300R Loader

  • Compatible with 3R Series Tractors
  • Quik-Park™ mounting system for efficient attachment and removal
  • Easy maintenance for increased uptime
  • 999 pounds (453 kg) lift capacity

 

  • Quik-Park loader mounting system Quik-Park loader mounting system

    Quik-Park™ equipped loaders are designed for easy removal and mounting to and from the tractor without tools.

    The parking stand, attached to the front frame of the tractor, is an integral part of the loader during loader operation.

    The parking stand lowers into position by moving the joystick to the raised position once the latches are opened. This allows the loader to move to the parked position.

  • Close up of grease fitting Close up of grease fitting
    Pivot point grease fitting locations Pivot point grease fitting locations

    All pivot points on the loader have grease fittings that are accessible from the side of the loader to make greasing the loader much easier, ensuring that all grease points are more likely to be serviced. There is no more searching for grease points that are hard to find. Removing the grease gun from the grease fitting or zerk is not a problem either as sufficient radius has been left to allow the grease gun tip to be rotated to the side for removal from the fitting or zerk.

  • Maximum lift height (A)
    2284 mm
    90 in.

    Lift capacity at full height
    Measured at pivot (U)
    617 kg
    1360 lb
    Measured at 500 mm ahead of pivot (V)
    453 kg
    999 lb

    Boom breakout force
    Measured at pivot (Y)
    1295 kg
    2855 lb
    Measured at 500 mm ahead of pivot (Z)
    922 kg
    2032 lb

    Bucket rollback force capacity
    At ground-level line (ZZ)
    1188 kg
    2619 lb

    Clearance at full height - bucket dumped (C)
    1743 mm
    69 in.

    Dump angle, degrees (E)
    43 degree (angle)

    Rollback angle, degrees (G)
    25 degree (angle)

  • Model
    3120/3320/3520/3720/3033R/3039R/3046R

    Front tire
    7.00-14 6PR R1

    Rear tire
    11.2-24 6PR R1

    Front axle configuration

    Wheelbase
    1727 mm
    68 in.

    Pump capacity
    8.6 gpm

    Rated pressure
    2500 psi

  • Base weight
    257.21 kg

    Leveling configuration

    Bucket used

    Bucket weight
    93.8 kg
    207 lb

    Lift capacity at full height
    Measured at pivot (U)
    617 kg
    1360 lb
    Measured at 500 mm ahead of pivot (V)
    453 kg
    999 lb

    Lift capacity at 59 in. (1500 mm)
    Measured at pivot (W)
    771 kg
    1700 lb
    Measured at 500 mm ahead of pivot (X)
    595 kg
    1312 lb

    Boom breakout force
    Measured at pivot (Y)
    1295 kg
    2855 lb
    Measured at 500 mm ahead of pivot (Z)
    922 kg
    2032 lb

    Bucket rollback force capacity
    At maximum height (VV)
    1205 kg
    2657 lb
    At 59-in. (1500-mm) lift height (XX)
    1518 kg
    3347 lb
    At ground-level line (ZZ)
    1188 kg
    2619 lb

    Dimensions
    Maximum lift height (A)
    2284 mm
    90 in.
    At full height - bucket level(B)
    2123 mm
    83.5 in.
    At full height - bucket dumped (C)
    1743 mm
    69 in.

    Overall length (I+F), ft (m)
    3.122 m
    10.24 ft

    Overall height in carry position (J)

    Digging depth (H)
    76 mm
    2.9 in.

    Reach
    At maximum height (D)
    773 mm
    30.4 in.
    At ground level - bucket level (F)
    1381 mm
    54.4 in.

    Bucket angle
    Dump angle, degrees (E)
    43 degree (angle)
    Rollback angle, degrees (G)
    25 degree (angle)

    Cycle times
    Loader raise, seconds
    2.76 seconds
    Loader lower, seconds
    1.69 seconds
    Bucket dump, seconds
    2.91 seconds
    Bucket rollback, seconds
    1.72 seconds

  • a
    a


    D
    D

Related Products