New 1025R Sub-Compact Utility Tractor

25-45 Horsepower
REQUEST A QUOTE

 (439) Recommended by 88.6%

Starting at: $13,884.00

REQUEST A QUOTE
Key Features
  • Powerful Tier 4-compliant diesel engine
  • New, easy-lift hood with dual gas-charged lift struts
  • Premium Operator Station with ergonomic seat, armrests and fender lights
  • Auto-Connect™ mid-mower deck can be installed or removed in less than 5 minutes

More Info

Features

Fast and easy implement changeover
  • Front Quik-Tatch™ hitch makes changing front implements quick and easy
  • All front implements (blade, brooms, and snow blowers) use a common hitch
  • AutoConnect™ mid-mount mower decks, D120 and H120 Loaders, and 260 Backhoe can be taken on or off within 5 minutes, and no tools are necessary
  • Changing rear implements is a snap with the iMatchTM Quick-Hitch, which has three fixed points to back in and pick up a rear implement that is iMatch compatible
  • Rotary cutters and tillers can be installed in no time without leaving the seat of the tractor with the iMatch™ AutoHitch™ system

*Features shown are available with all current model year tractors.

Easy-open, gas-lift hood
Gas-lift springGas-lift spring
  • The under-hood gas-lift support provides easy one-finger access to the engine compartment and eliminates the need for a mechanical prop rod.
  • This design of the support structure provides excellent rigidity for the hood.
Hydrostatic transmission (HST) with Twin Touch™ foot controls

The 1023E and 1025R Tractors feature a HST.

  • Fluid under pressure transmits engine power to the drive wheels through a hydraulic pump and motor
  • The hydrostatic-drive unit functions both as a clutch and transmission
Twin Touch foot controls Twin Touch foot controls

Twin Touch foot controls allow selecting both speed and direction of travel with a touch of the toe. Ideally suited for jobs where productivity is a must, such as loader or mower applications.

  • Infinite ground speeds, even at full throttle, to match the job
  • No clutching for fast direction changes
  • Faster, easier, and more precise to operate than competitive tractors with treadle pedal design (toe-heel)
  • Provides high torque for start up
  • Reduces power train shock loads
  • Large foot pedals were designed for operator comfort and allow for convenient operation of the tractor
Two-speed transmissionTwo-speed transmission

Transmission has two speeds - Hi and Lo range.

  • The range lever is located next to the seat, conveniently within reach of the operator
  • Lo range allows performing tougher tasks at higher speeds than competitive tractors equipped with a three-range transmission (that is, lo range on three-speed transaxle is slower than lo range on a two-speed transaxle)

 

Durability features include:

  1. Large forged one-piece trunnion shaft with larger support bearings that reduce vibration and noise.
  2. Innovative transaxle combines an HST, gear reduction axle, and clutch.
  3. Pressure side filtration allows using a finer-mesh filter (10 micron) than suction filtration systems use on many competitive tractors.
  4. One pump to supply charge pressure and implement flow. A flow divider splits the flow to various circuits throughout the tractor.
  5. The transaxle has an oil cooler which provides improved hydraulic cooling performance.
Optional iMatch™ Quick-Hitch feature allows for easy implement hookup
iMatch Quick-HitchiMatch Quick-Hitch
iMatch Quick-Hitch with rotary cutter hookupiMatch Quick-Hitch with rotary cutter hookup
iMatch Quick-Hitch (LVB25976)iMatch Quick-Hitch (LVB25976)
iMatch Quick-Hitch with rotary cutter hookup (LVB25976)iMatch Quick-Hitch with rotary cutter hookup (LVB25976)

One of the greatest operator concerns involves difficulty in attaching tractor implements. John Deere has addressed this issue with the iMatch Quick-Hitch.

The iMatch Quick-Hitch provides easy hookup and a guaranteed fit for all Category 1 implements that are designed to meet the American Society of Agricultural and Biological Engineers (ASABE) Category 1 Standard S278.6 for quick-attach hitches.

  • All implements require a set of bushings in order for the attachment to fit and work properly with the iMatch Quick-Hitch. One set of bushings comes with the iMatch Quick-Hitch.

NOTE: The bushing set can be seen in the picture above. These bushings allow the hooks on the iMatch and the pins on the implement to fit together properly. All other implements (box blades, tillers, rear blades, etc.) will require a set of bushings to enlarge the pin to fit with the iMatch hooks. Bushings of different lengths can be found in the parts system or through a bushing supplier (see dimensions below).

  • Upper bushing
    • Inside diameter: 1.93-1.95 cm (0.76-0.77 in.)
    • Outside diameter: 3.15-3.18 cm (1.24-1.25 in.)
  • Lower bushings
    • Inside diameter: 2.24-2.26 cm (0.88 to 0.89 in.)
    • Outside diameter: 3.63-3.66 cm (1.43 to 1.44 in.)
Powerful Tier 4-compliant diesel engine and standard dual mid-selective control valve (SCV)
Powerful engine
  • Tier-4-compliant isolated Yanmar® TNV clean and silent diesel engine
  • 24.2 gross hp (PS) - 18.0 power take-off (PTO) hp
  • 3200 rpm rated speed
Strong hydraulics
  • Standard dual mid-selective control valve (SCV) with integrated loader joystick
  • Third-SCV kit
  • Power-beyond kit
  • Independent hydraulic-lift kit
Comfortable operator station and controls
  • Ag tractor family styling with sloping hood design
  • Folding rollover protective structure (ROPS)
  • Deluxe-suspension seat with armrests
  • Standard cruise control
  • Tilt steering
  • Standard tool box
  • 12-V outlet
  • Ergonomic-floor mat
  • Cup holder
  • Standard side fender lights
Versatile implements
  • D120 and H120 Loaders
  • 54D AutoConnect™ and 60D AutoConnect 7-Iron™ mower decks
  • Material-collection system
  • 260 Backhoe
  • iMatch™ AutoHitch™
  • Rotary brooms 132.1 cm and 152.4 cm (52 in. and 60 in.)
  • Front blade 137.2 cm (54 in.)
  • Snow blowers 119.4 cm and 137.2 cm (47 in. and 54 in.)
  • Rotary tillers (647)

 

Yanmar is a U.S.-registered trademark of Yanmar Company Limited.

Easy operation four-wheel drive (4WD) power steering

Both 4WD and power steering are standard equipment on the 1025R. This combination allows for excellent maneuverability and ease of operation of the tractor.

  • Narrow overall width allows the 1025R to work in tight areas where most compact tractors just cannot fit, yet the 144.8-cm (57-in.) wheel base and 119.4 cm (47 in.) overall width gives great stability for all type of terrains.
  • Power steering means fewer turns of the steering wheel than manual steering; especially valuable when mowing around obstacles or when the tractor is used with a front loader.
  • High horsepower-to-weight ratio makes the 1025R a good choice for a variety of tasks; overall tractor weight reduces ground compaction and makes the 1025R an excellent mowing tractor.
  • The power take-off (PTO) is a fully-independent PTO on the 1025R, allowing engaging and disengaging of the PTO without stopping tractor movement. This is important when driving across obstacles such as driveways while mowing.
Mower deck lift components
1025R Tractor1025R Tractor
  • The 1 Family tractors includes factory-installed mechanical deck lift components.
  • The addition of these components from the factory significantly reduces the time required to do the initial mower deck installation at the time of purchase.
  • Refer to the mowers and material collection page for more details on mower deck installation and compatibility.
Optional cab offers protection from elements

The field-installed cab offers protection from the elements and expands the versatility of 1025R Tractors to perform in all climates.

1025R Cab – LP680871025R Cab – LP68087
#

Key features:

  • Full glass doors for maximum visibility
    • Curved glass for a styled look
    • Sealed for cold weather operation
    • Easily removable for summer operation
  • Heater with fan
    • Switches and vents integrated into headliner
  • Dome light
  • Fully openable front and rear windows with gas struts
  • Front sun visor
#
#
  • Front work lights
#
#
  • Front wiper with washer system
  • Dual outside mirrors
  • Rollover protective structure (ROPS) certified cab frame
    • Allows for improved rear visibility
    • Reduces overall height
  • Rubber isolation at all mounting points
  • Interior sound insulation
#
#
  • Immersion-primed and powder-coated cab frame
    • Provides superior corrosion resistance
  • Integrated John Deere styling
#
#

Specifications:

  • Cab height: 1525 mm (60 in.)
  • Overall height when installed: 1990 mm (78.4 in.)
  • Overall height when installed to top of beacon: 2159 mm (85 in.)
  • Overall width with cab installed: same as tractor width
  • Cab weight: 200 kg (440 lb)
#
#
#

Optional kits:

  • Rear wiper kit – LP68115
  • Stereo kit – LP68120
  • Beacon light kit – LP68116
  • Light-emitting diode (LED) rear work light kit – LP68117
  • Illuminated license plate kit – LP68118
  • Retro-fit kit – LP68119
    • Required for all 1026R Tractors. Also required for 1025R Tractors built prior to calendar year 2016.  Calendar year 2016 machines will have a G in the 10th position of the serial number.
    • NOTE: Any tractor that does not have the gas-lift struts on the hood will require this retro-fit kit.                                                                 

Compatibility and Installation:

  • Compatible with:
    • 1025R
    • 1026R
  • Not compatible with:
    • 1023E
    • 1025R TLB (FILB)
    • 1026R TLB (FILB)
  • Compatible with all tractor implements except 260 Backhoe.
  • Cabs will be shipped direct to the dealership and installed by a service technician.
  • Estimated installation time is 7-8 hours.
Implement compounding improves efficiency
Implement compounding (1025R Tractor shown)Implement compounding (1025R Tractor shown)
  • Allows mounting more than one implement at a time, eliminating implement changeover
  • Loader, mid mower, backhoe, and a variety of 3-point hitch implements can be attached to the tractor at the same time
Open operator's station is comfortable and convenient
Open operator's stationOpen operator's station

The 1025R operator's station has been designed to allow greater operator comfort and increased visibility. Large and easy to grab handrails are located on each fender for an easier on and off of the tractor from either side.

  • Sloping hood design provides improved visibility
  • Operator's station provides plenty of room for comfortable operation
  • Step-through textured flat operator station makes getting on and off the tractor easy from either side of the tractor 
  • Fender-mounted handrails are large and easy to grab; located on each fender, they assist the operator in getting on and off the tractor
  • Controls are located next to the fenders for operator convenience
  • Operator controls are color-coded for easy identification of operation
  • Front-horizontal exhaust for increased operator visibility

*Features shown are available with all current model year tractors.

Operator presence systemOperator presence system
  • If the operator leaves the tractor seat when the transmission, mid or rear power take-off (PTO) is engaged, the engine will shut down
Foldable Roll-Gard ROPS Foldable Roll-Gard ROPS

Foldable Roll-Gard™ rollover protective structure (ROPS) and retractable-seat belt are standard equipment to protect the operator in the event of a tractor tip-over, as well as improve the ability to store tractor in a garage.

 

Seat belt is within easy reach of the operator, to encourage the use of it whenever operating the tractor.

*Features shown are available with all current model year tractors

Lighting
Standard (and optional) lighting shownStandard (and optional) lighting shown

Standard equipment lighting includes:

  • Two front-mounted sealed-beam halogen headlights
  • Two amber-flashing warning/hazard lights mounted on the side of the ROPS with reflectors
  • Two additional fender lights are standard on the 1025R
  • Additional front- and rear-light kits are available

*Features shown are available with all current model year tractors

Specifications

Engine
Family EYDXL1.27NS1
FYDXL1.27NS1
GYDXL1.27NS1
Manufacturer Yanmar
Engine model 3TNV80F-NCJT
Engine power (gross) 17.8 kW
23.9 hp
24.2 PS
SAE J1995 rated power
Power take-off (PTO) power 13.4 kW
18 hp
Rated engine speed 3200 rpm
Type Diesel
Injection pump type Indirect Injection
Aspiration Natural
Emissions compliance Final Tier 4
Cylinders/displacement 3 / 1.267 L
3 / 77.3 cu in.
Number of cylinders Three
Cylinder liners Cast-in-block
Bore and stroke 80x84 mm
3.15x3.31 in.
Compression ratio 23.0:1
Lubrication Pressurized
Cooling system Water pump
Air cleaner Dual element with mechanical restriction indicator
Engine torque at rated speed 55.2 Nm
40.7 lb-ft
Fuel tank capacity 21.2 L
5.6 U.S. gal.
Electrical
Battery size 500 CCA
Alternator (12-V) 40 amp
Starter size 1.2 kW
1.6 hp
Fuel system
Type Indirect Injection
Fuel consumption 5.8 L/hr
1.5 U.S. gal./hr
Transmission
Standard transmission; forward/reverse Hydrostatic - 2 range
Optional transmission; forward/reverse
Left-hand reverser No
Transmission gear ranges
Final drive Bull Gear
Brakes Wet disc (left-hand pedal)
Steering Power
Clutch, wet/dry N/A
Clutch disk diameter wet clutch
Axle capacity Front
612 kg
1349 lbRear
715 kg
1576 lb
Creeper No
Cruise control Standard
Differential lock Yes
Drawbar maximum vertical load
Hydraulics
Type Open center
Pump rated output Steering
10.8 L/min
2.8 gpmImplement
13.2 L/min
3.5 gpm
24 L/min
6.3 gpm
Pump type Gear
Maximum operating pressure 137.9 bar
2000 psi
Draft control sensing Position control
Remote control valves available Two
3-point hitch
Category Limited Category 1
Lift capacity, 24-in. behind link arms 309 kg
681 lb
Power take-off (PTO)
Standard Rear - 540 rpm
Mid - 2100 rpm
Optional
Control Independent
Clutch Wet disc
Brake (for mid and rear PTO) Wet disc
Engagement method
Fluid capacities
Crankcase with filter 2.7 L
2.9 qt
Transmission and hydraulic system 3.7 gal.
14 L
Final drive
Type Bull Gear
Differential lock Yes
Operator station
Rollover protective structure Type
Foldable
Yes
Platform - flat/straddle One-piece semi flat
Gear shift location - console/floor Left-hand side
Cab
Compliance NA
Visibility NA
Air conditioning, temperature differential NA
Doors NA
Noise rating NA
Seat equipment NA
Dimensions
Wheelbase 145 cm
57.1 in.
Front axle clearance 195 mm
7.7 in.
Turning radius with brakes
Turning radius without brakes 2.25 m
7.4 ft
Limited slip differential No
Approximate shipping weight (open-station; cab) 655 kg
1444 lb
Tires
Front R4 - 18x8.5-10
Rear R4 - 26x12-12
Front tread range 91.8 cm
36.1 in.
Rear tread spacing
Miscellaneous
Toolbox Yes
Tilt steering wheel
12-V Outlet
Additional information
Date collected

Accessories and Attachments

Cold Start Packages

Engine Block Heater Adapter - AM134805
Engine block heater adapterEngine block heater adapter

Fits into engine block to help provide faster and easier starts in extremely cold weather (below 0°F or –18°C). Uses 110-volt electricity.

Allow one hour to install.

Engine

Engine Coolant Heater Kit (110 Volt) - BLV10640
Engine coolant heater kitEngine coolant heater kit

Attached to the engine cylinder block, the engine coolant heater plugs into a 120-V electrical outlet to warm the engine for fast cold-weather starts.

 

NOTE: It is recommended to install optional engine coolant heater, transmission oil heater, and battery heating pad (A22400P - ordered through A and I) if operating machine in temperatures below -18 ⁰C (0⁰F).

Spark Arrester Screen for Muffler - LVA15392

Hood Guards

Deluxe Hood Guard (1023E, 1025R & 1026R Tractors) - BW15901
Hood Guard (1023E, 1025R & 1026R Tractors) - BW15900

Hydraulics

Power Beyond Kit - LVB25956
Power-beyond kitPower-beyond kit

The power-beyond kit allows accessing pressurized hydraulic oil at the rear of the tractor for operating attachments equipped with an open center control valve, such as a backhoe and log splitter.

Required for use of the 260 Backhoe.

NOTE: This kit is not included with the 260 Backhoe sub-frame for 1 Series Tractors.

Rear Hydraulic Kit - LVB25837
Third Selective Control Valve Kit  - BLV10351

Lighting

Auxiliary Rear Work Light Kit (1 Light) - LVB25547
Rear work lightRear work light

This kit provides light to the rear of the tractor for evening work.

 

For open-station tractors only, this kit contains individual light.

 

Allow 30 minutes to install.

 

NOTE: Kit includes one rear light.

NOTE: Both the rear- and forward-work lights are compatible together and with the light-brush guard kits. The light kit contains a two-to-four pigtail that plugs into the main harness, as if only plugging one set of lights, providing two sets of plugs to use for forward and rear-work lights. The forward light is installed on top of the brush guard, and the rear light is installed inside the ROPS using the bolt holding the light and brush guard on.

NOTE: For 102E3 and 1026R Tractors – kit interference during backhoe operations (mounted inside ROPS) – use LVB25546 forward-light kit as an alternative.

Forward Lighting Kit (2 Lights) - LVB25546
#

The forward-lighting kit provides extra visibility when working in dark conditions. Lights attach to the brush guards located on the rollover protective structure (ROPS). Each kit contains two lights.

 

NOTE: Requires BLV10400 warning light brush guard kit and LVB26026 light kit harness. Not compatible with LVB25547 rear work light kit (1023E).

 

NOTE: Requires BLV10400 warning light brush guard kit. Not compatible with LVB25547 rear work light kit (1025R, 2025R, 2032R, 2038R, 3025E, 3032E, 3038E, 4105, 4044M, 4052M, 4066M).

 

NOTE: Requires BLV10620 premium warning light brush guard kit. Not compatible with LVB25547 rear work light kit (3033R, 3039R, 3046R, 4044R, 4052R, 4066R).

LED Work Light Kit - BLV10497
#
#

 Rollover protective structure (ROPS) mounted LED work lights

An optional LED work light kit is available for all open-station compact utility tractors. These lights provide extra visibility when working in dark conditions and have 180-degree rotation to face forward or backward. The kit contains two lights and the mounting hardware required for installation.

This lighting kit is mounted to the warning light brush guard kit, which is mounted to the ROPS and requires attachment BLV10400 for installation.
  
The halogen work light kit attachment is still available (LVB25546).

Warning Light Brush Guard Kit (Two Guards) - BLV10400

ROPS warning-light brush guards protect turn signal/warning lights from damage caused by low branches on trees.

Two guards are included in each kit and are for open-operator station (OOS) tractors only.

Work Light Brush Guard Kit (OOS Only) - BLV10399
#
#
#

An optional premium light kit is available to provide extra visibility when working in dark conditions. The premium light kit includes the following:

  • Two light-emitting diode (LED) fender lights
  • Two LED rollover protective structure (ROPS) work lights (adjustable 360 degrees for forward or rear lighting)
  • One LED rear PTO light

Miscellaneous

3-Point Hitch Tractor Receiver Hitch - LP25001
55-amp alternator - LVB25015
ABS Plastic Canopy - LP25000
Filter Pak - LVA21036
Typical home maintenance kitTypical home maintenance kit

Filter Paks are a handy and convenient way for dealers to supply a customer with the maintenance-interval parts as specified in their operator's manual. These kits contain an oil filter, air filter, fuel filter and hydraulic filter, offering a complete solution for all your customers’ maintenance needs to keep their tractors running at peak performance.

 

Benefits of Filter Paks:

  • Convenience – all filters in one package 
  • Value – better pricing than purchasing individual components
  • Performance – you get the most out of the capability of your tractor

 

Easy to understand – indicates models and contents so you never have to worry about the right filters for your compact utility tractor

Loader Mount Toolbox Kit - LVB26110
Toolbox shown on 1026R TractorToolbox shown on 1026R Tractor

This handy-toolbox kit provides easy access and convenient storage for tools.

Operator Environment

Weather Protection Umbrella - TY25324
UmbrellaUmbrella

Provides the operator the necessary shade and protection from the elements.

  • Attaches to the tractor's rollover protective structure (ROPS)
  • For open-station tractors only

Operator Manual and Decal Kit

French North American Owner's Manual and Decal Kit - BLV10751
Spanish North American Owner's Manual and Decal Kit - BLV10158

Operator's Station

Beacon Light Kit - LP68116
Console Adapter Kit for Non-Current Tractors - LP68119
Drop-on cab from Mauser (Heat Only) - LP68087
Illuminated Rear License Plate Kit - LP68118
Rear LED Work Light Kit - LP68117
Rear Wiper Kit - LP68115
Stereo Kit - LP68120

Rear Hitch

iMatch Quick Hitch Bushings - LVU12858
iMatch Quick-Hitch Category 1 with adjustable top hook - LVB25976

Tire Chains

Tire chains (pair) for 26x12-12 tires - TY15958
Tire chainsTire chains

Tire chains increase traction dramatically under ice and snow conditions.

NOTE: Not intended for use on all four rear tires on the TH 6x4.

Weights

50-lb (23-kg) Wheel Weight (1), cast iron, 12-in. rear wheel - BM17972
#

One or two 23-kg (50-lb) cast-iron weights may be installed on each rear wheel to provide extra traction and stability.

  • Made of durable cast iron and painted John Deere yellow
  • May be installed with wheel in either the narrow or wide position
  • To stack the weights and install two on a wheel, two 1/2x8-in. bolts are required per wheel (not furnished)
50-lb (23-kg) Wheel Weight (1), plastic, rear 12-in. wheel, with mounting hardware - BM17976
23-kg (50-lb) plastic-shell rear-wheel weight23-kg (50-lb) plastic-shell rear-wheel weight

One 23-kg (50-lb) plastic-shell rear-wheel weight may be installed on each rear wheel to provide extra traction and stability.

  • Outer shell made of tough polyethylene plastic
  • Filled with a heavy granular material that contains a high iron percentage
  • A bonding substance is added to hold the material together so that it will remain intact even if shell is damaged

Multiple stacking is not recommended.

 

Overall width of the tractor will be increased by approximately 5 cm (2 in.) when weights are installed.

Schematic of weight installed on wheelSchematic of weight installed on wheel

Weights are packaged one per carton, with necessary hardware for installation on a wheel, in either the narrow or wide position.

Front Weight Bracket Extension Kit (1023E, 1025R, 1026R, 2305, 2025R, 2320, 2520) - BLV10623
Mounting hardware (1) for attaching 72-lb (33-kg) Starter Weight and (2) 50-lb (23-kg) Cast-Iron Weights on 26-in. Tire - BM18101

NOTE: Plastic rear-wheel weight comes with necessary hardware for installation.

23-kg (50-lb) cast-iron wheel weights23-kg (50-lb) cast-iron wheel weights

For 23-kg (50-lb) cast-iron wheel weights on 26x12-in. rear tyres:

NOTE: Order two sets for both sides of the tractor.

33-kg (72-lb) starter cast-iron wheel weight33-kg (72-lb) starter cast-iron wheel weight

For 33-kg (72-lb) starter cast-iron wheel weight on 26x12-in. rear tyres:

NOTE: Order two sets for both sides of the tractor.

33-kg (72-lb) starter and 23-kg (50-lb) cast-iron weight(s)33-kg (72-lb) starter and 23-kg (50-lb) cast-iron weight(s)

For 33-kg (72-lb) starter and 23-kg (50-lb) cast-iron weight(s):

 

NOTE: Order two sets for both sides of the tractor

Mounting hardware (1) for attaching 72-lb (33-kg) Starter Weight on 26x12-12 Tire - BM18089

NOTE: Plastic rear-wheel weight comes with necessary hardware for installation.

23-kg (50-lb) cast-iron wheel weights23-kg (50-lb) cast-iron wheel weights

For 23-kg (50-lb) cast-iron wheel weights on 26x12-in. rear tyres:

NOTE: Order two sets for both sides of the tractor.

33-kg (72-lb) starter cast-iron wheel weight33-kg (72-lb) starter cast-iron wheel weight

For 33-kg (72-lb) starter cast-iron wheel weight on 26x12-in. rear tyres:

NOTE: Order two sets for both sides of the tractor.

33-kg (72-lb) starter and 23-kg (50-lb) cast-iron weight(s)33-kg (72-lb) starter and 23-kg (50-lb) cast-iron weight(s)

For 33-kg (72-lb) starter and 23-kg (50-lb) cast-iron weight(s):

 

NOTE: Order two sets for both sides of the tractor

Mounting hardware (1) for attaching two 50-lb (23-kg) Weights on 23-in., 24-in., or 26-in. Tire - BM17977

NOTE: Plastic rear-wheel weight comes with necessary hardware for installation.

23-kg (50-lb) cast-iron wheel weights23-kg (50-lb) cast-iron wheel weights

For 23-kg (50-lb) cast-iron wheel weights on 26x12-in. rear tyres:

NOTE: Order two sets for both sides of the tractor.

33-kg (72-lb) starter cast-iron wheel weight33-kg (72-lb) starter cast-iron wheel weight

For 33-kg (72-lb) starter cast-iron wheel weight on 26x12-in. rear tyres:

NOTE: Order two sets for both sides of the tractor.

33-kg (72-lb) starter and 23-kg (50-lb) cast-iron weight(s)33-kg (72-lb) starter and 23-kg (50-lb) cast-iron weight(s)

For 33-kg (72-lb) starter and 23-kg (50-lb) cast-iron weight(s):

 

NOTE: Order two sets for both sides of the tractor

Wheels and Tires Front

18x8.50-10 (4PR, R3 Turf, 1 Position) Front Wheels & Tires - LVB25850
Turf tread (R3)Turf tread (R3)
Industrial tread (R4)Industrial tread (R4)

Tire tread applications:

  • All front wheels and tires on the 1023E, 1025R, and 1026R Tractors (industrial and turf) are one (1) position wheels. Front wheels should never be put in widest position
  • Turf tread (R3)—spreads tractor's weight over a large area for improved flotation and reduced turf damage
  • Industrial tread (R4)—provides good traction and spreads tractor's weight over a large area for good flotation and reduced turf damage

NOTE:

1) Front and rear tread dimensions are finely matched to keep tires from running on the rows and damaging crops. See dimensions information for tread dimensions.
2) Tire dimension will vary slightly due to manufacturing tolerances.
3) Tire dimensions will increase slightly with tire age.
The front tires run slightly faster that the rear tires when in four-wheel drive (4WD). Front and rear tire options available from the factory will maintain the correct ratio (over speed).

18x8.50-10 (4PR, R4 Industrial, 1 Position) Front Wheels & Tires - LVB25848
Turf tread (R3)Turf tread (R3)
Industrial tread (R4)Industrial tread (R4)

Tire tread applications:

  • All front wheels and tires on the 1023E, 1025R, and 1026R Tractors (industrial and turf) are one (1) position wheels. Front wheels should never be put in widest position
  • Turf tread (R3)—spreads tractor's weight over a large area for improved flotation and reduced turf damage
  • Industrial tread (R4)—provides good traction and spreads tractor's weight over a large area for good flotation and reduced turf damage

NOTE:

1) Front and rear tread dimensions are finely matched to keep tires from running on the rows and damaging crops. See dimensions information for tread dimensions.
2) Tire dimension will vary slightly due to manufacturing tolerances.
3) Tire dimensions will increase slightly with tire age.
The front tires run slightly faster that the rear tires when in four-wheel drive (4WD). Front and rear tire options available from the factory will maintain the correct ratio (over speed).

Wheels and Tires Rear

26x12-12 (4PR, R3 Turf, 1 Position) Rear Wheels & Tires - LVB25849
Turf tread (R3)Turf tread (R3)
Industrial tread (R4)Industrial tread (R4)

Tire tread applications:

  • All front wheels and tires on the 1023E, 1025R, and 1026R Tractors (industrial and turf) are one (1) position wheels. Front wheels should never be put in widest position
  • Turf tread (R3)—spreads tractor's weight over a large area for improved flotation and reduced turf damage
  • Industrial tread (R4)—provides good traction and spreads tractor's weight over a large area for good flotation and reduced turf damage

NOTE:

1) Front and rear tread dimensions are finely matched to keep tires from running on the rows and damaging crops. See dimensions information for tread dimensions.
2) Tire dimension will vary slightly due to manufacturing tolerances.
3) Tire dimensions will increase slightly with tire age.
The front tires run slightly faster that the rear tires when in four-wheel drive (4WD). Front and rear tire options available from the factory will maintain the correct ratio (over speed).

26x12-12 (4PR, R4 Industrial, 1 Position) Rear Wheels & Tires - LVB25847
Turf tread (R3)Turf tread (R3)
Industrial tread (R4)Industrial tread (R4)

Tire tread applications:

  • All front wheels and tires on the 1023E, 1025R, and 1026R Tractors (industrial and turf) are one (1) position wheels. Front wheels should never be put in widest position
  • Turf tread (R3)—spreads tractor's weight over a large area for improved flotation and reduced turf damage
  • Industrial tread (R4)—provides good traction and spreads tractor's weight over a large area for good flotation and reduced turf damage

NOTE:

1) Front and rear tread dimensions are finely matched to keep tires from running on the rows and damaging crops. See dimensions information for tread dimensions.
2) Tire dimension will vary slightly due to manufacturing tolerances.
3) Tire dimensions will increase slightly with tire age.
The front tires run slightly faster that the rear tires when in four-wheel drive (4WD). Front and rear tire options available from the factory will maintain the correct ratio (over speed).