220R Loader

  • Compatible with 2032R and 2038R tractors
  • Quik-Park™ mounting system for easy on, easy off in minutes
  • Optional single-point hydraulic coupler lets you connect the hydraulics in one click, no fuss and no mess
  • Quik-Change bucket system allows fast attachment changeovers for moving from chore to chore
  • Whether the operator is new or experienced to loader operations, it requires skill to maintain an even load and reduce the amount of material lost. With the MSL loader offering for 1 Family, 2 Family, 3D, and 3E Tractors, anyone can operate their loader with ease and confidence.  With the MSL loader, you will notice:

    • Loader implement will maintain position wherever the loader is lifted to
    • Increased lift capacities
    • Reduction of material lost during operation
    • Easy visibility of the bucket level indicator on the right-hand side of the loader boom to help determine the position of the front implement

     

    This loader is the first of its kind in North America for Compact Utility Tractors and can make any loader task easier and quicker to accomplish.

  • Quik-Park loader mounting system Quik-Park loader mounting system
    Quik-Park loader mounting system Quik-Park loader mounting system

    The 220R loader is designed to easily attach to and detach from the tractor without tools.

     

    The parking stand is attached to the mast and lowers into position by moving the joystick to the raise position once the latches are opened to allow the loader to move to the park position.

  • Quik-Change attachment Quik-Change attachment
    CUT carrier (Quik-Change) on 220R Loader and 1450-mm (57-in.) standard bucket CUT carrier (Quik-Change) on 220R Loader and 1450-mm (57-in.) standard bucket

    The Quik-Change attachment carrier allows one person to quickly change attachments without the use of tools. Simply roll the attachment back with the boom slightly off the ground, remove the retaining pins, and then roll the attachment forward and lower to the ground. To connect to another attachment simply align the attachment carrier with the hooks of the attachment, raise the boom for the carrier to engage the hooks of the attachment and rollback the attachment carrier. Then install the retaining pins and the carrier is ready to work.

    This provides a very effective means of changing attachments without having to purchase an option to facilitate changing attachments.

  • Pivot pin Pivot pin

    The pivot pins are made with a unique offset head design to eliminate cross-pins and cotter pins to retain the pin. Instead, the pin is held in place with a nut, which is very simple to install as it eliminates any alignment issues. The offset head of the pin prevents rotation of the pin and reduces pin wear.

     

    A lubrication groove in the cylinder pin provides a path for grease to ensure proper lubrication of the cylinder pin and long life.

     

    End-of-pin lubrication allows easy access for servicing grease points, which are visible from the side of the loader.

  • Maximum lift height (A)
    2160 mm
    85 in.

    Lift capacity at full height
    Measured at pivot (U)
    509 kg
    1120 lb
    Measured at 500 mm ahead of pivot (V)
    365 kg
    803 lb

    Boom breakout force
    Measured at pivot (Y)
    886 kgf
    1949 lbf
    Measured at 500 mm ahead of pivot (Z)
    618 kgf
    1360 lbf

    Bucket rollback force capacity
    At ground-level line (ZZ)
    972 kgf
    2138 lbf

    Clearance at full height - bucket dumped (C)
    1667 mm
    66 in.

    Dump angle, degrees (E)
    36 degree (angle)

    Rollback angle, degrees (G)
    34 degree (angle)

  • Model
    2032R, 2038R

    Front tire
    23x8.50-14 4PR R4

    Rear tire
    14-17.5 6PR R4

    Front axle configuration

    Wheelbase
    1725 mm
    68 in.

    Pump capacity
    20.2 L/min
    5.3 gpm

    Rated pressure
    17.23 MPa
    2499 psi

  • Base weight
    330.9 kg
    729 lb

    Leveling configuration
    Non-Self Leveling

    Bucket used
    1450 mm
    57 in.

    Bucket weight
    88 kg
    194 lb

    Lift capacity at full height
    Measured at pivot (U)
    509 kg
    1120 lb
    Measured at 500 mm ahead of pivot (V)
    365 kg
    803 lb

    Lift capacity at 59 in. (1500 mm)
    Measured at pivot (W)
    589 kg
    1296 lb
    Measured at 500 mm ahead of pivot (X)
    445 kg
    979 lb

    Boom breakout force
    Measured at pivot (Y)
    886 kgf
    1949 lbf
    Measured at 500 mm ahead of pivot (Z)
    618 kgf
    1360 lbf

    Bucket rollback force capacity
    At maximum height (VV)
    1044 kgf
    2297 lbf
    At 59-in. (1500-mm) lift height (XX)
    1302 kgf
    2864 lbf
    At ground-level line (ZZ)
    972 kgf
    2138 lbf

    Dimensions
    Maximum lift height (A)
    2160 mm
    85 in.
    At full height - bucket level(B)
    1999 mm
    79 in.
    At full height - bucket dumped (C)
    1667 mm
    66 in.

    Overall length (I+F), ft (m)
    3076 mm
    121 in.

    Overall height in carry position (J)

    Digging depth (H)
    149 mm
    6 in.

    Reach
    At maximum height (D)
    756 mm
    30 in.
    At ground level - bucket level (F)
    1351 mm
    51 in.

    Bucket angle
    Dump angle, degrees (E)
    36 degree (angle)
    Rollback angle, degrees (G)
    34 degree (angle)
    Dump angle, ground
    115 degree (angle)

    Cycle times
    Loader raise, seconds
    3.19 seconds
    Loader lower, seconds
    1.94 seconds
    Bucket dump, seconds
    4.76 seconds
    Bucket rollback, seconds
    2.91 seconds

  • a
    a


    D
    D

Related Products