New AutoTrac™ AutoTrac™ Activation

AutoTrac
REQUEST A QUOTE
REQUEST A QUOTE
Key Features
  • Make long days easier with equipment and technology that works together for you.
  • Increase productivity by being able to cover more ground.
  • Reduce overlap and maximize inputs.
  • Reduce fatigue and improve operator experience 

More Info

Features

Use many tracking options for any field
AutoTrac™ steering system allows operators to use tramline management more effectively, minimizing soil compaction. Additionally, AutoTrac allows the machine operator to select from a variety of guidance modes including straight track, AB curves, adaptive curves, circle track, and swap track. These tracking options allow the operator to select the track best suited for the field and conditions reducing the number of passes needed to cover the field.
Curve track
Curve trackCurve track
#

The curve track mode helps operators by automatically steering curved guidance lines on terrain that does not allow for straight track to be used (rolling hills or contours).
 
When running with curve track, keep in mind these basic principles:

  • Straight track is more accurate than curve track.
  • A machine with an integrated AutoTrac steering kit is more accurate than a machine with the AutoTrac Universal (ATU) steering kit.
  • Slower speeds are more accurate than faster speeds.
  • Gentle curves are more accurate than tight turn radius curves.
The curve adapts, if driven around an obstacleThe curve adapts, if driven around an obstacle
The curvature of the line changes down the fieldThe curvature of the line changes down the field

A/B curve track 

 

This track allows the operator to set a curved line in a field with two end points (A and B) and will generate guidance lines parallel to the initial track in either direction.

Skip passSkip pass
#
The line stays the same across the field, and an operator can use skip track.
Field obstaclesField obstacles
#
Even if an operator drives around an obstacle in the field, the next pass follows the original track line.
Straight track
Subsequent passes are identical to the first passSubsequent passes are identical to the first pass
#

The straight track mode helps operators by automatically driving straight. Operators can create an initial straight line using a variety of different setup options.

 

Once the track has been defined, all subsequent track lines in the field are created parallel to each other at the defined track spacing distance.

Follow track mode reduces compaction
Active Implement Guidance™ uses the follow track modeActive Implement Guidance™ uses the follow track mode
#

Unique to John Deere Active Implement Guidance, the follow track mode assists the driver when operating headlands or navigating around obstacles, allowing the implement to follow the tractor guidance path. This helps reduce crop damage and soil compaction.

Types of curves
Simple curve

S-curve

Boxed

Racetrack

Spiral

Circle

 

Two different modes can be used depending on the type of curves that need to be created: adaptive curves or A/B curves.

 

Adaptive curve track

 

This track allows the operator to record a manually driven curved guidance line. Operators using a GreenStar™ 3 (GS3) 2630 Display have the ability to record and utilize multiple adaptive curves per field. This feature is especially useful as operators maneuver around terraces or irregular, constantly changing fields. Adaptive curve mode also has the ability to connect line segments when documentation is selected as the recording source. Self-propelled forage harvester or combine operators may find this functionality useful if they need to quickly raise their header for any reason.

Manual circles with Parallel Tracking™t guidance systemt
Circle track mode on the displayCircle track mode on the display
#

The circle track mode helps operators drive concentric circles in a field when a circle is set up and guidance is being used. Operators can create an initial circle using a variety of different methods. Once the initial circle has been defined, all the subsequent circles in the field are created.

 

Circle track is available in Parallel Tracking mode. Pivot Pro activation must be purchased to use circle track with automatic guidance.

Concentric circles with Pivot Pro
Pivot Pro tracking modePivot Pro tracking mode
#

The Pivot Pro module allows the operator to automatically guide a machine in defined concentric circles in fields with center-pivot irrigation systems.

 

Circle track functionality is included with GreenStar Basics, allowing the operator to manually guide the machine around the concentric circle without an upgrade activation. Pair Pivot Pro activation with GreenStar AutoTrac to have the machine drive circles automatically.

 

Pivot Pro is approved for level fields, as accuracy can be degraded as slope increases. If there is slope in the field, there is the potential the circle track space and the center-pivot tower track will not match up. Keep in mind, AutoTrac draws the circle spacing as if the plane were level.

Tramline management
Tramline screenTramline screen
#

Tramline management provides the opportunity to setup and edit certain guidance lines as tramlines. Those lines will be highlighted in a separate color in the guidance screen. Tramline management is available on the GS3 2630 Display in straight track, AB curve, and circle track modes.

Tramlines can be set and stored for each A-B line in the display. This allows the operator to properly seed and plant fields with accurate tramlines defined. This will make it easier to reduce inputs on all following field operations such as spraying.

NOTE: Tramline management is not currently available on the GS3 CommandCenter™ controls.

Swap track
 
Swap track provides operators the ability to quickly switch guidance modes as they work through fields varying geographic conditions. Operators can easily move from straight track to any of the other tracking modes as needed. Swap track allows the operator to toggle between up to four different guidance lines within the same field on the GS3 2630 Display. Operators can also change the track order while AutoTrac is engaged.
 
Swap track is available on the GS3 2630 Display.
 
NOTE: Swap track is not available on the GS3 CommandCenter.

Reduce operator fatigue and time spent in each field

AutoTrac™ assisted steering system greatly increases operator productivity by maintaining consistent accuracy and efficiency. Operators remain more alert while they are in the field and are able to focus on implement settings and varying field conditions. AutoTrac also allows operators to confidently create evenly spaced rows past sunset, as well as in rain, dust, or fog.

AutoTrac increases productivityAutoTrac increases productivity

AutoTrac allows the operator to maintain the optimal working speed for a specific application. This helps maintain peak machine and implement performance, resulting in a uniform field. Consistent speed also allows for more acres to be covered in a day for those applications that require higher speeds, like spraying.

 

AutoTrac also improves operator comfort as the operator has time to concentrate on implement tasks.

Reduce soil compaction and passes
Reduce compaction with AutoTracReduce compaction with AutoTrac

As tractors and field equipment become larger and heavier, there is a growing concern about soil compaction. Heavy equipment and tillage implements can cause damage to the soil structure. Soil structure is important because it determines the ability of a soil to hold and conduct water, nutrients, and air necessary for plant root activity.

 

By using AutoTrac™ steering system, operators can optimize the number of passes and reduce compaction. Additionally, the operator can confine traffic between certain rows and avoid compacting the row area.

 

AutoTrac allows producers to use the same traffic lanes year after year, sacrificing a small portion of the field in favor of having no wheel traffic in the majority of the field. Restricting traffic to specific lanes also provides a firm soil surface for more efficient tractor operation.

 

Without using AutoTrac during field operations, there is tendency for passes to overlap. Each pass over a field under poor conditions can cause significant damage to the soil.

Choose from a variety of steering system options
AutoTrac™ steering kits on new tractorsAutoTrac™ steering kits on new tractors
AutoTrac Universal for older and non-John Deere machinesAutoTrac Universal for older and non-John Deere machines

When paired with a StarFire™ Receiver and GreenStar™ Display, the machine steering kit completes the components that automatically steer the machine. Regardless of the steering kit, the receiver and display help standardize the operating experience between various machines in the operation. This reduces the learning curve for new operators and makes it easier for the operator to focus on total machine optimization.

 

Three different options are available:

  • Integrated steering kit
  • AutoTrac Universal steering kit
  • AutoTrac Controller steering kit

AutoTrac – Integrated steering kit

The integrated steering kit is tied directly into the steering system on the machine and therefore provides optimum accuracy.

  • Integrated – for a clean look in the machine
  • Recent John Deere machines
  • Team John Deere precision with John Deere machines for the highest level of performance, acquisition and accuracy

AutoTrac Universal

A universal system does not integrate into the existing steering system and can be moved between machines.

  • Universal system can easily be moved between machines
  • John Deere and non-John Deere machines
  • Good acquisition and line accuracy

AutoTrac Controller

AutoTrac Controller is a field-installed, integrated AutoTrac system that is available on older John Deere and non-John Deere tractors.

  • Integrated
  • Older John Deere and non-John Deere tractors
  • Enjoy an uncluttered cab
  • Increased performance over a universal system
Integrated AutoTrac kits are available factory installed on the following John Deere machines:
  • 6R Series Tractors with mechanical front-wheel drive (MFWD)
  • 7R Series Small-frame Tractors with MFWD
    • In base, no deduct option
  • 7R Series Large-frame Tractors with MFWD
    • In base, no deduct option
  • 8R Series Tractors with MFWD or tracks
    • In base, no deduct option
  • 9R Ag and Scraper Series Tractors with tracks or wheel
  • 4630 / 4730 / 4830 / 4 Series Sprayers
    • In base, no deduct option
  • S-Series and T-Series Combine
    • In base, no deduct option
  • 7080 Series Self-Propelled Forage Harvester
  • W200 Series Self-Propelled Windrower
    • In base, no deduct option
  • 7760 / 7660 Cotton Pickers
    • In base, no deduct option
  • 3520T Sugarcane Harvesters
    • In base, no deduct
Integrated kits are available for field installation on the following John Deere machines:
  • 6420 / 6030 / 6R Premium Series Tractors with MFWD
  • Small-frame 7020 / 7030 Premium Series Tractors with MFWD
  • Large-frame 7020 / 7030 Series Tractors with MFWD
  • 8000 / 8010 / 8020 Series Tractors with MFWD or tracks
  • 9000 / 9020 Series Tractors with tracks or wheel
  • 9030 Wheeled Special Series Tractors (Not compatible with 9030 Track Special Series Tractors)
  • 9R / 9RT Scraper Series Tractors
  • 4700 / 4710 / 4720 / 4920 / 4730 / 4830 Series Sprayers
  • 9050 / 9060 / 9070 Series Combines
  • 7000 / 7050 / 7080 Series Self-Propelled Forage Harvesters
Customize accuracy and repeatability to meet the needs of an operation

The StarFire™ 6000 Receiver offers multiple differential correction signal levels to match receiver performance with the needs of the operation.

StarFire 6000 horizontal pass-to-pass accuracy:
  • SF1: +/- 15 cm (5.9 in.)
  • SF3: +/- 3 cm (1.2 in.)
  • Radio RTK: +/- 2.5 cm (1.0 in.)
  • Mobile RTK: +/- 2.5 cm (1.0 in.)
StarFire 6000 pass-to-pass accuracyStarFire 6000 pass-to-pass accuracy

NOTE: Horizontal pass-to-pass accuracy specifications are 1D and are based upon a 15-minute time period, 95 percent confidence interval, clear view of the sky, no signal interference, no scintillation, and ideal atmospheric conditions (free from solar disturbances and other ionospheric/tropospheric activity). Performance may vary based on GNSS constellation health.

 

NOTE: Radio RTK horizontal accuracy specification is based on the maximum supported baseline (distance from the RTK base station) of 20 km (12 miles) and a properly installed RTK base station.

 

NOTE: Mobile RTK horizontal accuracy specification is based on a 20-km (12-mile) baseline (distance from the nearest network RTK base station). Performance will vary based on network geometry.

What does pass-to-pass accuracy really mean for the user?

Pass-to-pass accuracy defines how accurate the receiver is at calculating its position over a relatively short (15-minute) time window. For each point in time during that 15-minute window, a pass-to-pass error value is calculated based on the difference between the desired track spacing at the receiver and the actual track spacing based on the receiver’s calculated position. The error values for the entire 15-minute period are combined and the pass-to-pass accuracy value is defined as the 95 percent confidence interval of the data set, meaning 95 percent of the error values are less than or equal to the specification.

 

Pass-to-pass accuracy is measured at the receiver and does not take into account additional error sources such as AutoTrac™ control system error, ground conditions, or implement drift.

Pass-to-pass accuracyPass-to-pass accuracy

Pass-to-pass accuracy has a direct impact on guess-row spacing during jobs like planting, strip till, or fertilizer application, which can have a direct impact on yield potential. Guess-row spacing is also critical for operational efficiency and reducing crop damage in operations that mix implements of various widths.

What does repeatability really mean for the operator?

Repeatability defines how accurately the receiver can calculate its position over a relatively long time window. Repeatability is measured at the receiver and does not take into account additional error sources such as AutoTrac control system error, ground conditions, or implement drift.

 

In-season repeatability is critical when using AutoTrac for multiple jobs throughout the growing season. One example would be creating AutoTrac guidance lines during planting, then using those same guidance lines to complete subsequent jobs such as side-dressing fertilizer, post-emerge spraying, and harvesting.

 

Long-term repeatability is critical when mapping interior and exterior boundaries for later use as input to John Deere Section Control on planters, sprayers, and fertilizer applicators. Long-term repeatability is also critical for growers that use the same AutoTrac guidance lines over multiple seasons for operations like subsurface-drip irrigation, controlled traffic, or alternating planter spacing between the rows from a previous season.

Guess-row spacingGuess-row spacing

Pass-to-pass accuracy also has a direct impact on the amount of skip or overlap that occurs during operations like spraying, fertilizer spreading, or conventional tillage, which has a direct impact on yield potential and input costs.

Skip/overlapSkip/overlap

Country

SF3 In-season repeatability modeling verified?

Notes

Canada

Yes (see notes)

Western portion of British Columbia is not verified due to proximity to a tectonic plate boundary

United States

Yes (see notes)

Locations not verified include Alaska, California, Hawaii, Oregon, and Washington due to the random nature of tectonic plate movement in those areas

StarFire 6000 repeatability:
  • SF1: no repeatability, position drifts over time
  • SF3: +/- 3 cm (1.2 in.) in-season repeatability (where applicable)
  • Radio RTK: +/- 2.5 cm (1.0 in.) long-term repeatability
  • Mobile RTK: +/- 2.5 cm (1.0 in.) long-term repeatability (where applicable)

NOTE: Repeatability specifications are based on a 95 percent confidence interval, clear view of the sky, no signal interference, no scintillation, and ideal atmospheric conditions (free from solar disturbances and other ionospheric/tropospheric activity). Performance may vary based on GNSS constellation health.

 

NOTE: Radio RTK repeatability specifications are based on a properly installed RTK base station and a base station position that has not been modified after initial setup.

 

NOTE: Mobile RTK repeatability may be impacted by updates to network reference frames or adjustments for tectonic plate movement. Networks in some areas of California, Oregon, and Washington will be updated more frequently due to tectonic plate movement.

 

NOTE: SF3 repeatability specifications have been validated through at least a 9-month period. A guidance-line shift may or may not be required after a period longer than 9 months. SF3 repeatability claims are only valid after the receiver has completed a full pull in and is operating at 100 percent accuracy. SF3 repeatability may be impacted by large unpredictable geological events such as earthquakes.

 

NOTE: SF3 repeatability performance may vary in the locations marked No in the table below due to the unpredictable nature of local tectonic plate movement or lack of historical data to verify SF3 tectonic plate models. The StarFire 6000/SF3 system will still apply repeatability modeling and attempt to correct for tectonic plate drift in these areas unless the receiver is located very close to a tectonic plate border, but performance may vary by location:

 

GreenStar™ 3 2630 Display: Increase profitability and reduce overlap
AutoTrac reduces overlapAutoTrac reduces overlap
AutoTrac maintains speedAutoTrac maintains speed

Farming requires multiple passes. This requires a method of guidance with a high degree of repeatability in order to minimize overlap (extra cost of seed, fertilizer, chemical and machine hours) and skips (loss of production).

 

Maintaining repeatable accuracy is important in all operations, especially with cropping practices that require multiple passes through the field. AutoTrac creates more consistent row spacing, reducing the potential for crop damage with subsequent passes through the field.

 

University studies have shown that operators tend to overlap 5 to 13 percent over the course of an entire day, which could mean up to 60 cm (23 in.) of overlap with a 6 m (19 ft) tillage implement. This means that a producer with 300 ha (740 acres) actually works and pays for 330 ha (815 acres).

 

With reducing overlap by using AutoTrac more ground is covered in the same time and inputs like chemicals, fertilizer, fuel, labor and machine hours are reduced.

Reduced overlap with AutoTrac

Field 1

4.72 percent

Field 2

8.03 percent

Field 3

12.74 percent

Average:

8.50 percent

GPS accuracy versus manual accuracy

Accessories and Attachments

AutoTrac Integrated Machine Kits

AutoTrac Combine Machine Kit - 50 Series (PIN 695101 and Above) - PF90876

Machines must be GreenStar™ ready to be compatible with the AutoTrac machine kits. AutoTrac machine kits include the appropriate machine steering controller when necessary and AutoTrac-ready accessories. Display, receiver, and software to complete system sold separately.

AutoTrac Combine Machine Kit - 60 Series - PF90875

Machines must be GreenStar™ ready to be compatible with the AutoTrac machine kits. AutoTrac machine kits include the appropriate machine steering controller when necessary and AutoTrac-ready accessories. Display, receiver, and software to complete system sold separately.

AutoTrac Electrical Connector Assembly - 7020 or 7015 Models - PF90495
AutoTrac Sprayer Machine Kit - 4720 Models - PF90808
AutoTrac sprayer vehicle kit for 4720 modelsAutoTrac sprayer vehicle kit for 4720 models
AutoTrac Sprayer Machine Kit - 4920 Models (PIN 003999 and Below) - PF90811
AutoTrac Tractor King Pin Kit - 6105R, 6115R, 6125R or 6130R (IT4) Models with MFWD - BPF10616

AutoTrac field-installed kits are now available for 6105R, 6115R, 6125R, 6140R, or 6150R MFWD Tractors.

 

These field-installed kits are an integrated guidance solution for John Deere 6R MFWD Tractors and are compatible with the GreenStar™ 3 or GreenStar 2 system components.

 

These kits contain all of the required hydraulic components and harnesses for field installation.

 

GreenStar display options:

  • GreenStar 3 (GS3) 2630 and CommandCenter™ 
    • AutoTrac activation for GS3
  • GreenStar 2 (GS2) 1800
    • AutoTrac activation for GS2

StarFire™ Receiver and signal options:

  • StarFire 3000
    • SF1, SF2 activation, or RTK
AutoTrac Tractor King Pin Kit - 6140R or 6150R Models with MFWD - BPF10560

AutoTrac field-installed kits are now available for 6105R, 6115R, 6125R, 6140R, or 6150R MFWD Tractors.

 

These field-installed kits are an integrated guidance solution for John Deere 6R MFWD Tractors and are compatible with the GreenStar™ 3 or GreenStar 2 system components.

 

These kits contain all of the required hydraulic components and harnesses for field installation.

 

GreenStar display options:

  • GreenStar 3 (GS3) 2630 and CommandCenter™ 
    • AutoTrac activation for GS3
  • GreenStar 2 (GS2) 1800
    • AutoTrac activation for GS2

StarFire™ Receiver and signal options:

  • StarFire 3000
    • SF1, SF2 activation, or RTK
AutoTrac Tractor Machine Kit - 6105R, 6115R, or 6125R Models with MFWD - BPF10513

AutoTrac field-installed kits are now available for 6105R, 6115R, 6125R, 6140R, or 6150R MFWD Tractors.

 

These field-installed kits are an integrated guidance solution for John Deere 6R MFWD Tractors and are compatible with the GreenStar™ 3 or GreenStar 2 system components.

 

These kits contain all of the required hydraulic components and harnesses for field installation.

 

GreenStar display options:

  • GreenStar 3 (GS3) 2630 and CommandCenter™ 
    • AutoTrac activation for GS3
  • GreenStar 2 (GS2) 1800
    • AutoTrac activation for GS2

StarFire™ Receiver and signal options:

  • StarFire 3000
    • SF1, SF2 activation, or RTK
AutoTrac Tractor Machine Kit - 6130R (FT4), 6120R, 6110R models with MFWD - BPF10989
AutoTrac Tractor Machine Kit - 6135R model with MFWD - BPF10987
AutoTrac Tractor Machine Kit - 6140R or 6150R Models with MFWD - BPF10387

AutoTrac field-installed kits are now available for 6105R, 6115R, 6125R, 6140R, or 6150R MFWD Tractors.

 

These field-installed kits are an integrated guidance solution for John Deere 6R MFWD Tractors and are compatible with the GreenStar™ 3 or GreenStar 2 system components.

 

These kits contain all of the required hydraulic components and harnesses for field installation.

 

GreenStar display options:

  • GreenStar 3 (GS3) 2630 and CommandCenter™ 
    • AutoTrac activation for GS3
  • GreenStar 2 (GS2) 1800
    • AutoTrac activation for GS2

StarFire™ Receiver and signal options:

  • StarFire 3000
    • SF1, SF2 activation, or RTK
AutoTrac Tractor Machine Kit - 6145R, 6155R models with MFWD - BPF10985
AutoTrac Tractor Machine Kit - 6170R, 6190R or 6210R Models with MFWD - BPF10345

AutoTrac field-installed kits are now available for 6210R, 6190R, and 6170R MFWD Tractors.

These field-installed kits are an integrated guidance solution for John Deere 6R MFWD Tractors.

 

All required hydraulic components and harnesses for field installation are contained in these kits.

 

GreenStar™ display options:

  • GreenStar 3 (GS3) 2630 and CommandCenter™ 
    • AutoTrac activation for GS3
  • GreenStar 2 (GS2) 1800
    • AutoTrac activation for GS2

 

StarFire™ Receiver and signal options:

  • StarFire 3000
    • SF1, SF2 activation, or Real Time Kinematic (RTK)
AutoTrac Tractor Machine Kit - 6175R, 6195R and 6215R models with MFWD - BPF10683

The AutoTrac system reduces overlap, saving time, fuel, and labor costs. Whether breaking stubble with tillage equipment, planting or seeding, spraying or fertilizing, it reduces implement overlap by up to 90 percent. It also provides faster headland turns because the AutoTrac system takes the guesswork out of the return path.

AutoTrac Tractor Machine Kit - 6420 Models with MFWD - PF90568
AutoTrac tractor vehicle kit itemsAutoTrac tractor vehicle kit items
More AutoTrac tractor vehicle kit itemsMore AutoTrac tractor vehicle kit items
More AutoTrac tractor vehicle kit itemsMore AutoTrac tractor vehicle kit items
AutoTrac Tractor Machine Kit - 7020 or 7015 Models with MFWD - PF90496

When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™  machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.

 

Key features of the integrated AutoTrac steering kit:

  • Integration, for a clean look in the machine
  • Uses GreenStar components and AutoTrac software
  • Works with the Original, GreenStar 2, or GreenStar 3 systems
  • Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
AutoTrac Tractor Machine Kit - 7220 or 7320 Models with MFWD - PF90569
AutoTrac tractor vehicle kit itemsAutoTrac tractor vehicle kit items
More AutoTrac tractor vehicle kit itemsMore AutoTrac tractor vehicle kit items
More AutoTrac tractor vehicle kit itemsMore AutoTrac tractor vehicle kit items
AutoTrac Tractor Machine Kit - 7420 or 7520 Models with MFWD - PF90570
AutoTrac tractor vehicle kit itemsAutoTrac tractor vehicle kit items
More AutoTrac tractor vehicle kit itemsMore AutoTrac tractor vehicle kit items
AutoTrac Tractor Machine Kit - 7630, 7730, 7830 or 7930 Models with MFWD - PF90894

When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™  machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.

 

Key features of the integrated AutoTrac steering kit:

  • Integration, for a clean look in the machine
  • Uses GreenStar components and AutoTrac software
  • Works with the Original, GreenStar 2, or GreenStar 3 systems
  • Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
AutoTrac Tractor Machine Kit - 7720 or 7820 Models with MFWD and IVT Transmission - PF90891

When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™  machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.

 

Key features of the integrated AutoTrac steering kit:

  • Integration, for a clean look in the machine
  • Uses GreenStar components and AutoTrac software
  • Works with the Original, GreenStar 2, or GreenStar 3 systems
  • Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
AutoTrac Tractor Machine Kit - 7720 or 7820 Models with MFWD and PowrQuad Transmission - PF90893

When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™  machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.

 

Key features of the integrated AutoTrac steering kit:

  • Integration, for a clean look in the machine
  • Uses GreenStar components and AutoTrac software
  • Works with the Original, GreenStar 2, or GreenStar 3 systems
  • Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
AutoTrac Tractor Machine Kit - 7920 Models with MFWD and IVT Transmission - PF90892

When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™  machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.

 

Key features of the integrated AutoTrac steering kit:

  • Integration, for a clean look in the machine
  • Uses GreenStar components and AutoTrac software
  • Works with the Original, GreenStar 2, or GreenStar 3 systems
  • Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
AutoTrac Tractor Machine Kit - 8000 Series with MFWD - PF90863

When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™  machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.

 

Key features of the integrated AutoTrac steering kit:

  • Integration, for a clean look in the machine
  • Uses GreenStar components and AutoTrac software
  • Works with the Original, GreenStar 2, or GreenStar 3 systems
  • Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
AutoTrac Tractor Machine Kit - 8000T Series - PF90396
AutoTrac Tractor Machine Kit - 8020 Series with ILS - PF90861

When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™  machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.

 

Key features of the integrated AutoTrac steering kit:

  • Integration, for a clean look in the machine
  • Uses GreenStar components and AutoTrac software
  • Works with the Original, GreenStar 2, or GreenStar 3 systems
  • Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
AutoTrac Tractor Machine Kit - 8020 Series with MFWD - PF90497

When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™  machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.

 

Key features of the integrated AutoTrac steering kit:

  • Integration, for a clean look in the machine
  • Uses GreenStar components and AutoTrac software
  • Works with the Original, GreenStar 2, or GreenStar 3 systems
  • Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
AutoTrac Tractor Machine Kit - 8030 Series with ILS 40 km/h (PIN 005466 and Below) - PF90818

When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™  machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.

 

Key features of the integrated AutoTrac steering kit:

  • Integration, for a clean look in the machine
  • Uses GreenStar components and AutoTrac software
  • Works with the Original, GreenStar 2, or GreenStar 3 systems
  • Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
AutoTrac Tractor Machine Kit - 8030 Series with ILS 40km/h (PIN 005467 and Above) - PF90820

When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™  machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.

 

Key features of the integrated AutoTrac steering kit:

  • Integration, for a clean look in the machine
  • Uses GreenStar components and AutoTrac software
  • Works with the Original, GreenStar 2, or GreenStar 3 systems
  • Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
AutoTrac Tractor Machine Kit - 8030 Series with MFWD (PIN 005466 and Below) - PF90817

When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™  machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.

 

Key features of the integrated AutoTrac steering kit:

  • Integration, for a clean look in the machine
  • Uses GreenStar components and AutoTrac software
  • Works with the Original, GreenStar 2, or GreenStar 3 systems
  • Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
AutoTrac Tractor Machine Kit - 8030 Series with MFWD (PIN 005467 and Above) - PF90819

When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™  machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.

 

Key features of the integrated AutoTrac steering kit:

  • Integration, for a clean look in the machine
  • Uses GreenStar components and AutoTrac software
  • Works with the Original, GreenStar 2, or GreenStar 3 systems
  • Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
AutoTrac Tractor Machine Kit - 9020 Series Wheel with Steel Gudgeon (PIN 010444 and Above) or 9020 Series Wheel with Cast Gudgeon (All PINs) - PF90671

When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™  machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.

 

Key features of the integrated AutoTrac steering kit:

  • Integration, for a clean look in the machine
  • Uses GreenStar components and AutoTrac software
  • Works with the Original, GreenStar 2, or GreenStar 3 systems
  • Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
AutoTrac Tractor Machine Kit - 9030 Series Wheel Scraper Tractor - PF90849
AutoTrac Tractor Machine Kit - 9R Series Wheel Scraper Tractor - BPF10629

When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™  machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.

 

Key features of the integrated AutoTrac steering kit:

  • Integration, for a clean look in the machine
  • Uses GreenStar components and AutoTrac software
  • Works with the Original, GreenStar 2, or GreenStar 3 systems
  • Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
AutoTrac Tractor Machine Kit - 9RT Series Scraper Tractor - BPF10631

When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™  machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.

 

Key features of the integrated AutoTrac steering kit:

  • Integration, for a clean look in the machine
  • Uses GreenStar components and AutoTrac software
  • Works with the Original, GreenStar 2, or GreenStar 3 systems
  • Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
AutoTrac and GreenStar Ready Field Kit - Hagie Sprayers - BPF11531
SPFH Guidance Base Kit - 7000, 7050 and 7080 Series - BZ100079
AutoTrac SPFH base kit for ProDrive transmissionsAutoTrac SPFH base kit for ProDrive transmissions
SPFH SSU Controller - 7000, 7050 and 7080 Series - BZ100196
AutoTrac SPFH controller for 7000 and 7050 SeriesAutoTrac SPFH controller for 7000 and 7050 Series

AutoTrac RowSense Kits for Mechanical Feelers

AutoTrac RowSense Mechanical Feelers (20 In. Row Spacing) - PF90699
RowSense mechanical feelers (51-cm [20-in.] row spacing)RowSense mechanical feelers (51-cm [20-in.] row spacing)
AutoTrac RowSense Mechanical Feelers (22 In. Row Spacing) - PF90700
RowSense mechanical feelers (56-cm [22-in.] row spacing)RowSense mechanical feelers (56-cm [22-in.] row spacing)
AutoTrac RowSense Mechanical Feelers (30 In. or 75 cm Row Spacing) - PF90697
AutoTrac RowSense Mechanical Feelers (45 cm Row Spacing) - Argentina and Brazil - BPF10266
AutoTrac RowSense Mechanical Feelers (70 cm Row Spacing) - PF90698
RowSense mechanical feelers (70-cm [27.6-in.] row spacing)RowSense mechanical feelers (70-cm [27.6-in.] row spacing)
AutoTrac RowSense Retrofit Kit - Corn Head - PF90757
 RowSense retrofit kit for corn head RowSense retrofit kit for corn head

AutoTrac RowSense Kits for Universal Sensor

AutoTrac RowSense Kit for Universal Sensor - Combine - PF90742
AutoTrac RowSense Universal Sensor - PF91001
Case IH Corn Head Mounting Hardware - 2200/2400/3200/3400 Series 30" - PF90844
Drago Corn Head Mounting Hardware - All Series 30" - PF90977
Geringhoff Corn Head Mounting Hardware - NorthStar or Rota Disc Series 30" - PF90978
John Deere Corn Head Mounting Hardware - 600 Series 30" and 75cm - PF90843
John Deere Corn Head Mounting Hardware - 90 Series 30" (MY1994-2001) - PF91002
John Deere Corn Head Mounting Hardware - 90 Series 30" (MY2002-2007) - PF90794

AutoTrac Universal Supplemental Kits

AutoTrac Universal Guidance Harness Kit - BPF11129
AutoTrac Universal Horn Kit - PF90452
AutoTrac Universal horn kit AutoTrac Universal horn kit
AutoTrac Universal Hub and Anti-Rotation Bracket - PF90560

AutoTrac™ is an assisted hands-free steering system that automatically steers the machine through the fields. For some of the competitive sprayers, an AutoTrac Universal Hub will be required along with other attachments. For complete compatibility information, see the ATU look up tool.

AutoTrac Universal Hub, Anti-Rotation Bracket and Hardware - PF90476

AutoTrac™ is an assisted hands-free steering system that automatically steers the machine through the fields. For some of the competitive sprayers, an AutoTrac Universal Hub will be required along with other attachments. For complete compatibility information, see the ATU look up tool.

AutoTrac Universal Hub, Auto-Rotation Bracket and Horn Switch Kit - PF90565

AutoTrac™ is an assisted hands-free steering system that automatically steers the machine through the fields. For some of the competitive sprayers, an AutoTrac Universal Hub will be required along with other attachments. For complete compatibility information, see the ATU look up tool.

AutoTrac Universal Steering Supplemental Kit - "A" - PF90411
AutoTrac Universal steering supplemental kit -AutoTrac Universal steering supplemental kit -"A"
PF90454Bracket, anti-rotation
PF80864Assembly, GPS bracket
PF12140Hub, spline
Compatible models
Case® IHRow-cropMX Maxxum®100/110/120/135/150/170
New Holland®Row-cropTG210/230/255/285
Case IHTracksQuad375/425/450/500
Case IH4WDSTX®275/325/375/425/450/500
Case IHRow-cropMX Maxxum210/230/255/285
Case IHRow-cropMX Maxxum180/200/220/240/270
New Holland4WDTJ275/325/75/425/450/500
McCormick™Row-cropZTX230/260/280

 

Case, Maxxum, New Holland, and STX are U.S.-registered trademarks of CNH Global N.V. and its subsidiaries. McCormick is a trademark of McCormick International USA Incorporated.

AutoTrac Universal Steering Supplemental Kit - "B" - PF90518
AutoTrac Universal Steering Supplemental Kit - "C" - PF90510
AutoTrac Universal Steering Supplemental Kit - "CB" - BPF11219
AutoTrac Universal Steering Supplemental Kit - "D" - PF90437
Universal steering supplemental kit - Universal steering supplemental kit - "D"
Compatible models
Ag-Chem™SprayerRoGator®1254/1264/1274/1274C
Ag-ChemSprayerTerraGator®6103/8103/9103/9203
Ag-ChemSprayerTerraGator8104/8144
New Holland®/Versatile4WD 9184/9384/9484/9684/9886
GVM®SprayerProwler1149t
New HollandRow crop8x70A8670A/8770A/8870A/8970A
New HollandRow crop8x708670/8770/8870/8970
Buhler™Row cropGenesis2145/2160/2180/2210
New Holland/Versatile4WD 9282/9482/9682/9882
New Holland/Versatile4WD 9280/9480/9680/9880
Buhler4WDVersatile2290/2335/2360/2375/2425
Challenger®TracksMT835/845/855/865/875
ChallengerTracksMT735/745/755/765
CLAAS®TracksCH35/45/55
Case® IHCombineAFX8010
New HollandCombineCR940/960/970/980
New HollandCombineCX840/860/880
New HollandWindrowerHW300/320/340
Hesston®Windrower 9260/9240/9230
HesstonWindrower 8550s/8450/8250s
ChallengerWindrower SP80/SP110/SP165
New Idea®Windrower 5830/5840/5850
Massey Ferguson®Windrower 9220/9420/220

 

Ag-Chem, RoGator, TerraGator, Challenger, Hesston, New Idea, and Massey Ferguson are trademarks of AGCO Corporation. New Holland and Case are trademarks of CNH Global N.V. and its subsidiaries. Buhler is a trademark of Buhler Industries Incorporated. CLAAS is a U.S.-registered trademark of CLAAS KGaA mbH Limited.

AutoTrac Universal Steering Supplemental Kit - "E" - PF90451
Universal steering supplemental kit - Universal steering supplemental kit - "E"

 

 AN278232Harness, assembly, 9986/9996 Cotton (StarFire™ receiver)
 PF80906Harness, two-pin/four-pin (mini terminator)
 PF80722Harness, StarFire to bulkhead
 PF80873Harness, two-pin to convenience outlet
 RE67015Harness, convenience outlet to power strip
 PF90510Bundle, AutoTrac Universal (ATU) supplemental kit - "C"
Compatible models
John DeereCotton Picker9986/9996

 

 

AutoTrac Universal Steering Supplemental Kit - "F" - PF90448
Universal steering supplemental kit - Universal steering supplemental kit - "F"

 

 A PF90510 Bundle, ATU bracket kit "C"
 B AH211594 Support, sssembly, GPS receiver
Not pictured PF80722 Harness, StarFire™ to bulkhead
 C PF80167 Connector plug, StarFire
 D PF80873 Harness, two-pin to convenience outlet
 E RE67015 Harness, convenience outlet to power strip
Compatible models
 John Deere Self-propelled forage harvester 7200/7300/7400/7500/7700/7800
AutoTrac Universal Steering Supplemental Kit - "G" - PF90454
AutoTrac Universal steering supplemental kit, AutoTrac Universal steering supplemental kit, "G"

 

 AN191704 Clamp assembly
 PF12372 Bracket, anti-rotation
Compatible models
McCormick™Row cropZTX230/260/280
Case® IHSprayerSPX™4410
Case IHSprayerFLX™4010/4510
Case IHSprayerFLX3010/3510
AGCO®/Willmar®SprayerEagle8650
McCormickRow cropMTX120/135/150/165/185/200
Case IHRow cropMaxxum®5220/5230/5240/5250
Case IHSprayerSPX3200/4260
Case IHTracksQuad380/430/480/530

 

McCormick is a trademark of McCormick International USA Incorporated. Case, SPX, FLX, and Maxxum are trademarks of CNH Global N.V. and its subsidiaries. AGCO and Willmar are U.S.-registered trademarks of AGCO Corporation.

AutoTrac Universal Steering Supplemental Kit - "H" - PF90455
AutoTrac Universal steering supplemental kit, AutoTrac Universal steering supplemental kit, "H"

 

 A PF12243

 U-Bolt

 B PF12244 Saddle
 C PF12427 Telescope washers
 D PF12442 Bracket extension
Compatible models
Case® IHSprayerSPX™3150/3185/3310
Case IHRow Crop71x0 Magnum®7110/ 7120/7130/7140/7150
Case IHRow Crop72x0 Magnum7210/7220/7230/7240/7250
Case IHRow Crop89x0 Magnum8910/8920/8930/8940/8950

 

Case, SPX, and Magnum are trademarks of CNH Global N.V. and its subsidiaries.

AutoTrac Universal Steering Supplemental Kit - "I" - PF90466
Universal steering supplemental kit - Universal steering supplemental kit - "I"
PF12364Hub, taper spline
PF12415Bracket, anti-rotation
 RE52952Clamp
Compatible models
Ag-Chem™SprayerTerraGator®1603/1803/1903
Ag-ChemSprayerTerraGator1664/1804/1844
CAT®TracksE65/75/85/95
CATTracksD65/75/85
CaterpillarTracksC65/70/75/85
Case® IH4WDSteiger®9310/9330/9350/9370/9380/9390
Case IH4WDSteiger91,92,9x10/9x30/9x50/9x70/9x80/9x90

 

Ag-Chem and TerraGator are trademarks of AGCO Corporation. CAT is a U.S.-registered trademark of Caterpiller Incorporated. Case and Steiger are U.S.-registered trademarks of CNH Global N.V. and its subsidiaries.

AutoTrac Universal Steering Supplemental Kit - "J" - PF90465
Universal steering supplemental kit - Universal steering supplemental kit - "J"
PF12341Hub, taper spline
PF80987Harness, combo power adapter
PF12467Bracket, cab roof (StarFire™)
PF12440Bracket, anti-rotation
PF12441Spacer, anti-rotation
AutoTrac Universal Steering Supplemental Kit - "K" - PF90464
Universal steering supplemental kit - Universal steering supplemental kit - "K"
 PF12339Hub, taper spline
PF12415Bracket, anti-rotation
 RE52952Clamp, band
Compatible models
AGCO®/Willmar®SprayerEagle8400/8450/8500
Case® IHSprayerFLX4275/4300/4330/4375
Case IHSprayerFLX3275/3300/3330
Spra-Coupe®Sprayer4000 Series4450/4650
Spra-CoupeSprayer4000 Series4440/4640

 

AGCO, Willmar, and Spra-Coupe are U.S.-registered trademarks of AGCO Corporation. Case is a U.S.-registered trademark CNH Global N.V. and its subsidiaries.

AutoTrac Universal Steering Supplemental Kit - "L" - PF90468
AutoTrac Universal steering supplemental kit -AutoTrac Universal steering supplemental kit -"L"
PF90510Bundle, ATU supplemental kit "C"
PF80906Harness, two-pin/four-pin (mini terminator)
PF80921Harness, two-pin/four-pin (large terminator)
PF80975Harness, combine, StarFire™ extension
PF80976Harness, combine, GSD Y
PF80722Harness, StarFire to bulkhead
 AH171496Harness, StarFire adapter (metri-pack to Deutsch)
Compatible models

 

 John Deere Combine 9x60 9560/8560 STS™/9660/9660 CTS™/9660 STS/9760 STS/9860 STS/9860 Premium Series 
 John Deere Combine 9x50 9450/9550/9550 SH/9650/9650 CTS/9650 STS/9750 STS
 John Deere Combine 9x00/9x10 9400/9500/9500 SH/9600/CTS/9410/9510/9540 SH/9610/ CTS II
AutoTrac Universal Steering Supplemental Kit - "M" - PF90512
Universal steering supplemental kit - Universal steering supplemental kit - "M"
Compatible models
Caterpillar® Lexion Combine450/465/470/475/485/460R/470R/480R (manufactured in 2002 or later) 560/560R/570R/580R/585R/590R

 

Caterpillar is a U.S.-registered trademark of Caterpillar Incorporated.

AutoTrac Universal Steering Supplemental Kit - "N" - PF90504
Universal steering supplemental kit - Universal steering supplemental kit - "N"
Compatible models
Caterpillar®Lexion Combine450/465/470/475/485/460R/470R/480R (manufactured prior to 2002)

 

Caterpillar is a U.S.-registered trademark of Caterpillar Incorporated.

AutoTrac Universal Steering Supplemental Kit - "O" - PF90544
Universal steering supplemental kit - Universal steering supplemental kit - "O"
Compatible models
John DeereCombine9660 WTS
AutoTrac Universal Steering Supplemental Kit - "P" - PF90470
Universal steering supplemental kit - Universal steering supplemental kit - "P"
Compatible models
John DeereCotton stripper7460




AutoTrac Universal Steering Supplemental Kit - "Q" - PF90548
AutoTrac Universal steering supplemental kit -AutoTrac Universal steering supplemental kit -"Q"
AutoTrac Universal Steering Supplemental Kit - "R" - PF90557
Universal steering supplemental kit - Universal steering supplemental kit - "R"
AutoTrac Universal Steering Supplemental Kit - "S" - PF90608
AutoTrac Universal steering supplemental kit-AutoTrac Universal steering supplemental kit-"S"
Compatible models
John DeereRow-crop tractor6x00
John DeereRow-crop tractor6x10
John DeereRow-crop tractor6x20
John DeereRow-crop tractor6x30 Standard Series
John DeereRow-crop tractor7x00 Small Frame
John DeereRow-crop tractor7x10 Small Frame
John DeereRow-crop tractor7x20 Small Frame
John DeereRow-crop tractor7x30 Small Frame Standard Series
John DeereRow-crop tractor7xx0 HI Crop
AutoTrac Universal Steering Supplemental Kit - "T" - PF90609
AutoTrac Universal steering supplemental kit -AutoTrac Universal steering supplemental kit -"T"
Compatible models
John DeereSprayer4700
John DeereSprayer4x10
John DeereSprayer4x20
John DeereRow-crop tractor8x00
John DeereRow-crop tractor8x10
John DeereRow-crop tractor8x20
John DeereRow-crop tractor8x30
John DeereRow-crop tractor7x20 large frame
John DeereRow-crop tractor7x30 large frame
John Deere4WD tractor9x00
John Deere4WD tractor9x20
John Deere4WD Tractor9x30
AutoTrac Universal Steering Supplemental Kit - "U" - PF90509
Universal steering supplemental kit - Universal steering supplemental kit - "U"
AutoTrac Universal Steering Supplemental Kit - "V" - PF90547
Universal steering supplemental kit - Universal steering supplemental kit - "V"
AutoTrac Universal Steering Supplemental Kit - "W" - PF90890

Device Connectivity

Ethernet Switch - BPF10746
Ethernet switchEthernet switch
#

The Ethernet switch enables connectivity for a GreenStar™ 3 (GS3) 2630 Display and a Generation 4 CommandCenter™ to the modular telematics gateway (MTG) to support MyJohnDeere applications. The Ethernet switch has five M12 Ethernet connectors and one M12 power connector.

GreenStar Brackets

Bracket - GreenStar Dual Display - PF90430
GreenStar dual display bracket GreenStar dual display bracket
Deluxe Shroud Conversion Bracket Kit - 6020 or 6030 Series or Small Frame 7000, 10, 20, or 30 Series Tractors - PF90780
Deluxe Shroud Conversion Bracket Kit - 9000 (MY1990 and Newer), 10, 50, 60 or 70 Series Combines; 7760, 9986 or 9996 Cotton Pickers or 7460 Cotton Strippers - PF91009
Deluxe Shroud Conversion Bracket Kit - Large Frame 7000/8000/9000 Model Tractors or 4700/4800/4900 Model Sprayers. For Series 00, 10, 20 or 30. - PF91010
Deluxe Shroud Conversion Bracket Kit - RTK Base Station/Tripod - PF90781
GreenStar Display Cornerpost Bracket - S-Series Combines - BPF11186
GreenStar Tractor Bracket Bundle - 6B Tractors - BPF11167
GreenStar Tractor Bracket Kit - 9020 Series - PF90409
GreenStar Tractor Bracket Kit - 9020 Wheel or 9020 Track Series - PF90199
GreenStar Tractor Harness Bundle - 6B Tractors - BPF11184
John Deere AutoTrac Controller Bracket - BPF10472
Position Receiver Bracket and Connector Kit - PF90758
Position receiver bracket and connector kitPosition receiver bracket and connector kit
StarFire Receiver Bracket Bundle - BPF11185
StarFire Receiver Bracket Kit - (MY13-MY16) 6M Tractors - BPF11274
StarFire Receiver Deluxe Shroud - PF90739
StarFire Receiver Deluxe shroudStarFire Receiver Deluxe shroud
StarFire Receiver Universal Mounting Bar Kit - BPF11356

GreenStar Implement Control Kits

Active Implement Guidance Counterbalance Valve - BPF10548
Active Implement Guidance External Valve Bracket Kit - BPF10352
Active Implement Guidance Implement Feedback Harness (4 Meter) - BPF10032
Active Implement Guidance Implement Feedback Harness Extension (9 Meter) - BPF10019
Active Implement Guidance Implement Feedback Sensor - BPF10024

Machine specific kits provide dealers with all of the hardware and harnessing to equip your 2410C or 2510H with dry applicator with AccuFlow Vortex Cooler minus:

  • EVA hose
  • Vapor hose
  • Nurse tank hose
  • GreenStar Rate Controller
Active Implement Guidance or iGrade Closed Center Valve - BPF10383
Active Implement Guidance or iGrade External SCV Switch and Harness Kit - BPF10356
Active Implement Guidance or iGrade Open Center Valve - BPF10382
Bracket Assembly - John Deere 2510 Series Applicators - PF90826
CAN Front Extension Harness (12 meter) - PF90553
Front Extension Harness (10 meter) - BPF11284
Front Extension Harness (3 meter) - BPF11285
High Current Power Extension Harness (3 meter) - PF90825
Implement Mast - For universal use on 3", 4", 5" or 6" Frame Tubes - PF90523
Implement Mast - For universal use on 7" or 8" Frame Tubes - PF90524
Implement Mast - John Deere CCS Planter With Refuge Plus Tank (MY2006 and Newer) - PF90549
Implement Mast - John Deere CCS Planter Without Refuge Plus Tank (MY2004 and Newer) - PF90525
Implement Receiver Harness - PF90538
John Deere Application Controller Mounting Hardware - 6R - BPF10940
John Deere Application Controller Mounting Hardware - 7R - BPF10732
John Deere Application Controller Mounting Hardware - 8000, 8010 and 8R Wheeled Series Tractors  - BPF10041
John Deere Application Controller Mounting Hardware - 8000T and 8010T Series Tractors - BPF10020
John Deere Application Controller Mounting Hardware - 8020 Wheeled Series Tractors - BPF10022
John Deere Application Controller Mounting Hardware - 8020T Series Tractors - BPF10021
John Deere Application Controller Mounting Hardware - 8RT Series Tractors - BPF10042
John Deere Application Controller Mounting Hardware - 9000 and 9020 Wheeled and Track Series - BPF10023
John Deere Application Controller Mounting Hardware - 9R with Standard Hydraulics - BPF11173
Power Extension Harness (11 meter) - PF90592
Switch and power extension harnessSwitch and power extension harness
Power Harness - 4WD Tractor - BPF10404
Power Harness - Row Crop Tractor - BPF10403
iGrade Counterbalance Valve - BPF10547
iGrade or Active Implement Guidance Implement CAN Extension Harness - BPF10018
iGrade or Surface Water Pro Receiver Mounting Kit - PF90676
Surface Water Pro receiver mounting kit Surface Water Pro receiver mounting kit

GreenStar Miscellaneous Hardware

GreenStar Lightbar - BPF10028

The GreenStar™ Lightbar is a simple, economical Parallel Tracking™ display.

 

The 27 tracking indicator light-emitting diodes (LED) tell the operator how the machine is tracking in relation to the desired guidance line.

The operator steers the vehicle back to the guidance line.
 
GreenStar Lightbar can be run as a stand-alone unit or as a companion to either an Original GreenStar Display or GreenStar 2 (GS2) 2600, GreenStar 2 1800, or GreenStar 3 2630 Display.
 
NOTE: The GreenStar Lightbar cannot be power washed.

GreenStar/Gen 4 10" Display Touch Panel Protector Service Kit - PF90596

GreenStar and Gen 4 Harnesses

GreenStar Ready Harness Kit - 6M (MY16) FT4 Cab - BPF11333
GreenStar Ready Universal Guidance Kit, Upgradeable - John Deere or Competitive Models  - BPF10139
Harness - Field Doc Connect - PF90277
Harness for Field Doc ConnectHarness for Field Doc Connect
Harness - GreenStar Lightbar 4 Pin Extension - PF90937
Harness - StarFire 300 (1.8 Meter) - PF90857
Harness - StarFire Position Receiver Extension (30 cm) - BPF10200
Harness - StarFire Position Receiver Radar Adapter - PF90350

Harvest Sensor Kits

Combine Moisture Sensor Retrofit Kit - 50 Series - PF90872
Combine moisture sensor retrofit kit on 50 SeriesCombine moisture sensor retrofit kit on 50 Series
Combine Sensor Kit - 50 Series - PF90874

First introduced in 1995, Combine Yield Monitoring and Combine Yield Mapping were John Deere’s first precision farming products. It is capable of monitoring or mapping yield and moisture on many of the older John Deere combines as field-installed attachments.

 

Harvest Monitor™ and Harvest Doc™ – 9060 Series Combines

*Harvest Monitor and Harvest Doc is retrofittable to 50 Series Combines

 

Functionality includes multi-client functionality, boundary recording, and weather and field condition recording as well as compatibility to GreenStar™ guidance products.

 

Harvest Monitor enables the operator to view yield and moisture while harvesting. It consists of the following components:

  • Grain tank-mounted moisture sensor
  • Mass flow sensor
  • GreenStar display
  • Associated brackets and harnesses

Harvest Doc enables the operator to record yield and moisture with GPS and later load the information into desktop software as maps and reports. To upgrade from Harvest Monitor to Harvest Doc, the following additional components are necessary:

 

StarFire™ Receiver

  • Apex™ desktop software
  • GreenStar display
Combine Sensor Kit - 60 or 70 Series - PF90873

First introduced in 1995, Combine Yield Monitoring and Combine Yield Mapping were John Deere’s first precision farming products. It is capable of monitoring or mapping yield and moisture on many of the older John Deere combines as field-installed attachments.

 

Harvest Monitor™ and Harvest Doc™ – 9060 Series Combines

*Harvest Monitor and Harvest Doc is retrofittable to 50 Series Combines

 

Functionality includes multi-client functionality, boundary recording, and weather and field condition recording as well as compatibility to GreenStar™ guidance products.

 

Harvest Monitor enables the operator to view yield and moisture while harvesting. It consists of the following components:

  • Grain tank-mounted moisture sensor
  • Mass flow sensor
  • GreenStar display
  • Associated brackets and harnesses

Harvest Doc enables the operator to record yield and moisture with GPS and later load the information into desktop software as maps and reports. To upgrade from Harvest Monitor to Harvest Doc, the following additional components are necessary:

 

StarFire™ Receiver

  • Apex™ desktop software
  • GreenStar display
Combine Sensor Kit - 9400, 9500, or CTS Models (PIN 639999 and Below) - PF90866

First introduced in 1995, Combine Yield Monitoring and Combine Yield Mapping were John Deere’s first precision farming products. It is capable of monitoring or mapping yield and moisture on many of the older John Deere combines as field-installed attachments.

 

Harvest Monitor™ and Harvest Doc™ – 9060 Series Combines

*Harvest Monitor and Harvest Doc is retrofittable to 50 Series Combines

 

Functionality includes multi-client functionality, boundary recording, and weather and field condition recording as well as compatibility to GreenStar™ guidance products.

 

Harvest Monitor enables the operator to view yield and moisture while harvesting. It consists of the following components:

  • Grain tank-mounted moisture sensor
  • Mass flow sensor
  • GreenStar display
  • Associated brackets and harnesses

Harvest Doc enables the operator to record yield and moisture with GPS and later load the information into desktop software as maps and reports. To upgrade from Harvest Monitor to Harvest Doc, the following additional components are necessary:

 

StarFire™ Receiver

  • Apex™ desktop software
  • GreenStar display
Combine Sensor Kit - 9400, 9500, or CTS Models (PIN 640000 and Above) - PF90867

First introduced in 1995, Combine Yield Monitoring and Combine Yield Mapping were John Deere’s first precision farming products. It is capable of monitoring or mapping yield and moisture on many of the older John Deere combines as field-installed attachments.

 

Harvest Monitor™ and Harvest Doc™ – 9060 Series Combines

*Harvest Monitor and Harvest Doc is retrofittable to 50 Series Combines

 

Functionality includes multi-client functionality, boundary recording, and weather and field condition recording as well as compatibility to GreenStar™ guidance products.

 

Harvest Monitor enables the operator to view yield and moisture while harvesting. It consists of the following components:

  • Grain tank-mounted moisture sensor
  • Mass flow sensor
  • GreenStar display
  • Associated brackets and harnesses

Harvest Doc enables the operator to record yield and moisture with GPS and later load the information into desktop software as maps and reports. To upgrade from Harvest Monitor to Harvest Doc, the following additional components are necessary:

 

StarFire™ Receiver

  • Apex™ desktop software
  • GreenStar display
Combine Sensor Kit - 9410, 9510, or CTS II Models - PF90871

First introduced in 1995, Combine Yield Monitoring and Combine Yield Mapping were John Deere’s first precision farming products. It is capable of monitoring or mapping yield and moisture on many of the older John Deere combines as field-installed attachments.

 

Harvest Monitor™ and Harvest Doc™ – 9060 Series Combines

*Harvest Monitor and Harvest Doc is retrofittable to 50 Series Combines

 

Functionality includes multi-client functionality, boundary recording, and weather and field condition recording as well as compatibility to GreenStar™ guidance products.

 

Harvest Monitor enables the operator to view yield and moisture while harvesting. It consists of the following components:

  • Grain tank-mounted moisture sensor
  • Mass flow sensor
  • GreenStar display
  • Associated brackets and harnesses

Harvest Doc enables the operator to record yield and moisture with GPS and later load the information into desktop software as maps and reports. To upgrade from Harvest Monitor to Harvest Doc, the following additional components are necessary:

 

StarFire™ Receiver

  • Apex™ desktop software
  • GreenStar display
Combine Sensor Kit - 9410, 9510, or CTS II Models (PIN 675000 and Above) - PF90870

First introduced in 1995, Combine Yield Monitoring and Combine Yield Mapping were John Deere’s first precision farming products. It is capable of monitoring or mapping yield and moisture on many of the older John Deere combines as field-installed attachments.

 

Harvest Monitor™ and Harvest Doc™ – 9060 Series Combines

*Harvest Monitor and Harvest Doc is retrofittable to 50 Series Combines

 

Functionality includes multi-client functionality, boundary recording, and weather and field condition recording as well as compatibility to GreenStar™ guidance products.

 

Harvest Monitor enables the operator to view yield and moisture while harvesting. It consists of the following components:

  • Grain tank-mounted moisture sensor
  • Mass flow sensor
  • GreenStar display
  • Associated brackets and harnesses

Harvest Doc enables the operator to record yield and moisture with GPS and later load the information into desktop software as maps and reports. To upgrade from Harvest Monitor to Harvest Doc, the following additional components are necessary:

 

StarFire™ Receiver

  • Apex™ desktop software
  • GreenStar display
Combine Sensor Kit - 9600 Models (PIN 639999 and Below) - PF90864

First introduced in 1995, Combine Yield Monitoring and Combine Yield Mapping were John Deere’s first precision farming products. It is capable of monitoring or mapping yield and moisture on many of the older John Deere combines as field-installed attachments.

 

Harvest Monitor™ and Harvest Doc™ – 9060 Series Combines

*Harvest Monitor and Harvest Doc is retrofittable to 50 Series Combines

 

Functionality includes multi-client functionality, boundary recording, and weather and field condition recording as well as compatibility to GreenStar™ guidance products.

 

Harvest Monitor enables the operator to view yield and moisture while harvesting. It consists of the following components:

  • Grain tank-mounted moisture sensor
  • Mass flow sensor
  • GreenStar display
  • Associated brackets and harnesses

Harvest Doc enables the operator to record yield and moisture with GPS and later load the information into desktop software as maps and reports. To upgrade from Harvest Monitor to Harvest Doc, the following additional components are necessary:

 

StarFire™ Receiver

  • Apex™ desktop software
  • GreenStar display
Combine Sensor Kit - 9600 Models (PIN 640000 and Above) - PF90865

First introduced in 1995, Combine Yield Monitoring and Combine Yield Mapping were John Deere’s first precision farming products. It is capable of monitoring or mapping yield and moisture on many of the older John Deere combines as field-installed attachments.

 

Harvest Monitor™ and Harvest Doc™ – 9060 Series Combines

*Harvest Monitor and Harvest Doc is retrofittable to 50 Series Combines

 

Functionality includes multi-client functionality, boundary recording, and weather and field condition recording as well as compatibility to GreenStar™ guidance products.

 

Harvest Monitor enables the operator to view yield and moisture while harvesting. It consists of the following components:

  • Grain tank-mounted moisture sensor
  • Mass flow sensor
  • GreenStar display
  • Associated brackets and harnesses

Harvest Doc enables the operator to record yield and moisture with GPS and later load the information into desktop software as maps and reports. To upgrade from Harvest Monitor to Harvest Doc, the following additional components are necessary:

 

StarFire™ Receiver

  • Apex™ desktop software
  • GreenStar display
Combine Sensor Kit - 9610 Models - PF90869

First introduced in 1995, Combine Yield Monitoring and Combine Yield Mapping were John Deere’s first precision farming products. It is capable of monitoring or mapping yield and moisture on many of the older John Deere combines as field-installed attachments.

 

Harvest Monitor™ and Harvest Doc™ – 9060 Series Combines

*Harvest Monitor and Harvest Doc is retrofittable to 50 Series Combines

 

Functionality includes multi-client functionality, boundary recording, and weather and field condition recording as well as compatibility to GreenStar™ guidance products.

 

Harvest Monitor enables the operator to view yield and moisture while harvesting. It consists of the following components:

  • Grain tank-mounted moisture sensor
  • Mass flow sensor
  • GreenStar display
  • Associated brackets and harnesses

Harvest Doc enables the operator to record yield and moisture with GPS and later load the information into desktop software as maps and reports. To upgrade from Harvest Monitor to Harvest Doc, the following additional components are necessary:

 

StarFire™ Receiver

  • Apex™ desktop software
  • GreenStar display
Combine Sensor Kit - 9610 Models (PIN 675000 and Above) - PF90868

First introduced in 1995, Combine Yield Monitoring and Combine Yield Mapping were John Deere’s first precision farming products. It is capable of monitoring or mapping yield and moisture on many of the older John Deere combines as field-installed attachments.

 

Harvest Monitor™ and Harvest Doc™ – 9060 Series Combines

*Harvest Monitor and Harvest Doc is retrofittable to 50 Series Combines

 

Functionality includes multi-client functionality, boundary recording, and weather and field condition recording as well as compatibility to GreenStar™ guidance products.

 

Harvest Monitor enables the operator to view yield and moisture while harvesting. It consists of the following components:

  • Grain tank-mounted moisture sensor
  • Mass flow sensor
  • GreenStar display
  • Associated brackets and harnesses

Harvest Doc enables the operator to record yield and moisture with GPS and later load the information into desktop software as maps and reports. To upgrade from Harvest Monitor to Harvest Doc, the following additional components are necessary:

 

StarFire™ Receiver

  • Apex™ desktop software
  • GreenStar display
Cotton Stripper Harvest Doc Kit - 7460 Model - BPF10237

Today’s producers demand more and with GreenStar™ technology and John Deere delivers. With GreenStar components, customers have the ability to document and map harvest data, create prescriptions, set field boundaries and more. This translates to better management practices, better yields, and more profit.

Harvest Doc Cotton
 
The Harvest Doc Cotton yield mapping system from John Deere Ag Management Solutions (AMS) gives cotton producers the ability to see harvest data right from the cab. Using yield data collected by the machine, detailed cotton yield maps can be generated in Apex™ Farm Management software to help producers make more informed decisions.

Harvest Doc Cotton-ready machines are equipped with mass-flow sensors that monitor cotton flow through the machine’s air ducts. This information is then sent to the display in the cab for operator viewing.

 

Machine compatibility:

  • Both the 7760 and 7660 Cotton Pickers are Harvest Doc Cotton ready, straight from the factory.
  • The 7460 Cotton Stripper is available with a field-installed attachment to make it Harvest Doc Cotton ready.

 For Harvest Doc Cotton functionality, the following GreenStar components are also needed:

  • StarFire™ 3000 or StarFire™ iTC receiver
  • GreenStar 3 (GS3) 2630 or GreenStar 2 (GS2) 2600 Display
  • Data card or universal serial bus (USB) drive

NOTE: Harvest Doc Cotton-ready machines are equipped with mass-flow sensors and associated brackets, cab signal combiner module (SCM), StarFire receiver bracket, GS2/GS3 mounting bracket, and lightbar adapter harness.
 
GreenStar displays 

 

The GreenStar 3 (GS3) 2630 Display provides the operator with a number of items, including lint yield, load weight, GPS and recording status, cotton variety, area, and distance covered. All of this information can be compiled within the Harvest Doc Cotton system.

 

The GS3 2630 Display is fully compatible with both the 7760 and 7660.

 

StarFire receivers

 

StarFire receivers help producers track in-field productivity using GPS and GLONASS satellite signals.

 

In Harvest Doc Cotton, StarFire receivers' georeference yield data is captured by the mass flow sensors. This information is transferred to the cab display, which can then give operators yield data relative to field position.

 

To accommodate a wide range of accuracy needs and to offer unmatched upgradeability, the StarFire 3000 Receiver is available in different configurations: SF1 and SF2 ready.

 

Apex Farm Management software
 
In the office, Apex Farm Management software is used to generate detailed yield data.

The cotton yield map from Apex shows yield variance throughout the field. Also, printed on the map is the total number of acres harvested, harvest date, average yield, and harvest hours for the operator, farm, and field.

Cotton Yield Sensor Kit - 9986 or 9996 Models (6-Row ONLY) - PF90882
Cotton yield sensor kit for 9986 or 9996 models Cotton yield sensor kit for 9986 or 9996 models

Machine Communication Radio

Machine Communication Radio All Makes Kit - BPF10776

Machine Control

Combine Hydro Handle for Machine Sync Application - BPF10405
John Deere Machine Sync 3/4 Bin Fill Kit - 70 Series Combine (MY'08 or MY'09) - BPF10504

StarFire RTK Kits

Base Station Kit for RTK Radio 900 - BPF10838
Base Station Kit for RTK Radio 900 with Tripod - BPF10837
Hi-Gain Base Antenna - PF91105
High-gain base antennaHigh-gain base antenna
Magnetic Rover Antenna - John Deere RTK Radio 900 - PF90347
RTK Dual Radio Harness - BPF10029
RTK dual radio harnessRTK dual radio harness
RTK Radio Extension Harness - 50 Ft. - PF90450
RTK Tripod with Labels - PF90886
RTK tripod with labelsRTK tripod with labels

PF80762 - Storage case for original GreenStar™ common components

RTK Universal Base Station Bundle 450 - PF91099
RTK Universal StarFire Mounting Bracket - PF90885
RTK universal StarFire mounting bracket RTK universal StarFire mounting bracket
Repeater Kit for RTK Radio 900 - BPF10839