New 2500E E-Cut™ Hybrid Gas Riding Greens Mower

Riding Greens Mowers
REQUEST A QUOTE
REQUEST A QUOTE
Key Features
  • A proven design that drives the cutting unit with electric reel motors
  • 102 potential leak points eliminated in the reel circuit
  • Reduced sound levels and fuel consumption @ 2250 RPM
  • Greatly reduce triplex ring with exclusive offset cutting units

More Info

Features

Optional weight transfer grass-catcher system transfers clipping weight to frame, rather than to cutting unit

Most golf courses want to mow the greens and collect the grass for a premium cut and even and smooth appearance. The most challenging concern with catching grass with a greens mower is that as the grass catcher fills with material, its weight is transferred to the cutting unit. This problem is multiplied with a riding greens mower because there are three cutting units and grass catchers collecting different amounts of grass, meaning different weights are applied to the three cutting units.

 

If the weight cannot be removed from the grass catchers, the different weights can cause different heights of cut with each cutting unit, leaving poor playing conditions and after-cut appearance. This is especially noticeable through undulations of a green and on the clean-up pass. The grass catchers on the riding greens mowers have been designed for optimum catching efficiency while maintaining a consistent, effective height of cut.

Grass catcher clip (1) and lift arm bracket (2)Grass catcher clip (1) and lift arm bracket (2)

The exclusive John Deere grass catcher transfers approximately two-thirds of the weight to the vehicle's lift arm. This helps maintain a more-consistent cutting height to ensure a uniform cut across all three cutting units.

 

The front grass catchers can be removed and installed with one hand because of an innovative clip system. The clip secures the catcher to an adjustable bracket on the lift arm, transferring weight from the catcher to the lift arm as clippings accumulate in the catcher.

Rear grass catcher (1) and bail system (2)Rear grass catcher (1) and bail system (2)

The rear grass-catcher mounting system simplifies removal and installation of the rear grass catcher and reduces effort.

 

The retaining-bail system for the rear grass catcher also uses the exclusive John Deere design to transfer the weight of the grass catcher to the lift arm.

Rear grass catcherRear grass catcher

The grass catcher can be easily removed, without spilling the clippings, by rotating the grass catcher back toward the front of the machine until the front grass catcher lip is above the cutting unit side plate. Then, simply pull it out to the side. This can be accomplished with the cutting unit in the raised or lowered position.

Grass catcher channelGrass catcher channel

A channel in the cutting unit side frames guides the grass catcher onto the cutting unit. The channel in the castings ensures the grass-catcher lip maintains its relationship with the cutting unit when following undulations, providing for better grass-catching efficiency.

Adjustable top shieldAdjustable top shield

Adjustable cutting-unit top shields also ensure that grass is thrown into the back of the catcher, even as the reel diameter decreases due to wear. The catchers are shaped and vented to allow the air from the reel to escape while retaining the clippings.

Top-shield extension for dry conditionsTop-shield extension for dry conditions

Extensions for the cutting-unit top shields are for use in dry conditions to maximize the flow of dry clippings into the grass catcher. If mowing predominantly in wet-turf conditions, remove the cutting unit shield extensions to reduce buildup and accumulation of clippings on the front of the grass catcher.

48-V alternator powers reel drive motors, requiring no additional batteries on unit
48-V alternator48-V alternator

The reel circuit is powered by a 48-V, 100-amp alternator belt-driven by the engine. The alternator supplies constant power to the reel circuit and only generates the 48 V when the mow system is engaged.

 

Due to this design, no additional batteries are required to drive the reel motors on the 2500E E-Cut™ Hybrid Riding Greens Mower. With traditional electrical mowing systems, the frequency of clip would change as the batteries drained while mowing.

 

A battery pack begins to lose its power immediately when used. But not on the 2500E. Since the 2500E still uses an engine to drive an alternator, the frequency of clip on the first green and the last green are exactly the same, yielding unparalleled quality of cut from start to finish.

 

Plus, you don't have to plug the machine in to charge the batteries once your day of mowing is done. The only limitation on run time with the 2500E is making sure the operator starts the day with a full fuel tank, just like any other gas- or diesel-powered machine on the market today.

 

The alternator only supplies power to the reel circuit. The remainder of the circuits are powered by the same 12-V battery used on the 2500B PrecisionCut™ Riding Greens Mower.

Electric reel drive system eliminates 102 hydraulic leak points, minimizing leak opportunities

Ninety percent of all hydraulic leaks occur in the reel hydraulic circuit, mainly due to the necessity of having flexible hoses extending from the front of the machine for the front reels. These hoses see a lot of flexing during the mowing day as cutting units are raised and lowered. Cutting units also steer and float to follow undulations, increasing fatigue for the reel motor hoses.

The 2500E E-Cut™ Hybrid Riding Greens Mower has eliminated 102 potential leak points by removing all hydraulics from the cutting unit drive circuit.

This has eliminated the following hydraulic components:

  • Reel drive section of hydraulic triple pump
  • Hydraulic reel motors
  • Backlapping valve
  • Hydraulic oil cooler
  • Flexible hoses
  • Fittings
  • Hard lines

Fewer hydraulic components leads to fewer leaks, increasing confidence that the finely manicured turf will not be damaged by hot hydraulic oil spilled onto a playing surface before an important tournament. 

Optional direct mount front grass-catcher system easy to install and remove

The optional direct mount front grass catchers provide the choice of systems to meet the needs on your golf course.

#

The grass catcher is mounted directly to the front cutting unit using a similar design as the SL Walk Greens Mowers.

This provides quick access for the removal and installation of the grass catcher as well as superior ground following and collection due to position of the catcher to the cutting unit.

It is recommended that catchers be emptied after each green during normal and heavy growth times to reduce weight on the cutting unit.

The direct mount grass catchers will fit model year 2009 to current 2500B and 2500E E-Cut Riding Greens Mowers with Quick-Adjust 5 (QA5) cutting units.

Rear grass catcher (1) and bail system (2) Rear grass catcher (1) and bail system (2)

The rear grass-catcher mounting system simplifies removal and installation of the rear grass catcher and reduces effort.

Rear grass catcherRear grass catcher

The grass catcher can be easily removed without spilling the clippings by rotating the grass catcher back toward the front of the machine until the front grass catcher lip is above the cutting unit side plate. Then, simply pull it out to the side. This can be accomplished with the cutting unit in the raised or lowered position.

Adjustable top shieldAdjustable top shield

Adjustable cutting-unit top shields also ensure that grass is thrown into the back of the catcher, even as the reel diameter decreases due to wear. The catchers are shaped and vented to allow the air from the reel to escape while retaining the clippings.

Top-shield extension for dry conditionsTop-shield extension for dry conditions

Extensions for the cutting-unit top shields are for use in dry conditions to maximize the flow of dry clippings into the grass catcher. If mowing predominantly in wet-turf conditions, remove the cutting unit shield extensions to reduce buildup and accumulation of clippings on the front of the grass catcher.

Larger, 63.5-mm (2.5-in.) front grooved disc roller compatible with Fairway Tender Conditioner (FTC) and Greens Tender Conditioner (GTC) attachment for 22 In. (55.9 cm) Quick Adjust 5 reel cutting units
Grooved disc rollerGrooved disc roller

The grooved disc roller can be used with 55.9-cm (22-in.) Quick-Adjust 5 (QA5) cutting units, in combination with the GTC and FTC, to provide additional roller options for fairway, tees, and approach areas.

 

The increased diameter improves the durability over smaller rollers and it features hardened discs for improved wear which retains spring tension for reduced maintenance, making it an ideal roller for fairway, tee, and approach mowing.

Brushless electric reel motors for compact design and optimal efficiency
Reel motorsReel motors

The electric reel motors on the 2500E E-Cut™ Hybrid Riding Greens Mowers are brushless, allowing them to be compact in size, roughly equal to that of today's hydraulic reel motors. The brushless motors are very efficient, leading to years of optimal performance with very minimal maintenance, and sealed for protection from the elements.

 

The motors are bidirectional and variable speed, meaning they can spin forward or reverse and at a range of rotational speeds. The motors spin forward for mowing and scalping operations and backward for verticutting and backlapping operations.

 

A simple switch on the reel switch box controls the direction of rotation, and a rotary dial on the switch box controls the speed of rotation.

 

A poly chain belt connects the motor shaft to the reel and rotates the reel when the cutting units are engaged. The internal components of the motor are epoxy sealed for long life, durability, and protection from the elements.

 

Cutting units are easily removed from the cutting unit motors by loosening the two bolts securing the motor to the cutting unit, turning the motor approximately one-quarter turn, and pulling the motor from the cutting unit. This can be done in a matter of seconds. A tether prevents damage to the wiring harness when the motor is removed.

Reduced sound levels and reduced fuel consumption at 2250 rpm; throttle notch serves as a guide
Throttle notchThrottle notch

The 2500E E-Cut Hybrid Riding Greens Mower is unique because electrical power is used to minimize hydraulic leak opportunities in the reel circuit, but an engine is utilized to ensure optimal performance throughout the day. This presents an opportunity to further enhance machine performance through reduced sound levels and improved fuel savings by running the machine at less-than-full throttle. Scalping and verticutting operations should always be done with the engine at its fullest throttle level.

 

The 2500E E-Cut Hybrid Riding Greens Mower can be effectively run in mow at an engine rpm reduced to 2250 rpm. At this operating rpm, the operator may experience up to a 6-dB(A) reduction in sound on diesel machines and 4 dB(A) on gas machines, compared to operating at full throttle. Keep in mind that decibel-amp is measured on a logarithmic curve, so even a 1-dB(A) sound reduction is substantial.

 

Actual measured sound levels are as follows:

 

 Full engine rpm 2500E Gas 2500E Diesel
 With Greens Tender™ conditioner (GTC) and power brush 80 dB(A) 84 dB(A)
 Without GTC and power brush 80 dB(A) 84 dB(A)

 

 2250 engine rpm 2500E Gas 2500E Diesel
 With GTC and power brush 76 dB(A) 78 dB(A)
 Without GTC and power brush 76 dB(A) 78 dB(A)

 

In addition to the reduced sound levels, you may also experience fuel savings as well. Current studies have shown that, depending on conditions and usage, fuel savings can be as high as 30 percent when running the machine at 2250 rpm as opposed to running at full throttle.

 

To help operators gauge the 2250-rpm level, a throttle notch has been incorporated into the slot for the throttle lever. To approximate 2250 rpm, the bottom edge of the throttle lever should line up with the notch in the throttle lever slot. This will not equate to exactly 2250 rpm, but will get operators close to this level, allowing them to effectively reduce sound levels and decrease fuel consumption during operation.

Quick-Adjust 5 (QA5) 14-blade cutting unit lowers frequency of clip (FOC)
14-blade reel14-blade reel
#

Using the QA5 14-blade cutting unit option on Greens Mowers will lower the FOC and also provide a clean, smooth cut. It can increase the playability of the putting surface and greens speed.

 

FOC is defined as the distance traveled between consecutive cuts. It is how far the machine moves from the time one blade passes across the bedknife until the next blade passes. The lower the FOC, the less distance that is traveled until the next blade passes.

 

There is a point of diminishing returns when it comes to FOC. The less distance the mower travels between consecutive cuts, the more times the same grass blade is going to be impacted by the reel. Too low an FOC can cause bruising of the turf — especially in the overlap from pass to pass.

 

FOC is often used as a measurement of cut quality; however, there are other key factors that attribute to gaining superior quality of cut that are more critical than FOC. The factors that lead to good cut quality are:

 

  • Geometry of the cutting unit
  • Sharpness of reels and bedknife
  • Proper cutting-unit setup (parallel and bedknife-to-reel clearance)
  • Height of cut (HOC) (effective versus bench HOC)
  • Bedknife selection
  • Roller selection for the turf conditions
  • Turf conditions

 

The geometry of John Deere cutting units makes the optimum range for FOC between 0.160 in. (4.064 mm) and 0.190 in. (4.824 mm) for Walk Greens Mowers and 0.044 in. (1.1176 mm) per 1 mph (1.6 km/h) for Riding Greens Mowers. Technology of the QA5 cutting units excel and provide a superior cut and after-cut appearance.

Machines

Minimum FOC
in. (mm) with 14-blade

180 E-Cut™ Walk Greens Mower

0.125 (3.18)

220 E-Cut Walk Greens Mower

0.125 (3.18)

2500B PrecisionCut™ Riding Greens Mower and 2500E E-Cut Riding Greens Mower

0.034 (0.86) per 1 mph (1.6 km/h)

Smooth, quiet gasoline engine
Gas engineGas engine

These mowers feature a 617 cc 21.0 hp* (15.7 kW) engine that is rated at 3600 rpm engine manufacturer gross power tested in accordance with SAE J1995. It has a single fuel tank with a 7..9-gal. (29.9-L) capacity for a productive day of mowing.
 
It features smooth, quiet, and efficient operation:

  • Twin cylinder
  • Overhead valve
  • Full-pressure lubrication

* The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s website for additional information.

Specifications

Engine
Type Liquid-Cooled, Gas
Engine horsepower At 3600 rpm: 15.7 kW
21 hp
Engine Manufacturer Gross Power,Tested in accordance with SAE J1995. The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer?s web site for additional information.
Air cleaner Semi-cyclone, dry-type, dual-stage
Cooling Liquid
Oil filter Full-flow filter
Engine oil capacity 1.7 L
2 U.S. qt
Pressurized lubrication system Standard
Number of cylinders 2-cylinder
Displacement 617 cc
37.7 cu in.
Electrical System
Charging system Flywheel, alternator
Alternator capacity 16 amp
Ignition CDI
Battery type BCI group 40 maintenance free - 12 V
Starter Electric (solenoid shift)
Vehicle Specifications
Wheels and tires Front
18x10.5-10, 2-ply smooth; 20x10-10, 2-ply smooth; or 20x10-10, 2-ply turf treadRear
18x10.5-10, 2-ply smooth; 20x10-10, 2-ply smooth; or 20x10-10, 2-ply turf tread
Brakes Type
Dual: 15.2 cm
6 in.
Single pedal, 2-wheel disc brakes
Mowing speed 0-6.4 km/h
0-4 mph
Transport speed 0-13.7 km/h
0-8.5 mph
Reverse speed 0-4.8 km/h
0-3 mph
Ground clearance with catcher 10.2 cm
4 in.
Fuel tank capacity In a single tank: 29.9 L
7.9 U.S. gal.
Muffler Horizontal discharge below frame
Hydrostatic capacity (total) 28.8 L
7.6 U.S. gal.
Hydrostatic reservoir capacity (only) 20.4 L
5.4 U.S. gal.
Ground drive, reel drive Traction drive
Hydrostatic, 2-pedal controlReel drive
ElectricReel power source
Alternator, 48 V
90 ampReel control
Voltage regulated
Hydraulic filtration 10 micron
Filtration
Mower
Number 3 - Offset design
Size Quick Adjust QA5 floating, standard: 55.9 cm
22 in.
Backlapping Standard on machine, variable adjustment capability
Clip frequency For 14 blade: 0.541 mm/km/h
0.034 in./mph
with 11 blade reel: 0.689 mm/km/h
0.044 in./mph
with 7-blade reel: 1.082 mm/km/h
0.069 in./mph
Front rollers Optional smooth, machine grooved, or spiral: 5.1 cm
2 in.
Reel diameter 12.7 cm
5 in.
Bedknife adjustment Bedknife-to-reel
Height-of-cut 2.0-19.0 mm
0.078-0.75 in.
with front roller: 51 mm
2 in.
or 16-32 mm
0.625-1.25 in.
Number of blades Choice of 7 or 11
Mower lift (1) hydraulic cylinder for front two units, (1) hydraulic cylinder for center unit
Operator Controls
Steering Hydraulic, adjustable column
Reel lift Right hand (optional foot controls)
Throttle Right hand
Park brake Right foot
Reel drive Right hand
Glow plug switch and indicator light
Hydrostatic speed Forward
Right footReverse
Right foot
Ignition Key start and shutoff
Instrumentation
Engine oil pressure LED Warning light
Alternator LED Warning Light
Hydraulic oil temperature LED Warning Light
Engine coolant temperature LED Warning Light
Hourmeter Digital
Electrical and Safety System
Diagnostics On-board diagnostics with White Box Controller and (SOS) Sit on Seat Diagnostics
Safety interlocks Operator presence switch (in seat), backlap switch, mow/transport switch, park brake set switch
Certification
Number ANSI B71.4-2004
ROPS 2-Post SAE J21294 Roll Over Protection Structure with Seat Belts meets pending ISO 21299 standards
Engine Meets CARB and EPA
Weights and Dimensions
Wheelbase 129.5 cm
51 in.
Tread width 101.5 cm
40 in.
Mowing position width 157.5 cm
62 in.
Turning radius uncut circle 45.7 cm
18 in.
Weight (full fluids, no operator or fuel) 581 kg
1281 lb
Sound Levels at Operator Ear
Full engine rpm 80 dBA
Reduced engine rpm (2250) 76 dBA

Accessories and Attachments

Bedknives

Bedknife, 4.8mm Fairway - ET17532

For the 3225C and the 3235C equipped with seven-blade standard cutting units, ET17533 will be shipped as the standard 22-in. bedknife.

 

For the 3225C and 3235C equipped with ESP™ cutting units, ET17751 (minimum height of cut is 12 mm) will be shipped as the standard bedknife for the five-blade and eight-blade cutting units. The 10-blade cutting unit will be shipped with MT1928 (minimum height of cut is 9.5 mm) low-cut fairway bedknife.

 

Following are all the bedknife options available for lightweight fairway mower cutting units:

Bedknife, 2.0mm Ultra Low Cut - MT7351
BedknivesBedknives

Choice of four bedknives to meet the need for quality cuts to as low as 5/64 in. (2 mm).

Bedknife, 2.5mm Tournament - ET17534

For the 3225C and the 3235C equipped with seven-blade standard cutting units, ET17533 will be shipped as the standard 22-in. bedknife.

 

For the 3225C and 3235C equipped with ESP™ cutting units, ET17751 (minimum height of cut is 12 mm) will be shipped as the standard bedknife for the five-blade and eight-blade cutting units. The 10-blade cutting unit will be shipped with MT1928 (minimum height of cut is 9.5 mm) low-cut fairway bedknife.

 

Following are all the bedknife options available for lightweight fairway mower cutting units:

Bedknife, 3.2 mm - ET17533

For the 3225C and the 3235C equipped with seven-blade standard cutting units, ET17533 will be shipped as the standard 22-in. bedknife.

 

For the 3225C and 3235C equipped with ESP™ cutting units, ET17751 (minimum height of cut is 12 mm) will be shipped as the standard bedknife for the five-blade and eight-blade cutting units. The 10-blade cutting unit will be shipped with MT1928 (minimum height of cut is 9.5 mm) low-cut fairway bedknife.

 

Following are all the bedknife options available for lightweight fairway mower cutting units:

Bedknife, 3.2 mm with Hardened Insert - ET11066

For the 3225C and the 3235C equipped with seven-blade standard cutting units, ET17533 will be shipped as the standard 22-in. bedknife.

 

For the 3225C and 3235C equipped with ESP™ cutting units, ET17751 (minimum height of cut is 12 mm) will be shipped as the standard bedknife for the five-blade and eight-blade cutting units. The 10-blade cutting unit will be shipped with MT1928 (minimum height of cut is 9.5 mm) low-cut fairway bedknife.

 

Following are all the bedknife options available for lightweight fairway mower cutting units:

Bedknife, Hi-cut Fairway 7.6 mm - ET17767

For the 3225C and the 3235C equipped with seven-blade standard cutting units, ET17533 will be shipped as the standard 22-in. bedknife.

 

For the 3225C and 3235C equipped with ESP™ cutting units, ET17751 (minimum height of cut is 12 mm) will be shipped as the standard bedknife for the five-blade and eight-blade cutting units. The 10-blade cutting unit will be shipped with MT1928 (minimum height of cut is 9.5 mm) low-cut fairway bedknife.

 

Following are all the bedknife options available for lightweight fairway mower cutting units:

Cutting Units

(1) QA5 22 In. Vertical Cutting Unit With Front Roller Less Motor - BM25129
(1) QA5 Eleven Blade 22 In. Cutting Unit w/Adjustable 2.0 mm Bedknife, Less Front and Rear Roller & Motor - BM25128
(1) QA5 Seven Blade 22 In. Heavy Section Blade Cutting Unit With Adjustable 4.8 mm Bedknife, Less Yokes, Front and Rear Roller & Motor - BM25127
(1) Quick Adjust 5 (QA5) Fourteen Blade 22 In. (55.9 cm) Cutting Units with Adjustable 2.0mm Bedknife - BM25338

Miscellaneous

(1) 22 In. Fairway Tender Conditioners (FTC) Shaft and Blades - BM22671
(1) 22 In. Front Rotary Turf Brush - BM22761
(1) 22 In. Greens Tender Conditioner (GTC) Shaft and Blades - BM22471
(1) 22 In. Rear Roller Power Brush  - BM22668
(1) 22 In. Smooth Roller Scraper  - BM22995
(1) GTC/FTC Gear Drive - BM22469

The rotary brush and GTC are powered by an external gear-drive attachment:

  • Gear-drive design allows the GTC to be turned off or on, a unique feature belt-drive designs cannot offer.
  • The gear-drive attachment adjusts the rotary brush or GTC to 1/32 in. (0.8 mm) below cut for more aggressive grooming or 7/32 in. (5.6 mm) above cut easily without tools.
  • The attachment can easily be raised or lowered into or out of the working position without any tools.
(1) QA5 22 In. Front Rotary DT Brush - BM24730
(1) QA5 Grass Catcher Lip Extension - BM23910
(1) Rear Roller Power Brush Drive - BM22527
(3) 22 Inch Cutting Unit Rear Attaching Point Yoke Kit for FAIRWAYS - BTC10122
Rear attaching yokeRear attaching yoke
#

Low weight and compaction of a riding greens mower with the mowing system of a fairway mower equals great quality of cut in fairways and surrounds.

 

Many golf courses want to mow their fairways and other areas with riding greens mowers as a way to decrease compaction of the turf. However, the front-attaching-point yoke system used for greens is not the ideal solution for other areas due to the mowing speed, and the terrain is not as smooth as a green.

The 22-in. (55.88-cm) cutting unit rear-attaching-point yoke kit attaches to the rear cutting unit to help keep the rear roller on the ground consistently in undulating terrain. This also substantially improves cut quality by maintaining a consistent height of cut in virtually any condition. Rather than pushing the cutting unit through the turf, the yoke system pulls the cutting unit through the turf keeping the back end of the cutting unit engaged with the turf.

2"x 22" Machine Grooved Roller Scraper - TCA19547
3"X22" GROOVE ROLLER SCRAPER - BM23002
Arm Rest Kit (Includes One Arm Rest and Hardware) - AMT2477
Cutting Unit Top Shield Extension (Set of 3) - BM23080
Cutting Unit Yokes Kit (22") for MY1998-2008 - TCB11356
Cutting Unit Yokes Kit for MY 2009 – Current or QA5 Cutting Units - TCB11341
Dew Whip with end support bracket - BTC10686
Direct Mount Cutting Unit Yoke Kit for MY 2009 – Current or QA5 Cutting Units - BTC10655
Direct Mount Front Grass Catcher - BTC10726
Direct Mount QA5 Grass Catcher Brackets - BM24900
Grass Catcher Mounting Kit - TCB11721
Grass Catcher with large paddle clip (22 Low Profile) - BTC10718
Height of Cut Gauge Bar - AMT2978
Leak Detector Kit - TCB11165
Hydraulic oil leak detection kitHydraulic oil leak detection kit

Kit includes parts needed to install a hydraulic oil leak detector for those desiring additional insurance against potential turf damage.

 

This kit will fit either gas or diesel 2500B Tri-Plex Greens Mowers and will alert the operator with both an audible alarm and a visual warning light in the event a hydraulic oil leak is detected.

Light Kit, Front - BM19746
Light Kit, Rear Grass Catcher - BM19852

Includes one halogen beam working light for early-morning or late-evening operation.

QA5 Grass Catcher Side Plate Insert - BM24199
Rear Grass Catcher Bail Kit - BTC10407
Rear Grass Catcher with Handles - BTC10408
Third Wheel Assist Kit (Parallel Circuit) - TCB11167

For increased traction in adverse, wet, or sloped mowing areas.

 

Third-wheel assist is automatically engaged when the PTO switch is pulled to the on position to engage the mow circuit. This also automatically reduces forward speed to 4 mph (6.4 km/h).

Tires and Wheels (18x10.50-10), (3) Smooth Floatation - BM19750
Tires and Wheels (20x10.00-10), (3) Ballon Rounded Edge Smooth 4 Ply-Rated - BTC10841
Tires and Wheels (20x10.00-10), (3) Smooth - BM19748
Tires and Wheels (20x10.00-10), (3) Smooth 4 Ply-Rated - BTC10071
Tires and Wheels (20x10.00-10), (3) Turf Guard Traction - BM19749
Weight Transfer Grass Catcher Mounting Kit - BTC10914

Reel Cutting Unit Counter Weights

(1) Cutting Unit ONLY Counter Weight Kit - BM22762
(1) QA5 Cutting Unit Brush Only Counter Weight Kit - BM22705
(1) QA5 FTC/GTC ONLY Counter Weight Kit - BM22704

Rollers

(1) 22 In. 2 In. (5 cm) Diameter Machined Grooved Solid Front Roller - BE23416
Grooved front rollersGrooved front rollers

Grooved front rollers maintain height of cut while allowing superintendent to experience a better quality of cut versus a smooth roller.

(1) 22 In. 2 In. (5cm) MT Grooved  Roller - BTC10267
(1) 22 In. 3 In. (7.6 cm) Diameter Heavy Duty Grooved Disc Front Roller - BM25317
(1) 22 In. 3 In. (7.6 cm) Diameter Spiral Grooved Front Roller With Spiral End Caps - BM19817
Spiral-grooved front rollerSpiral-grooved front roller

The 3-in. (7.6-cm) diameter spiral-grooved rollers with spiral endcaps should be used with seven-blade heavy-section cutting units for mowing tees, collars, approaches, or fairways.

 

The height-of-cut range with these rollers is 5/8 in. to 1-1/4 in. (16 mm to 32 mm). Using the 3-in. (7.6-cm) diameter spiral-grooved rollers with spiral endcaps for a height of cut greater than 3/4 in. (19 mm) requires changing the height-of-cut bolt on the rear adjusters to M10 x 70.

 

NOTE: These rollers should not be used for greens mowing.

(1) 2X22" MT SPIRAL Roller - BM23566