and the appearance of the loader.

  • False rod cylinderFalse rod cylinder
    #

    Fast bucket cycle times are important to dump the load from the bucket as quickly as possible (quite often) in order to be as productive as possible while completing loading operations. The bucket cylinder design can have a major impact on this cycle time, especially for the MSL loaders. 

     

    All MSL R-Series Loaders utilize false rod bucket cylinders. A false rod cylinder has a smaller displacement of oil requirement on the head end of the cylinder, which allows this cylinder to dump much faster than a normal cylinder.

  • Automatic mast latch systemAutomatic mast latch system
    #

    R-Series Loaders are now even easier to remove and reinstall due to an automatic mast latch system. Simply exit the tractor once for removal and once for reinstall to reduce the amount of downtime associated with loader parking.

     

    For a more detailed look at the steps, please refer to the operator’s manual.


    To remove the loader, follow these simple steps:

    • Set the bucket flat on ground, release the hydraulic pressure, and exit the tractor.
    • Set the adjustable parking stands on the ground. 
    • Flip the lock handles located on either mast to unlock the loader from the frames.

    • Disengage the hydraulic couplers and return to the tractor seat.
    • Back away from the loader.

    To reinstall the loader follow these simple steps:

    • Drive the tractor into the loader, resulting in mechanical connection (no more maneuvering the loader to fit into the frames).
    • Exit the tractor.
    • Fold up the parking stands.
    • Attach the hydraulic connection.
    • Enter the tractor and have full control of the loader.

     

  • Maximum lift height (A)
    4151 mm
    163 in.

    Lift capacity at full height
    Measured at pivot (U)
    2515 kg
    5545 lb

    Boom breakout force
    Measured at pivot (Y)
    2814 kgf
    6204 lbf

    Bucket rollback force capacity
    At ground-level line (ZZ)
    4365 kgf
    9623 lbf

    Clearance at full height - bucket dumped (C)
    3141 mm
    124 in.

    Dump angle, degrees (E)
    59 degree (angle)

    Rollback angle, degrees (G)
    52 degree (angle)

  • Model
    6110R/M, 6120R/M, 6130R/M

    Front tire
    480/70R24

    Rear tire
    520/70R38

    Front axle configuration
    MFWD w/ Limited Slip Differential

    Wheelbase
    2580 mm
    101 in.

    Pump capacity
    114 L/min
    30.1 gpm

    Rated pressure
    200 bar
    2900 psi

  • Base weight
    2072.3 kg

    Leveling configuration
    Non-Self Leveling (NSL)

    Bucket used
    Heavy-duty grapple 2450 mm
    Heavy-duty grapple 96 in.

    Bucket weight
    375 kg
    826 lb

    Lift capacity at full height
    Measured at pivot (U)
    2515 kg
    5545 lb
    Measured at 800 mm ahead of pivot (V)
    1757 kg
    3874 lb

    Lift capacity at 59 in. (1500 mm)
    Measured at pivot (W)
    2654 kg
    5851 lb
    Measured at 800 mm ahead of pivot (X)
    2080 kg
    4586 lb

    Boom breakout force
    Measured at pivot (Y)
    2814 kgf
    6204 lbf
    Measured at 800 mm ahead of pivot (Z)
    2114 kgf
    4661 lbf

    Bucket rollback force capacity
    At maximum height (VV)
    2509 kgf
    5531 lbf
    At 59-in. (1500-mm) lift height (XX)
    4301 kgf
    9482 lbf
    At ground-level line (ZZ)
    4365 kgf
    9623 lbf

    Dimensions
    Maximum lift height (A)
    4151 mm
    163 in.
    At full height - bucket level(B)
    3911 mm
    154 in.
    At full height - bucket dumped (C)
    3141 mm
    124 in.

    Overall length (I+F), ft (m)
    5.4 m
    17.6 ft

    Overall height in carry position (J)

    Digging depth (H)
    53 mm
    2 in.

    Reach
    At maximum height (D)
    993 mm
    39 in.
    At ground level - bucket level (F)
    2809 mm
    111 in.

    Bucket angle
    Dump angle, degrees (E)
    59 degree (angle)
    Rollback angle, degrees (G)
    52 degree (angle)
    Dump angle, ground
    144 degree (angle)

    Cycle times
    Loader raise, seconds
    3.5 seconds
    Loader lower, seconds
    2.63 seconds
    Bucket dump, seconds
    2.65 seconds
    Bucket rollback, seconds
    1.81 seconds

  • a
    a


    D
    D

Related Products